Nauticam NA-DP4 User manual
0
1
Thank you for your purchase of a NAUTICAM housing.
At NAUTICAM, we pride ourselves on the ability to recognise the re uirements of
professional as well as amateur underwater photographers and fulfill them
through the innovative designs of our products. We strive to achieve a high level
of user-friendliness by allowing stress-free installation and easy operation of all
important functions of the camera.
Each housing is individually inspected and water pressure tested to ensure
optimum uality.
Please read this manual carefully before using the housing, this will maximise its
performance as well as its lifetime.
2
1. All NAUTICAM Products are warranted against any material and manufacturing
defects for one year from the date of purchase for consumer use.
2. NAUTICAM accepts no liability for any damage to and defects in the housing
caused by improper use and/or poor maintenance; it is the responsibility of the
owner to carefully follow the instructions in this manual.
3. NAUTICAM does not hold responsibility for damage, of any nature, to any
e uipment used with and/or placed within the housing.
4. NAUTICAM accepts no liability for any loss of captured images or the inability
to capture images even if it is due to the malfunctioning or leakage of the
housing.
5. This warranty only applies to products purchased from authorised NAUTICAM
dealers and does not extend beyond the original retail purchaser.
6. Unauthorised modifications and/or repairs of the housing will automatically
invalidate this warranty.
7. To return products for service, please contact our regional distributor,
normally you would need to notify them by email first and ship them the
product by registered mail, along with your contact details and a brief
description of the defect.
3
1. NA-DP4 housing
2. Standard HDMI bulkhead with M16 thread with cap
3. HDMI (D-C) cables (110mm, 130mm, 190mm)
4. Instruction manual
5. Spare silicone rubber main o-ring
6. O-ring remover
7. CR2032 battery (for moisture alarm)
8. Lubricant
Spare silicone rubber o-ring
Lubricant CR2032 battery
HDMI bulkhead with M16
thread with cap
HDMI cables (110mm,
130mm, 190mm)
O-ring remover
4
1. A water-tight test without the monitor inside the housing is highly
recommended when using the system for the first time and after the changing
of port and O-ring(s).
2. Do not use lubricants from other brands with the silicone rubber O-ring on this
housing, only use the lubricant provided by NAUTICAM.
3. Discontinue use immediately should you notice any leakage.
4. Store the housing in a robust, shock-proof container during transportation;
avoid transporting with any e uipment, such as a camera, inside the housing.
5. When travelling by air, do not close the housing as this may lead to a pressure
difference between the atmosphere and inside the housing.
6. Care must be taken when opening the housing, as pressure may build up inside
the housing which increases the opening force.
7. Do not open the product in a wet or sandy environment. Protect the interior
from moisture and debris in order to prevent malfunction or leakage.
8. Do not store the product in an environment of high humidity.
9. Do not leave the housing and the monitor in direct sunlight for prolonged
periods.
10. Keep out of reach of children, failure to do so could result in injury.
11. Defective products should be shipped to our distributors for service,
unauthorized disassembling and/or modifications could result in malfunction
or leakage.
5
1 On/ off button 7 Present B button
2 Monitor hood (optional) 8 Menu button
3 Ball joint 9 Moisture alarm window
4 Cap for HDMI cable 10 Housing lock safety button
5 HDMI cable 11 Housing lock
6 Back/ Preset A button 12 Navigation wheel
1
3
2
8
4
5
11
12
9
7
6
10
6
All Nauticam housings with M16 accessory port are compatible with the NA-DP4. For camera
housings with M14 or 1/2inch thread size of accessory ports, specific socket extensions and
HDMI bulkhead are also available. Each set of NA-DP4 Housing is supplied with three
different lengths of HDMI cables for camera output. The list of Nauticam Housings and
corresponding suggested length of HDMI cable are as follow:
Compatible Nauticam
housing model
Thread size of
accessory port
Suggested length of
HDMI cable
NA
-
D4
M16
190mm
NA
-
D800
M16
190mm
NA
-
D7000V
M16
190mm
NA
-
V1
***
M16
110mm
NA
-
5DIII
M16
190mm
NA
-
7D
M16
190mm
NA
-
600D
M16
190mm
NA
-
NEX7
***
M16
130mm
NA
-
RX100V*
*
M16
200mm
NA
-
GH2***
M16
190mm
** A specific HDMI bulkhead and HDMI cable are included in the NA-RX100V housing.
*** A socket extension (P.N.: 25028) and custom bulkhead (P.N.: 25032) is re uired to use
with NA-DP4 housing.
