Naruiger RG-120T User manual
RG-120-EN Manual V-1.01
Dongguan i-chime electronic co.，ltd 2010-2021
1
RG-120T DC doorbell
RG-120R RG-120T
Features
Power supply: RX 4.5V (AA1.5V x 3),TX 3V(AAA1.5 x 2)
Transmission range:200m（inroom 150m）.
Frequency: 433.92MHz ±150KHz Tolerance
Alarm mode：Music 48
Matching method: learning coding
Applications: Villas, hotels, apartments, office buildings, elderly and child care
RG-120-EN Manual V-1.01
Dongguan i-chime electronic co.，ltd 2010-2021
2
Important
information
Take the time to read this user manual before using this control switch module
Recycling your old device Your device is designed and manufactured with high
quality materials and components that can be recycled and reused.
If a product or its packaging has this symbol with a crossed-out wheeled container,
this means that it is under the CE 2002/96 directive.
inform your municipality about the selective classification system implemented for
electrical and electronic equipment.
Observe current regulations and do not throw your appliances in the trash, the
disposal of your old appliance in accordance with these regulations helps to prevent
possible negative consequences for the environment and health. Batteries should
not be thrown away with domestic garbage. Return them to a collection point for
used batteries.
The <recycling materials> symbol on the plastic packaging elements indicates that
these components are recyclable.
Do not throw them away as normal household garbage.
This symbol on the carton packaging means that the company that has put this
product on the market is financially involved in the selective collection of packaging.
RG-120-EN Manual V-1.01
Dongguan i-chime electronic co.，ltd 2010-2021
3
1.RG-001 Function diagram
RG-120-EN Manual V-1.01
Dongguan i-chime electronic co.，ltd 2010-2021
4
2 .Installation and configuration
2.1．first time to use
Open the RG-120R battery box, install AA1.5V×3, and then open the
RG-120T remote control battery box (rear cover) to install AAA1.5Vx2 batteries.
1.
.There is a notch on the top of the push button. Use the included screwdriver to pry up slightly.
RG-120-EN Manual V-1.01
Dongguan i-chime electronic co.，ltd 2010-2021
5
3.
The transparent cover can be removed and a business card can be inserted to let
visitors know that this is the doorbell of your home ,Fully show your personality
4.
RG-120-EN Manual V-1.01
Dongguan i-chime electronic co.，ltd 2010-2021
6
The transmitter button can be installed with double-sided stickers or
screws (included). The transmitter button adopts an awning design, which is
rainproof
Note:
Please install the transmitter button one meter above the ground;
Don’t install the transmitter button directly on the iron door, but on the wall
next to it, so as not to affect the distance of the remote control.
Don't install the transmitter button next to other electrical appliances.
RG-120-EN Manual V-1.01
Dongguan i-chime electronic co.，ltd 2010-2021
7
2.2 Reconfiguration of RG-120T and RG-120R。
Important note: The new factory RG-120T/R wireless doorbell
transceiver has been configured, so there is no need to re-configure.
You can skip this step.
2.2.1 Reconfiguration of RG-120T/R
2.2.1.1 After installing the battery, press and hold the CODE button of
the RG-120R for 5 seconds, the receiver LED indicator flashes (once per
second), the receiver enters the waiting configuration state, and then
quickly press the transmitter to match the receiver. When the RG-120R
LED indicator is off, the configuration is complete
RG-120-EN Manual V-1.01
Dongguan i-chime electronic co.，ltd 2010-2021
8
2.2.2 Reconfiguration of RG-120，Add second and third receivers
After installing the battery, press and hold the CODE button of the second
RG-120R (5 seconds), the receiver LED indicator flashes (once per second), the
receiver enters the waiting configuration state, then quickly press RG-120 T
button,to configure with the receiver. When the RG-120R LED indicator is off, the
second receiver configuration is complete. Repeat this step to complete the third
receiver configuration.
2.2.3 Reconfiguration of RG-120T/R，Add Second and third transmitter .
After installing the battery, press and hold the CODE button of the RG-120R for 5
seconds, the receiver LED indicator flashes (once per second), the receiver enters
the waiting configuration state, and then quickly press the second RG-120T
button ,to configure with the receiver. When the RG-120R LED indicator is off, the
RG-120-EN Manual V-1.01
Dongguan i-chime electronic co.，ltd 2010-2021
9
second transmitter configuration is completed . Repeat this step to complete the
third transmitter button
RG-120-EN Manual V-1.01
Dongguan i-chime electronic co.，ltd 2010-2021
10
2.2.4 Reconfiguration of RG-120T/R，Change music
Open the back cover (battery box) of the RG-001T, and change the music
every time you press the button on the PCB, There are 48 types of music.( When
the song selection button is pressed for the first time, the original music will be
played, and when it is pressed again, it will switch to the next song.）
2.3.RG-120T/R low voltage reminder
If the RG-120T is not working, when the indicator light of the RG-001R
flashes (twice in 5 seconds), the receiver battery needs to be replaced.
This manual suits for next models
1
Table of contents
Other Naruiger Accessories manuals
