NEC RWC-3217 User manual
Thank you very much for purchasing Air Conditioner.
Before please read this User
carefully, and keep it for future reference.
installing and using this appliance,
Manual
SWINGSWING
OFFON/
MODE
TIMER
FAN
SPEED
F
HR
Window (Room) Air Conditioner
User Manual
RWC-3217
RWC-4717
2
3
CONTENTS
Safety Precautions
Operating Instructions
Parts Name
Care and Maintenance
5
8
Trouble Shooting
Installation Instructions
10
11
Operation Tips 9
1
SWING
SWING
OFF
ON/
MODE
TIMER
FAN
SPEED
FF
HRHR
2
Symbols in this User's Manual are interpreted as shown below:
Be sure not to do.
The feature of the appliance,
instead of a fault.
Pay attention to such a situation.
Grounding is necessary.
Be sure to follow the instruction.
Do not use the power supply circuit
breaker or pull off the plug to turn it off
during operation. This may cause a fire
due to spark, etc.
Keep the power supply circuit breaker
or plug from dirt. Connect the power
supply cord to it firmly and correctly,
lest an electric shock or a fire break out
due to insufficient contact.
Otherwise, serious faults maybe occur
Use correct power supply according to the
rating plate.
or a fire maybe break out.
Do not knit, pull or press the power supply
cord, lest the power supply cord be broken.
An electric shock or fire is probably caused
by a broken power supply cord.
Never insert a stick or similar to the unit.
Since the fan rotates at high speed, this
may cause an injury.
Do not repair the appliance by yourself.
If this is done incorrectly, it may cause
an electric shock, etc.
Turn off the appliance first before cutting
off power supply when malfunction occurs.
It is harmful to your health if the cool air
reaches you for a long time. It is advisable
to let the air flow be deflected to all the room.
Prevent the air flow from reaching the gas
burners and stove.
Do not touch the operation buttons
when your hands are wet.
Pull off the plug to stop it when
the operation is abnormal
( a peculiar odor is smelled, etc.),
or it may cause an electric shock, etc.
It is the user's responsibility to make the
appliance be grounded according to
local codes or ordinances by a licenced
person.
Warning: Incorrect handling could
cause a serious hazard, such as death,
serious injury,etc.
SWING
SWING
OFF
ON/
MODE
TIMER
FAN
SPEED
FF
HRHR
SWING
SWING
OFF
ON/
MODE
TIMER
FAN
SPEED
FF
HRHR
SWING
SWING
OFF
ON/
MODE
TIMER
FAN
SPEED
FF
HRHR
SWING
SWING
OFF
ON/
MODE
TIMER
FAN
SPEED
FF
HRHR
Safety Precautions
ÅÅË®×ì
Note: The figure in this manual are based on the external view of a standard model.
Consequently, the shape may differ from that of the air conditioner you have selected.
Air Outlet
Fig. 1
Control Panel
Power Cord
Interior
Air Inlet
Grille
Horizontal Air Vane
Vertical Air Vane
Front view
Fresh air lever
Exterior Air Inlet
Exterior Air Inlet
Remote Controller
SWING
SWING
OFF
ON/
MODE
TIMER
FAN
SPEED
FF
HRHR
For remote control model
3
Parts Name
Air Filter handle
Fresh air lever
SWING
SWING
OFF
ON/
MODE
TIMER
FAN
SPEED
FF
HRHR
Shut the fresh air door to achieve the best
cooling effect and open it to introduce fresh
air into the room if the air is foul inside .
Fresh air lever
SHUT OPEN
Fresh air lever
Pull out
Push in
Fig.1 Fig.2
ÅÅË®×ì
Outside Air Outlet
Drainage Tip
Exterior Air Inlet
1.Accessories
Back view
4
Parts Name
MODE button
Each time MODE button is pressed, the operation
mode is changed in sequence:
COOLING FAN ONLY ENERGY SAVING COOLING
NOTE: After setting the mode, allow 3
minutes before switching to another mode.
NOTE: Temperature setting range is from 19 (66 ) to 31 (88 ).
FAN SPEED button
Used to select fan speed in sequence auto, low,
medium and high.
SWING button
Used to select start or stop vertical air vanes swinging.
TIMER button
Used to set or cancel timer operation.
When the unit is in operation, you can set OFF TIMER.
When the unit is off, you can set ON TIMER.
Timer setting range is 0 to 24 hours.
If the OFF TIMER is set, the timer LED displays
the remaining time to turn off the unit for only
12 seconds, then LED shifts to display set temperature.
If the ON TIMER is set, the timer LED displays
the remaining time to turn on the unit.
If you want to cancel ON TIMER, press TIMER button again.
Used to set room temperature in COOLING mode or used to set time in TIME R mode.
If the two keys are pressed at the same time,the temperature LED display will alternate between
and .
ON/OFF button
The air conditioner will be started when it is energized
or will be stopped when it is in operation, if you press
this button.
You can easily operate this air conditioner by pressing
relevant button on the control panel as well as the
remote controller.
Indication symbols of LED on control panel:
High fan speed
Medium fan speed
Low fan speed
Auto fan speed Cooling
Fan only Display set temp
Display set timer
Timer
Above LED lights on when the relevant mode is in used.
Energy-saving
Button
Control Panel
SWING
SWING
OFFON/
MODE
TIMER
FAN
SPEED
F
HR
CC
C
HR
But the mark of " "or" "you can not change.Usually ,those models used 220V~/50Hz marked with
" ",others models marked with " ".
Remote Control Model
5
Operating Instructions
Power
Mode
+
_
Temp/Time
Auto
Power Saver
Mid
High Low
Timer
Fan Speed
The remote controller transmits signals to the system.
1
1
2
3
8
2
3
5
6
8
Buttoms
POWER Buttom
MODE Buttom
TIMER Buttom
The appliance will start when it is
energized or will stop when it is
in operation, if you press this button.
Used to select the operation mode.
Used to set or cancel timer operation..
Remote Controller
4HIGH Buttom
Used to select the mode.high fan speed
5MID Buttom
Used to select the Mid mode.fan speed
6LOW Buttom
Used to select the Low mode.fan speed
7AUTO Buttom
Used to select the Auto mode.fan speed
9POWER Buttom
Used to select the mode.Energy-saving
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
4
7
9
Used to set room temperature in COOLING
mode or used to set time in TI MER mode.
Used to select start or stop vertical air vanes swinging.
10
Swing
10
SWING Buttom
6
Operating Instructions
Remote control
How to Insert the Batteries
Remove the battery cover according to the arrow direction.
Insert new batteries making sure that the (+) and (-) of battery
are matched correctly.
Reattach the cover by sliding it back into position.
Note:
Use 2 LR6 AA(1.5volt) batteries. Do not use rechargeable batteries. Re-
place batteries with new ones of the same type when the display beco-
mes dimor effective resoponce.
If the replacement is done within 1 minute, the remote control will keep
original presetting.
How to Use
To operate the room air conditioner , aim the remote control
to the signal receptor.
The remote control will operate the air conditioner at a dis-
tance of up to 23 feet when pointing at signal receptor of indoor
unit.
Signal receptor
SWING
SWING
OFF
ON/
MODE
TIMER
FAN
SPEED
FF
HRHR
7
Operating Instructions
8
Unplug from power source
Front panel maintenance Air filter maintenance
Take out air filter as shown
Stop operation and
take out air filter.
Wipe with a soft and dry cloth
Use lukewarm water
(below 40 C) to clean
if the air conditioner
is very dirty.
Unplug from power
source after switch off
the air conditioner.
Never use volatile substance
such as gasoline or polishing
powder to clean the appliance.
Clean and reinstall the air filter.
If the dirt is conspicuous,
wash it with a solution of
detergent in lukewarm water.
After cleaning, dry well in
shade.
soft cloth to
clean it.
Use a dry and
SWING
SWING
OFF
ON/
MODE
TIMER
FAN
SPEED
FF
HRHR
Care and Maintenance
9
Noise pollution
Operating condition
The protective device maybe trip and stop
the appliance in the cases listed below. The noise level of air conditioner sounds
higher at night than in the daytime.
Please set (LOW FAN SPEED) or
(FAN ONLY) mode at night in order
to decrease noise.
COOLING
o
Outdoor air temperature is over *43 c
o
Room temperature is below 18 c
You need to wait 3 minutes before restarting.
(Note : If you let the appliance on after power cut, the compressor may be burned)
Features of protector
Caution
The protective device will work at following cases.
Restarting the unit at once after operation stops or changing mode during operation, you need to
wait 3 minutes.
Connect to power supply and turn on the unit at once, it may start 20 seconds later.
Use proper fuse
Do not use wire or anything else instead of fuse. Otherwise, air conditioner will be damaged,
or cause stock, fire, etc.
If the air conditioner runs in COOLING or DRY mode with
door or window opened for a long time when relative
humidity is above 80%,dew may drip down from the outlet.
*For Tropical (T3) Climate condition models, the
temperature point is 52 instead of 43 .
Operation Tips
This manual suits for next models
1
Table of contents
Other NEC Air Conditioner manuals
Popular Air Conditioner manuals by other brands
Fujitsu
Fujitsu Inverter ASBA30JFC operating manual
Toshiba
Toshiba RAS-M10SMUV-E installation manual
Daikin
Daikin FXLQ20MAVE Operation manual
Hitachi
Hitachi RAS-E24CAK instruction manual
CIAT
CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance
Bestron
Bestron AAC6000 instruction manual
