Nauticam M67 User manual

This manual suits for next models

1

Other Nauticam Camera Accessories manuals

Nauticam

Nauticam NA-EM5II User manual

Nauticam

Nauticam O1250-Z User manual

Nauticam

Nauticam NA-D7200 User manual

Nauticam

Nauticam NA-XT4 User manual

Nauticam

Nauticam N85 User manual

Nauticam

Nauticam 26301 User manual

Nauticam

Nauticam NA-D6 User manual

Nauticam

Nauticam 87515 User manual

Nauticam

Nauticam NA - R5C User manual

Nauticam

Nauticam NA-EM5III User manual

Nauticam

Nauticam EEF60-F User manual

Nauticam

Nauticam Mounting Ball 17958 User manual

Nauticam

Nauticam 87518 User manual

Nauticam

Nauticam CR1535-Z User manual

Nauticam

Nauticam 17229 User manual

Nauticam

Nauticam 17960 User manual

Nauticam

Nauticam 16345 User manual

Nauticam

Nauticam SLE1424-Z User manual

Nauticam

Nauticam O825-Z User manual

Nauticam

Nauticam NA-A6500 User manual

Nauticam

Nauticam 70 User manual

Nauticam

Nauticam 17909 User manual

Nauticam

Nauticam NA-GFX100 User manual

Nauticam

Nauticam 83223 User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions

Current as of 2019-03-18

Instruction Manual for

M67 Double Flip Holder

for M67 Macro Ports

PN# 25108

FOREWORD

Thank you for your purchase of a NAUTICAM product.

At NAUTICAM, we pride ourselves in the ability to recognize the

requirements of professional as well as amateur underwater

photographers and fulfill them through the innovative designs of our

products. We strive to achieve a high level of user-friendliness by

allowing stress-free installation and easy operation of all important

functions of the camera.

Please read this manual carefully before using the product, this will

maximize its performance as well as its lifetime.

WARRANTY

All NAUTICAM Products are warranted against any material and

manufacturing defects for two years from the date of purchase for

consumer use. This warranty only applies to products purchased from

authorized NAUTICAM dealers and does not extend beyond the original

retail purchaser.

To return your product for service, please contact your regional

authorized service center(s). Please note that this warranty only applies

when the product is purchased in the territory where the service center

is located.

NAUTICAM does not hold responsibility for damage, of any nature, to

any equipment used with and/or placed within our products.

NAUTICAM accepts no liability for any loss of captured images or the

inability to capture images even if it is due to the malfunctioning of our

products.

Unauthorized modifications and/or repairs of our products will

automatically invalidate the warranty.

INSTALL TO THE PORT

1. Press the lever and flip the holder to the side

2. Remove the locking ring from the flip holder

3. Align the two positioning screws on the back

of the holder with the slots on the front of

the port.

The position of the flip holder can be

changed by relocating the two screws in the

threaded holes around holder.

Current as of 2019-03-18

Soak the flip holder in fresh water after each dive and use

air blower to remove any sands or dusts in the hinge part.

*This M67 Double flip holder has been designed to use with

Naticam Wet Lenses, such as MWL, SMC and CMC, which means

that this holder has to support the weight of those lenses. Hence,

tightness of the hinge is necessary and normal.

Remark: All Nauticam product manual will be changed to e-manual in end of

2018. Please download corresponding product manuals on Nauticam.com

website, or contact us for e-manuals.

CARE AND MAINTENANCE

4. Fasten the holder by screwing the locking

ring into the thread on the front of the

port.

5. To un-mount the double flip holder from

the port, reverse the above steps.