NEC WL1700-MS User manual

(WL1700-MS)

Installation Guide

NWA-027515-001

ISSUE 1.0

LIABILITY DISCLAIMER

NEC Infrontia Corporation reserves the right to change the specifica-

tions, functions, or features, at any time, without notice.

NEC Infrontia Corporation has prepared this document for use by its

employees and customers. The information contained herein is the

property of NEC Infrontia Corporation, and shall not be reproduced

without prior written approval from NEC Infrontia Corporation.

All brand names and product names on this document are trade-

marks or registered trademarks of their respective companies.

For more information about trademarks and service marks, refer to

here.

NEC Infrontia Corporation

Introduction

IMPORTANT

Use this product in agreement with the Software License Agreement attached,

included or presented upon purchase of this product.

The correspondence of product name and model type which indicate the same

equipment is listed below.

In this manual, product names will be used to indicate each equipment.

Product Name Model Type

WL5100 SN8149 WLCEB-A

WL1500-AP SN8146 WLAPEA-A

WL1700-MS SN8147 WLAPEB-A

Introduction

Software License Agreement

IMPORTANT Please read the following Software License Agreement before

using this software.

Product Name: UNIVERGE WL Controller

Licenser: NEC Infrontia Corporation (hereinafter referred to as NEC-i)

This Software License Agreement (hereinafter referred to as “Agreement”) is a

legal agreement between you (regardless of whether you are individual or entity)

and NEC-i regarding the software defined below (hereinafter referred to as

“Licensed Program”)

The Licensed Program is preinstalled in the UNIVERGE WL Controller

(hereinafter referred to as “Product”). Once you use the Licensed Program, it is

deemed that you have agreed to the terms and conditions of this Agreement. If

you do not agree to the terms and conditions of this Agreement, you will not be

allowed to use the Licensed Program.

Software License Agreement

Introduction

iii

Definition of the Licensed Program:

The Licensed Program is preinstalled on the Product, and any printed material

(including any documents such as manual) and electronic file attached to the

Product, upgrades, bug fix releases, and revised version of the Licensed Program

(“Upgraded Version” as a generic term), and one back-up copy of the Licensed

Program.

Grant of License:

NEC-i hereby grants you, in consideration of and subject to this Agreement, the

following limited, non-exclusive, worldwide perpetual rights:

(1) to use the Licensed Program for the purpose of internal use only; and

(2) to make only one copy of the Licensed Program to elective devices or media

only for its back-up purposes.

Rights and Restrictions:

lNo reverse engineering, decompiling and disassembling: You are not

allowed to reverse-engineer, decompile or disassemble the Licensed

Program.

lProhibition of separating the Licensed Program: Because the Licensed

Program is part of this Product indivisibly, you are not allowed to

separate the Licensed Program from the Product.

lRental: You are not allowed to rent, lease or loan the Licensed Program

to any third person.

lProhibition of sharing the Licensed Program: You are not allowed to

share the Licensed Program with multiple users in any manner such as

remote access.

lSublicense: You are not allowed to sublicense the Licensed Program to

any third person.

Introduction

lHandover of the Licensed Program: You are entitled to permanently

assign all rights provided in this Agreement to third person only if (i) you

permanently assign the Licensed Program with the Product you own, and

(ii) such third person entirely agrees to the terms and conditions of this

Agreement. After such assignment of the Licensed Program, you are not

allowed to keep any part of the Licensed Program (including back-up

copy) unless purchasing another Licensed Program.

lTermination: NEC-i has the right to terminate this Agreement without

any compensation to you at any time, in the event that you commit any

breach of the terms and conditions hereof. Moreover, when this

Agreement has been terminated by any reason, you shall immediately

cease using the Licensed Program and destroy the Licensed Program, its

back-up copy and all of its components.

lWarranty: NEC-i EXPRESSLY MAKES NO WARRANTY TO THE

LICENSED PROGRAM. The support and maintenance of the Product

will be performed by NEC-i in accordance with the support and

maintenance agreement, if NEC-i and you agree to the terms and

conditions thereof separately.

IN NO EVENT SHALL NEC-I AND ITS DISTRIBUTORS BE LIABLE

TO YOU FOR INDIRECT, SPECIAL, INCIDENTAL,

CONSEQUENTIAL OR PUNITIVE DAMAGES (INCLUDING LOSS

OF PROFITS) WHETHER BASED ON CONTRACT, TORT, OR ANY

OTHER LEGAL THEORY, AND EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. The maximum aggregate liability

of NEC-i and its distributors, whether in tort, contract or otherwise, shall

not exceed one hundred percent (100 %) of the price actually paid for

purchasing the Product by you. UNLESS OTHERWISE EXPRESSLY

SET FORTH IN THIS AGREEMENT, NEC-I AND ITS

DISTRIBUTORS HEREBY DISCLAIMS ANY AND ALL

WARRANTIES WITH RESPECT TO THE LICENSED PROGRAM,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO,

WARRANTIES OF MERCHANBILITY, FITNESS FOR A

PARTICULAR PURPOSE AND NONINFRINGEMENT.

lIntellectual Property: All copyrights and other intellectual property

rights of the Licensed Program and its reproduction are held and reserved

by NEC-i and/or its suppliers. None of the intellectual property rights

shall be transferred to you under this Agreement.

