NEC Express5800/120Rh-2 Instruction Manual
System Release Notes
Express5800/120Rh-2
System Release Notes
PN: 455-01826-000
Proprietary Notice and Liability Disclaimer
The information disclosed in this document, including all designs and related materials, is
the valuable property of NEC Solutions (America), Inc. and/or its licensors. NEC Solutions
(America), Inc. and/or its licensors, as appropriate, reserve all patent, copyright and other
proprietary rights to this document, including all design, manufacturing, reproduction, use,
and sales rights thereto, except to the extent said rights are expressly granted to others.
The NEC Solutions (America), Inc. product(s) discussed in this document are warranted in
accordance with the terms of the Warranty Statement accompanying each product.
However, actual performance of each product is dependent upon factors such as system
configuration, customer data, and operator control. Since implementation by customers of
each product may vary, the suitability of specific product configurations and applications
must be determined by the customer and is not warranted by NEC Solutions (America), Inc.
To allow for design and specification improvements, the information in this document is
subject to change at any time, without notice. Reproduction of this document or portions
thereof without prior written approval of NEC Solutions (America), Inc. is prohibited.
Trademarks
Windows 2003 and Windows NT are registered trademarks of Microsoft Corporation.
SCO OpenServer is a trademark of Caldera Systems, Inc.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks
of their respective trademark owners.
August 2005
Copyright 2005
NEC Solutions (America), Inc
10850 Gold Center Drive, Suite 200,
Rancho Cordova, CA 95670
All Rights Reserved
Express5800/120Rh-2
System Release Notes
The Express5800/120Rh-2 System Release Notes provide up-to-date information
on your system. These notes also provide additional valuable information about
your system that was not included in the user’s guide.
Please read these notes in their entirety.
CONTENTS
Introduction ............................................................................................................................................3
General Comments.................................................................................................................................3
Advisories...............................................................................................................................................3
EXPRESSBUILDER.........................................................................................................................3
Notices and Restrictions.........................................................................................................................4
(This page is intentionally left blank.)
Introduction
These System Release Notes cover the following topics:
General Comments
Advisories
Notices and Restrictions
General Comments
The following general comments apply to this server.
Versions of the Network Operating Systems tested and recommended are:
⎯ Windows®2003
Microsoft Windows® 2000 and NT© 4.0 are not supported.
SCO OpenServer™5.06 is not supported.
Advisories
EXPRESSBUILDER
The following advisories apply to EXPRESSBUILDER.
Windows 2003 must be installed using EXPRESSBUILDER Express Setup
to take full advantage of NEC specific software for your server.
Note: This advisory does not apply if your operating
system was preloaded at the factory.
If you already have an operating system installed when creating a
maintenance partition, EXPRESSBUILDER will warn you of the existing
partition. If you want to preserve the installed operating system, do not
create the maintenance partition or the existing operating system will be
overlaid by the maintenance partition.
The Administrator Menu in the System Information Management segment
of the Offline Maintenance Utility is accessible only by NEC authorized
service representatives.
EXPRESSBUILDER operates in floppy emulation mode. The emulated
floppy drive portion of your system CD-ROM is designated Drive A and the
remaining portion(s) of the CD-ROM is designated Drive Q. Your system
diskette drive is Drive B. After creating the Off-line Maintenance Utility
diskette, EXPRESSBUILDER prompts you to remove the diskette from
Drive B. At this prompt, remove the diskette from your diskette drive.
Express5800/120Rh-2 System Release Notes 3
4Express5800/120Rh-2 System Release Notes
Notices and Restrictions
The following restrictions apply to the Express5800/120Rg-2. Please read the list of restrictions
below carefully to ensure that they are followed.
List of Restrictions
Functions
1 Standby / Sleep modes are not supported.
If you have any questions about this restriction, please contact your sales representative.
Other manuals for Express5800/120Rh-2
4
Table of contents
Other NEC Server manuals
NEC
NEC N8100-1220F User manual
NEC
NEC NECCare Gold Express5800/320Fd User manual
NEC
NEC N8100-1223F User manual
NEC
NEC Univerge SV8100 User manual
NEC
NEC NEC Express5800 Series User manual
NEC
NEC 5800 Series User manual
NEC
NEC Express5800/R320c-M4 User manual
NEC
NEC NEC Express5800 Series User manual
NEC
NEC Express5800 120Li User manual
NEC
NEC EXP339 User manual
NEC
NEC Express5800/ftServer Service manual
NEC
NEC Express5800/R120h-2M Operating manual
NEC
NEC EXPRESS5800/140He User manual
NEC
NEC SX-Aurora TSUBASA A300-4 User manual
NEC
NEC Express 5800 User manual
NEC
NEC Express5800/R320c-E4 User manual
NEC
NEC Express5800/A1040e User manual
NEC
NEC NEC Express5800 Series User manual
NEC
NEC Express5800/R120h-1M 3rd-Gen User manual
NEC
NEC NEC Express5800 Series Operating manual