Product Numbers:
P N
Descriptions
17901 NA-DP4 housing for SmallHD 4.3'' monitor with HDMI bulkhead and cables
17911 Monitor hood for NA-DP4 housing
25028 Socket extension for 25032 HDMI bulkhead with M16 thread
25029 Socket extension for HDMI bulkhead with M14 thread
25031 Socket extension for HDMI bulkhead with 1/2'' thread
25032 Custom HDMI bulkhead to use with socket extension
25033 Standard HDMI bulkhead with M16 thread
25034 HDMI (D-C) cable in 110mm length
25035 HDMI (D-C) cable in 130mm length
25036 HDMI (D-C) cable in 190mm length
25037 M17-16 step down adaptor
7
1. After verifying that the main O-ring is in good condition, lightly coat it with the
lubricant provided.
2. Make sure the O-ring groove located in the front part of the housing is free
from any foreign material; the groove can be cleaned with the aid of a
microfiber cloth.
3. Place the main O-ring into the groove, first at the corners, then the whole
perimeter.
4. Plug the HDMI cable into the monitor before placing the monitor into the
housing.
8
For installing the standard HDMI bulkhead with M16 thread:
ii.
T
ighten
the HDMI bulkhead
w
ith
a spanner.
iii.
Connect the HDMI cable to
the HDMI bulkhead.
i.
Unscrew the M16 plug from the
threaded hole with a coin.
9
For installing the custom HDMI bulkhead to use with extension (NA-NEX7 for
example):
iv.
Connect the HDMI cable to the
camera's HDMI connector.
i.
Unscrew the
M
16
plug from the
thread hole with a coin.
ii.
T
ighten
the socket extension to
the camera housing with a
spanner.
Other Nauticam Camera Accessories manuals
Nauticam
Nauticam NA-7DMKII User manual
Nauticam
Nauticam NA-GX1 User manual
Nauticam
Nauticam 36207 User manual
Nauticam
Nauticam 16301 RC815-Z CANON EF 8-15MM F/4L FISHEYE USM ZOOM... User manual
Nauticam
Nauticam NA-FHD5 User manual
Nauticam
Nauticam NA-D90 User manual
Nauticam
Nauticam 45 Viewfinder User manual
Nauticam
Nauticam NA-EM5 User manual
Nauticam
Nauticam M24D2R200 User manual
Nauticam
Nauticam NA-GFX100 User manual
Nauticam
Nauticam NA-a1 User manual
Nauticam
Nauticam NA-G9 User manual
Nauticam
Nauticam 21150 User manual
Nauticam
Nauticam NA-RX100IV User manual
Nauticam
Nauticam M28C1R200-M28A1R170 User manual
Nauticam
Nauticam SFE1224GM-Z User manual
Nauticam
Nauticam NA-G5XII User manual
Nauticam
Nauticam SFE1635-Z User manual
Nauticam
Nauticam NA-S1H User manual
Nauticam
Nauticam NA-Z7V User manual
Popular Camera Accessories manuals by other brands
Viltrox
Viltrox EF-NEX Mount instructions
Calumet
Calumet 7100 Series CK7114 operating instructions
Ropox
Ropox 4Single Series User manual and installation instructions
Cambo
Cambo Wide DS Digital Series Main operating instructions
Samsung
Samsung SHG-120 Specification sheet
Ryobi
Ryobi BPL-1820 Owner's operating manual