Introduction

lExport: You shall not export the Product, Licensed Program or its

reproduction or any part of them to any foreign countries without the

permission of the government of Japan, your country and/or related

countries, as the case may be.

lProhibition of Weapon Related Use: You shall not use all or any part of

the Licensed Program and technologies associating with design and/or

usage of the Licensed Program for purposes related to arms manufacture.

Moreover, you shall not provide or allow to use any third person

intending to use the Licensed Program for weapon or arms manufacture

with all or any part of the Licensed Program and technologies used in

design and usage of this program in any manner or in any condition.

This Agreement is governed and construed by the laws of Japan.

If there is any question regarding this Agreement, please contact us in writing to

the address below for further assistance.

Data Wireless Networks Division

NEC Infrontia Corporation

Tsutsumidouri 1-19-9, Sumida-ku,

Tokyo, Zip: 131-8533

Japan

Introduction

Before Using the Products

It is forbidden to reproduce all or any part of this document without permission.

lWays of Discarding

lConsumables

lU.S. Export Control Laws

lWarnings Regarding Exporting

lUse in Medical Institutions

lPlease Understand the Situation Beforehand

lUsing the Equipment Safely

lUNIVERGE WL Controller

lUNIVERGE WL Access Point

lSecurity Precautions Regarding Wireless LAN

lSoftware License Agreement for This Product

lRegistered Trademarks and Service marks

Discarding the Model

When discarding the UNIVERGE WL Wireless Controllers and the UNIVERGE

WL Access Points, follow the procedure in compliance with the regulations of the

local government. For more information, contact the local government.

Consumables

Some parts in our Product, such as cooling fan and internal battery, need to be

exchanged due to life span. We advise you to exchange those parts regularly for

stable operation. For more information on parts exchange and life-span, contact

our distributor or maintenance service company.

Introduction

vii

U.S. Export Control Laws

Some of our Products may be subject to U.S. export control laws, including the

U.S. Export Administration Act and its associated regulations. Depending on the

country to export, permission from the U.S. government may be needed.

Warnings Regarding Exporting

The Product (includes software) may fall under the category of export regulations

when exporting or taking overseas, due to regulations by foreign currency

exchange and export-related laws such as foreign commerce laws. Customer

agrees to comply strictly with all regulations required by Export Trade Control

Ordinance effective at that time and acknowledges that it has the responsibility to

obtain license from the Japanese government to export the Product.

Contact our distributor or our local dealer when taking this Product (includes

software) overseas.

Use in Medical Institutions

This device is not intended to affect human life and provide high degree of

reliability. Using medical device, nuclear facility or equipment, aero space

equipment, and transport equipment is not intended.

NEC Infrontia Corporation assumes no responsibility for injury or death, fire

accident or social harm as a result of using the Product for above purposes.

For your facility, device and control system, it is requested that every feasible

precaution be taken in the pursuit of redundancy design, fire safety design,

malfunction prevention design and other safety-related designs.

Please understand the situation beforehand

NEC Infrontia Corporation assumes no responsibility for economic damage

caused by communication lost due to the equipment failure, malfunction, and

other trouble, as well as external factors such as blackout of commercial power.

Moreover, any responsibility cannot be taken in our company about the loss

generated as a result of mistaking the use and the setting method of this product.

Introduction

viii

Using the Equipment Safely

Equipment

Do not touch the Product or electric plug

with wet hands. It may cause electric shock.

Never disassemble or alter the Project. It is

very dangerous and may result in fire, electric

shock and equipment failure.

Do not put other equipment on top of this

Product. Heat retention causes fire and

equipment failure.

Do not block the Product's ventilation duct.

Internal temperature rises, and may cause fire.

May cause personal injury,

system damage, or loss of data.

Incorrect use of the equipment may cause

electric shock.

Incorrect use of the equipment may cause

ignition.

White-out symbols indicate commands

and directions. (The left symbol indicates

ground connections.)

Indicates prohibited acts.

(The left symbol prohibits disassembly.)

WARNING

Incorrect use of the equipment may cause personal injury

or a serious system fault.

DANGER

Incorrect use of the equipment may cause personal injury

or death.

The following safety information describes

how to prevent danger and damage to

your properties.

ٟSafety Symbol

Learn the meaning of the following symbols

and then read this section carefully before

using the equipment. Do not plug too many leads into a single

socket using branched plug sockets.

AC socket will overheat and may cause fire

and electric shock.

Insert sockets securely into the AC sockets.

Bad connection causes the electric plug and

socket to heat up. Metallic objects touching

the socket blades may cause fire and electric

shock.

Always hold the plug securely when disconnecting

from socket. Moreover, do not process, bend,

twist or pull the electric cords. Damage to the cords

may cause fire and electric shock.

ٟPrecautions for use

DANGER

Electricity Source

Use the Product at AC100V-240V.

Never use at other power levels. Fires, electric

shock and system failure may result when used

at incorrect power levels.

Table of contents

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual