Nokia SLIDE 2220 User manual

Nokia 2220 slide User Guide

Issue 3.1

Contents

Safety 3

Support 4

Get started 4

Insert SIM card and battery 4

Charge the battery 4

Antenna 5

Headset 5

Magnets and magnetic fields 6

Keys and parts 6

Access codes 7

Switch on and off 8

Standby mode 8

Keypad lock 8

Functions without a SIM card 9

Applications running in background 9

Calls 9

Make and answer a call 9

Loudspeaker 9

Dialling shortcuts 10

Write text 10

Text modes 10

Traditional text input 10

Predictive text input 10

Navigate the menus 11

Messaging 11

Text and multimedia messages 11

Flash messages 12

Nokia Xpress audio messages 12

E-mail 13

Instant messaging 13

Voice messages 13

Message settings 13

Contacts 14

Call log 14

Settings 15

Profiles 15

Tones 15

Display 15

Date and time 15

Shortcuts 15

Synchronisation and backup 16

Connectivity 16

Call and phone 16

Accessories 17

Configuration 17

Restore factory settings 17

Operator menu 17

Gallery 18

Media 18

Camera and video 18

FM radio 19

Voice recorder 19

Music player 20

Applications 21

Organiser 21

Alarm clock 21

Calendar and to-do list 22

Web or Internet 22

Connect to a web service 22

SIM services 23

Green tips 23

Save energy 23

Recycle 23

Learn more 23

Product and safety information 24

Index 31

2Contents

Safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read

the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or when

it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while

driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless devices may be susceptible to interference, which could affect

performance.

SWITCH OFF IN RESTRICTED AREAS

Follow any restrictions. Switch the device off in aircraft, near medical

equipment, fuel, chemicals, or blasting areas.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ACCESSORIES AND BATTERIES

Use only approved accessories and batteries. Do not connect incompatible

products.

WATER-RESISTANCE

Your device is not water-resistant. Keep it dry.

Safety 3

Support

When you want to learn more about how to use your product or you are unsure how

your device should function, see the user guide or see the support pages at

www.nokia.com/support or your local Nokia website, or with a mobile device,

www.nokia.mobi/support.

If this does not resolve your issue, do the following:

•Restart the device: switch off the device, and remove the battery. After about a

minute, replace the battery, and switch on the device.

•Restore the original factory settings as explained in the user guide.

If the issue remains unsolved, contact Nokia for repair options. See www.nokia.com/

repair. Before sending your device for repair, always back up the data in your device.

Get started

Insert SIM card and battery

Safe removal. Always switch the device off and disconnect the charger before removing

the battery.

The SIM card and its contacts can be easily damaged by scratches or bending, so be

careful when handling, inserting, or removing the card.

1 Remove the back cover by lifting it from the top end of the device (1).

2 Remove the battery (2).

3 Open the SIM card holder, and insert the SIM card (3). Ensure that the contact surface

on the card is facing down and that the bevelled corner on the card is facing toward

the top of the device. Close the holder (4).

4 Insert the battery (5), and replace the back cover (6).

Charge the battery

Your battery has been partially charged at the factory. If the device indicates a low

charge, do the following:

4 Support

1 Connect the charger to a wall outlet.

2 Connect the charger to the device.

3 When the device indicates a full charge, disconnect the charger from the device,

then from the wall outlet.

You do not need to charge the battery for a specific length of time, and you can use the

device while it is charging. If the battery is completely discharged, it may take several

minutes before the charging indicator appears on the display or before any calls can be

made.

Antenna

Your device may have internal and external antennas. Avoid touching the antenna area

unnecessarily while the antenna is transmitting or receiving. Contact with antennas

affects the communication quality and may cause a higher power level during operation

and may reduce the battery life.

The figure shows the antenna area marked in grey.

Headset

Warning:

When you use the headset, your ability to hear outside sounds may be affected. Do not

use the headset where it can endanger your safety.

When connecting any external device or any headset, other than those approved by

Nokia for use with this device, to the Nokia AV Connector, pay special attention to volume

levels.

Get started 5

Do not connect products that create an output signal as this may cause damage to the

device. Do not connect any voltage source to the Nokia AV Connector.

Magnets and magnetic fields

Keep your device away from magnets or magnetic fields.

Keys and parts

1End/Power key

2Navi™ key (scroll key)

3Display

4Earpiece

5Selection keys

6Call key

7Keypad

6Getstarted

8Camera lens

9Loudspeaker

10 Microphone

11 Charger connector

12 Headset connector/Nokia AV Connector (3.5 mm)

Note: Avoid touching this connector as it is intended for use by authorised service

personnel only.

Access codes

The security code helps to protect your phone against unauthorised use. The preset code

is 12345. You can create and change the code, and set the phone to request the code.

