Nokia NPL-4 Series Installation instructions

Nokia Customer Care

NPL-4/5/RM-104 Series Transceivers

Disassembly Instructions

NPL-4/5/RM-104

Disassembly Instructions Nokia Customer Care

Table of Contents

Page No

Disassembling Instructions ................................................................................................................... 3

Exchange of System Connector........................................................................................................... 5

Reassembly procedure .........................................................................................................................6

Nokia Customer Care NPL-4/5/

Disassembling Instructions

Note! Do not open the unit if you don’t have a torque driver, which is

capable of 32 Ncm, but send the product to the appropriate service sup-

plier with higher service level.

Attention!

It is not allowed to open the unit more than once, oth-

erwise the unit is not splash proofed any more and has

to be sent to the appropriate

service supplier with higher service level. Always use

new screws for assembly.

Press the grip markings on both sides of the B-Shell and

remove B-Shell.

Remove Keymat. Remove the A-Shell.

Unscrew the six screws, using the order shown and a

screwdriver TORX PLUS® size 6.For assembly, the reverse

order and a torque of 32Ncm have to be used.

Take away the UI Module Assy with Engine Module.

NPL-4/5/RM-104

Disassembly Instructions Nokia Customer Care

Separate the UI-Module from Engine Module carefully,

because of the board-to board-connector.

Push out the LCD by using a clean cloth.

Protect LCD with a film. Remove the Speaker with Kirk Boot. Note the guiding

when assembling.

Use tweezers to remove Speaker from Kirk Boot. Use a slotted screwdriver as a lever to open the Camera

Shield.

Camera Module is attached with four snaps into its

guidance. Place SRT-10 as shown in the picture and unlock

the snaps on both sides. Note releasing order.

Use tweezers to take away the Camera module.

Nokia Customer Care NPL-4/5/

Exchange of System Connector

(PICTURE EXAMPLES TAKEN FROM Nokia 5100, NPM-6)

The System Connector is attached with double-sided

adhesive gasket to C-Cover. Also note the gasket on

C-Cover.

Press SRT-6 between C-Cover and System Connector and

remove Battery Cover.

Press again SRT-6 between C-Cover and System Connector

and remove System Connector.

Remove System Connector.

To remove the remaining adhesive gasket use SRT-6 only.

Do not use sharp-edged tools for this procedure.

Remove protection foil from System Connector.

NPL-4/5/RM-104

Disassembly Instructions Nokia Customer Care

Reassembly procedure

Reassembly takes place in reversed order compared to disassembly.

Place System Connector to its guidance exactly. Now press connector to C-Cover firmly, while taking care

not to slip C-Cover on your table.

Other manuals for NPL-4 Series

This manual suits for next models

Table of contents

Popular Cell Phone manuals by other brands

Zte

Zte BLADE A520 quick start guide

Blackbe;rry

Blackbe;rry KEYone Safety and product information

Bea-fon

Bea-fon X5 Premium quick guide

Blackbe;rry

Blackbe;rry 8707 Series user guide

Blackbe;rry

Blackbe;rry Storm Troubleshooting

LG LM-X420QN user guide

LifeWatch

LifeWatch V user guide

Bea-fon

Bea-fon SILVER LINE SL860 user guide

IKI Mobile

IKI Mobile KF4.5i user manual

Hitech

Hitech HT-850 user guide

Yezz

Yezz Fashion F10 user manual

Point Mobile

Point Mobile PM60 user manual

Blackbe;rry

Blackbe;rry Q10 user guide

Blackbe;rry

Blackbe;rry Bold 9900 user guide

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 user guide

LG LM-K420EMW user guide

ISAFE MOBILE

ISAFE MOBILE IS655.2 operating manual

LG Thrive user manual