NETGEAR XAVB2602 User manual
Powerline AV+ 200 Nano Dual-Port Set
XAVB2602 Installation Guide
© 2011 NETGEAR, Inc. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form or by
any means without the written permission of NETGEAR, Inc.
DO NOT stack equipment, or place equipment in tight spaces or in drawers.
Be sure your equipment is surrounded by at least 2 in. of air space.
Technical Support
Thank you for choosing NETGEAR. To register your product, get the latest
product updates, or get support online, visit us at http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries):
See http://support.netgear.com/app/answers/detail/a_id/984.
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks
and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the
United States and/or other countries. Information is subject to change without
notice. Other brand and product names are registered trademarks or
trademarks of their respective holders. © 2011 NETGEAR, Inc. All rights
reserved.
Statement of Conditions
In the interest of improving internal design, operational function, and/or
reliability, NETGEAR reserves the right to make changes to the products
described in this document without notice. NETGEAR does not assume any
liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
3
Package Contents
Products sold in some locations include a
Resource CD.
XAV2602 and XAV1601
Powerline 200 Mbps Adapters
Ethernet cables (2)
UK France Germany/Europe Australia Switzerland
4
Your XAV2602 Powerline adapter might look like one of these:
5
XAV2602 Hardware Features
Filtered AC socket
Power LED
Powerline LED
Ethernet LED
Security button
Factory Reset
button
Ethernet Port 1
for higher
priority traffic
Ethernet Port 2
for lower-
priority data
traffic
6
XAV1601 Hardware Features
Filtered AC socket
Ethernet port
Security button
Power LED
Ethernet LED
Powerline LED
Factory Reset
button
7
LEDs
The LEDs indicate the status of your Powerline adapters.
• When you plug in the adapter, the Power LED lights up and
turns green.
• The adapter is not active when no Ethernet link has occured for
more than 10 minutes. The adapter enters power saving mode
and the Power LED turns amber .
• The Ethernet LED lights up when you connect a powered-on
Ethernet device to at least one Ethernet port.
• The Powerline LED turns on when the adapter detects at least
one other compatible Powerline device.
The Pick A Plug feature lets you pick the electrical outlet with the
strongest link rate, indicated by the color displayed by the
Powerline LED:
- Green: Link rate > 80 Mbps (Best)
- Amber: Link rate > 50 and < 80 Mbps (Better)
- Red: Link rate < 50 Mbps (Good)
8
Install Your Powerline Adapters
This room has an XAV1601
Powerline adapter
connected to a router.
Room 1
The ports use Quality
of Service (QoS) to
prioritize traffic. Port
1 on the left is the
high-priority video
port.
You can plug a
power strip into
the filtered outlet,
but do not plug
your Powerline
adapter into a
power strip.
The filtered AC
socket removes
some electrical
noise. Plugging a
nearby device into
the filtered AC
socket improves
performance.
This room has an XAV2602 Powerline Adapter.
R
oom
2
9
10
Secure Your Powerline Network
A Powerline network forms when at least two compatible Powerline
devices communicate. After the Powerline network is up and running,
you can use the Security buttons on the adapters to add encryption to
your Powerline network.
NETGEAR recommends that you secure your Powerline network to
protect your personal information and media from unwanted access.
If you do not set up security on your network, anyone nearby with a
Powerline network can potentially use his or her connection to gain
access to your network and information you send over the Internet.
This is especially relevant in settings such as apartment buildings,
office buildings, dorm rooms, and other populated areas.
CAUTION: Do not press the Security button until each adapter has
powered up and its Power LED is solid green. Pressing this
button too soon can temporarily disable Powerline
communication. If this occurs, use the Factory Reset button
to return the Powerline adapter to its factory default settings.
Other manuals for XAVB2602
1
Table of contents
Other NETGEAR Adapter manuals
NETGEAR
NETGEAR XE602 - Powerline Ethernet Adapter User manual
NETGEAR
NETGEAR 85 Mbps Wall-Plugged Ethernet Adapter XE103 User manual
NETGEAR
NETGEAR WG111 User manual
NETGEAR
NETGEAR XAV5601 User manual
NETGEAR
NETGEAR FA120 User manual
NETGEAR
NETGEAR WG111v3 - 54 Mbps Wireless USB 2.0 Adapter Operation manual
NETGEAR
NETGEAR AX743 - ProSafe 10 Gigabit Ethernet User manual
NETGEAR
NETGEAR GA302T User manual
NETGEAR
NETGEAR EA101C User manual
NETGEAR
NETGEAR RangeMax WNDA3100 User manual
NETGEAR
NETGEAR XAV1601 User manual
NETGEAR
NETGEAR XAV2501 - Powerline AV Ethernet Adapter User manual
NETGEAR
NETGEAR WN511B - Next Wireless Pc Card User manual
NETGEAR
NETGEAR RangeMax WPNT511 User manual
NETGEAR
NETGEAR A7000 User manual
NETGEAR
NETGEAR Powerline 500 Nano User manual
NETGEAR
NETGEAR RANGEMAX WPN111 Manual
NETGEAR
NETGEAR GA622T - Copper Gigabit Ethernet Card User manual
NETGEAR
NETGEAR WNCE2001 - Ethernet to Wireless Adapter Operation manual
NETGEAR
NETGEAR MA 101 User manual