Keep the code secret and in a safe place separate from your phone. If you forget the

Get started 7

code and your phone is locked, your phone will require service and additional charges

may apply. For more information, contact a Nokia Care point or your phone dealer.

The PIN code supplied with the SIM card protects the card against unauthorised use.

The PIN2 code supplied with some SIM cards is required to access certain services. If you

enter the PIN or PIN2 code incorrectly three times in succession, you are asked for the

PUK or PUK2 code. If you do not have them, contact your service provider.

The module PIN is required to access the information in the security module of your SIM

card. The signing PIN may be required for the digital signature. The barring password

is required when using the call barring service.

To set how your phone uses the access codes and security settings, select Menu >

Settings > Security.

Switch on and off

Press and hold the power key.

Standby mode

When the phone is ready for use, and you have not entered any characters, the phone

is in the standby mode.

1Network signal strength

2Battery charge level

3Network name or operator logo

4Functions of selection keys

The left selection key, Go to, allows you to access the functions in your personal shortcut

list. When viewing the list, select Options > Select options to view the available

functions, or select Options > Organise to arrange the functions in your shortcut list.

Keypad lock

Lock the keypad

Close the slide, and select Lock within 5 seconds to lock the keypad.

Unlock the keypad

Select Unlock > OK, or open the slide. If the security keyguard is activated, enter the

security code when requested.

8Getstarted

Set automatic keypad lock

Select Menu > Settings > Phone > Automatic keyguard > On, and set the length of

time, after which the keypad locks.

Answer a call when the keypad is locked

Press the call key. When you end or reject the call, the keypad locks automatically.

When the device or keypad is locked, calls may be possible to the official emergency

number programmed into your device.

Functions without a SIM card

Some functions of your phone may be used without inserting a SIM card, such as

Organiser functions and games. Some functions appear dimmed in the menus and

cannot be used.

Applications running in background

Leaving applications running in the background increases the demand on battery power

and reduces the battery life.

Calls

Make and answer a call

Make a call

Enter the phone number, including the country and area code if necessary, and press

the call key.

Answer an incoming call

Press the call key.

Reject a call

Press the end key.

Adjust the volume

During a phone call, scroll up or down.

Loudspeaker

If available, you may select Loudsp. or Normal to use the loudspeaker or the earpiece

of the phone during a call.

Warning:

Continuous exposure to high volume may damage your hearing. Listen to music at a

moderate level, and do not hold the device near your ear when the loudspeaker is in

use.

Calls 9

Dialling shortcuts

Assign a phone number to a number key

Select Menu > Contacts > Speed dials, scroll to a desired number (2-9), and select

Assign. Enter the desired phone number, or select Search and a saved contact.

Activate speed dialling

Select Menu > Settings > Call > Speed dialling > On.

Make a call using speed dialling

In the standby mode, press and hold the desired number key.

Write text

Text modes

To enter text (for example, when writing messages) you can use traditional or predictive

text input.

When you write text, press and hold Options to switch between traditional text input,

indicated by , and predictive text input, indicated by . Not all languages are

supported by predictive text input.

The character cases are indicated by , , and .

To change the character case, press #. To change from the letter to number mode,

indicated by , press and hold #, and select Number mode. To change from the

number to the letter mode, press and hold #.

To set the writing language, select Options > Writing language.

Traditional text input

Press a number key, 2-9, repeatedly until the desired character appears. The available

characters depend on the selected writing language.

If the next letter you want is located on the same key as the present one, wait until the

cursor appears, and enter the letter.

To access the most common punctuation marks and special characters, press 1

repeatedly. To access the list of special characters, press *.

Predictive text input

Predictive text input is based on a built-in dictionary to which you can also add new

words.

1 Start writing a word, using the keys 2to 9. Press each key only once for one letter.

2 To confirm a word, scroll right or add a space.

10 Write text

Popular Cell Phone manuals by other brands

Zte

Zte BLADE A520 quick start guide

Blackbe;rry

Blackbe;rry KEYone Safety and product information

Bea-fon

Bea-fon X5 Premium quick guide

Blackbe;rry

Blackbe;rry 8707 Series user guide

Blackbe;rry

Blackbe;rry Storm Troubleshooting

LG LM-X420QN user guide

LifeWatch

LifeWatch V user guide

Bea-fon

Bea-fon SILVER LINE SL860 user guide

IKI Mobile

IKI Mobile KF4.5i user manual

Hitech

Hitech HT-850 user guide

Yezz

Yezz Fashion F10 user manual

Point Mobile

Point Mobile PM60 user manual

Blackbe;rry

Blackbe;rry Q10 user guide

Blackbe;rry

Blackbe;rry Bold 9900 user guide

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 user guide

LG LM-K420EMW user guide

ISAFE MOBILE

ISAFE MOBILE IS655.2 operating manual

LG Thrive user manual