NEC SV 8100 User manual
Instructions for NEC SV 8100 Telephone System Commonly Used Features
1- To Make an Outside Call :
1- Lift Handset or Press Speaker Button.
2- Dial 9 and Telephone Number.
3- Wait for Called Party to Answer.
4- Speak to Called Party
2- To Intercom an Extension :
1- Lift Handset or Press Speaker Key.
2- Dial the 3 Digit Extension Number.
3- Speak With Called Party.
3- To Set Up Your Voicemail Box :
1- Press the Gray Plastic Soft Key that corresponds
To the LCD Display Characters ‘ VMSG ‘
2- Press the Soft Key ‘ GREET ‘
3- Press the Soft Key ‘ GR 1 ‘
4- Press the Soft Key ‘ REC ’. Listen for Beep Tone
Then record a Custom Greeting. When Finished
With Greeting, Press the Speaker Key When
Done.
4- To Check Voice Mail From Your Telephone :
1- Press the ‘ VMSG ‘: Soft Key.
2- Press ‘ LSTN ’ Soft Key.
3- After Listening to the Message, The VM Will
Automatically Save Message or You Can Press
The ‘ DEL ’ Soft Key to Erase the Message.
4- Press ‘ NEXT ‘ Soft Key if More Than One
VM Message is in Your Mailbox. Follow Voice Prompts.
5- To Check Voice Mail Remotely :
1- Dial Main Telephone Number
2- When The Auto Attendant Answers, Dial # and
Your 3 Digit Extension Number.
3- Follow Spoken Prompts as You Would at Your Desk
6- Park / Hold a Call for Another Extension :
1- Answer the Ringing Call.
2- Press Park 1, Park 2 or Park 3 Key.
3- Dial Extension Number of Person to Receive Call.
4- Announce “Call Parked on Park 1 (2or3) for you”.
OR
1- Answer the Ringing Call
2- Press Park 1, park 2 or Park 3 Key.
3- Press the Page Button and Announce “ Call for “John”
on Park 1 (2or3) “
NOTE : When the Call is Retrieved from Park, The Button is Available for use again.
7- To Transfer a Call :
1- Answer Ringing Call
2- Press Transfer Key.
3- Dial 3 Digit Extension Number, Announce Who is on the Line.
4- Hang up. The Call is Now Ringing at That Person’s Extension
5- They Pick up Call and Converse.
8- To Transfer a Caller Directly to Voice Mail :
1- Answer the Incoming Call.
2- Press Transfer Key
3- Dial the 3 Digit Extension Number Followed
By The Number 8 Then Hang up.
4- Caller Now in Voice Mail Box.
9- To Call Forward Your extension to Another Extension :
1- At Extension Being Forwarded, Handset Hung Up,
Press “Down Arrow” icon (extreme right button under LCD
Screen.)
2- Press “PROG” Button.
3- Press “CFWD” Button.
4- Press “ALL” Button
5- Press “SET” Button or “CNCL” Button as Desired
6- Turn Off “SPEAKER” Button.
7- The Extension is Now Forwarded.
07.10.12
Table of contents
Other NEC Telephone manuals
NEC
NEC Univerge SV8100 User manual
NEC
NEC SL1100 Owner's manual
NEC
NEC DT730 Instruction manual
NEC
NEC Aspire 4TXH User manual
NEC
NEC Dterm Series i User manual
NEC
NEC NEAXMail AD-40 User manual
NEC
NEC Elite IPK User manual
NEC
NEC 28i User manual
NEC
NEC XEN IPK ANALOGUE TELEPHONE User manual
NEC
NEC ITL-12D-1 - DT730 - 12 Button Display IP... Setup guide
NEC
NEC Univerge SV9100 User manual
NEC
NEC UX5000 User manual
NEC
NEC NEAX2400 ICS Specification sheet
NEC
NEC AT-50 User manual
NEC
NEC XEN IPK DIGITAL TELEPHONE User manual
NEC
NEC ElectraElite IPK Owner's manual
NEC
NEC Univerge SV9100 User manual
NEC
NEC SL1100 User manual
NEC
NEC IPK II User manual
NEC
NEC Univerge SV8100 User guide
