Nexo PS10 User manual
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 1 OF 4
VNI-WS10
DP3422/Rev01 - DI
PS10 Wall Bracket
Contents:
X1 (Arm)
X1 (Adapter)
X1
X3
X2
X1
X1
X1
X1
X1
Weight: 1.35 kg / 3 lb
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 2 OF 4
Dimensions:
Adapter mounting
•Remove 2 screws from the PS10 and use the 2 screws
and the 2 washers provided to fix the adapter.
•Please, do not push on the 2 screws while screwing
them, to avoid disengaging the bolt that is inside the
cabinet.
•WARNING: Screws must be secured using Loctite 243TM
Mounting position
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 3 OF 4
Adapter / Arm mounting
For the wall mount of VNI-WS10, please select screws and mounting location supporting 4 times the system
weight.
Tighten well to cancel any float between the arm and the adapter.
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 4 OF 4
Safety device
Use the parts provided
•NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself.
•Please check the web site nexo-sa.com for the latest update.
Other Nexo Speakers manuals
Nexo
Nexo MSUB18 Series User manual
Nexo
Nexo ePS8 User manual
Nexo
Nexo Up to 3x L20 Rigging System User manual
Nexo
Nexo ePS10 User manual
Nexo
Nexo VNI-WB02 User manual
Nexo
Nexo IDS108 User manual
Nexo
Nexo P15-TIS User manual
Nexo
Nexo MSUB18 Series User manual
Nexo
Nexo ePS8-EN54 User manual
Nexo
Nexo ePS6 User manual
