MUTOH ValueJet VJ-1604 Operating instructions

VJ-1604

User

Maintenance

and Cleaning

Guide

Page 1 of 7

ATTENTION: This is a supplementary document and is to be

used in conjunction with the ValueJet 1604 User Operations Manual.

Please refer to Section 4: Daily Maintenance of the Quick Reference

Guide or Section 6: Maintenance of the Operation Manual CD, for

complete step by step instructions for performing these items.

Section 1: Intervals

User Level Maintenance Intervals VJ-1604

1-2 times per week Once a week Every 1-2 Months

□Clean Wiper

□Clean around cap

□Clean Around

PrintHead base

□Replace Flushing Box

Mesh

□Clean Flushing mesh

Section 2: Supplies

1. Supplies for cleaning the VJ-1604 can be purchased as a kit P/N: 11606-0001

2

3

4

5

6

Item #Description Qty

2Foam Swabs 25

3Tweezers 1

4Lint Free Cloth 30

5Flushing Box FoamMesh 1 box of 5

6250ml bottle eco-cleaning1

Rubber Gloves 5 pair

Please Note: If item #5is not present please use Isopropyl Alcohol only.

Page 2 of 7

1

1

Section 3: Cleaning Procedures

** Clean Wiper

Do not touch Wiper. Oil from your hands may prevent the wiper from cleaning the

head properly.

1. The wiper can be cleaned using either the foam swabs or the lint free cloth. Either Eco-

cleaning solution or Isopropyl Alcohol may be used in conjunction with the cleaning

utensil of choice..

2. Wipe the front of the wiper in a horizontal motion.

Foam Swab

Lint Free

Wipe

Page 3 of 7

3. Wipe the back of the wiper in a vertical motion.

Foam Swab

Lint Free

Wipe

Page 4 of 7

** Clean around cap

Do not touch the Rubber Cap. Oil from your hands may prevent the cap from

sealing properly.

1. Using either a foam swab or a lint free cloth soaked in Eco-cleaning solution or Isopropyl

Alcohol, wipe around the edges of the rubber cap. This ensures a good seal is maintained

during head cleaning process.

Foam Swab

Lint Free

Wipe

Page 5 of 7

** Clean around Print Head

CAUTION

•When cleaning around Print Heads

Do Not Touch the Bottom of the heads.

Do Not Clean the Nozzle Surface with the cleaning device.

Do not use water to clean the head. Nozzle clogging may occur

Do Not Re-use dirty foam swabs or lint free cloths

1. Using a foam swab or lint free cloth clean the following areas under the carriage.

•Stainless steel ring around the head

•Space between the print head and the guide ramps

•Bottom sides of the guide ramps

•Any other areas under the print head carriage that appears to have ink or dirt build-up.

Page 6 of 7

2. Pay special attention to the areas on either side of the print head. The small gap between

the print head and the guide ramps can build up large amounts of ink and dust.

* Replace Flush Box Mesh

1. Open the front cover. e flush box mesh using a pair of tweezers.

*

2. Remove and replace th

lease Note: Replace the mesh on the left hand side of the printer as need, if the left

P

side flush box is not used often and the mesh appears clean it does not need changed.

Page 7 of 7

Other manuals for ValueJet VJ-1604

6

Table of contents

Other MUTOH Printer manuals

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide