Multitech MTE-Series User manual



Multitech - MTE-Series Cell Modem



Overview

The purpose of this article is to provide a quick guidance on how to configure Multitech MTE-Series cell modem to

connect it to a Swift Navigation Device and get corrections from Skylark or a third party RTK correction service.



Prerequisites

Ensure device is powered properly to the voltage level suggested by the manufacturer.

Steps

1. Before starting, check with the selected service provider :

a. SIM card APN information, to be used later during cell modem configuration

b. If data plan has been activated on the SIM card to be used.



2. Insert the SIM card on the SIM slot as instructed on the Multitech MTE-Series User Manual.



3. Connect your computer to the cell modem via ethernet cable and turn the device on.



4. On your computer, turn-off your wireless network and enable DHCP on the physical ethernet interface to be used.



5. Open your internet browser and type the following ip : 192.168.2.1

Note : If you are not able to establish connection with the cell modem, check your network settings on your

computer.



6. You will land into the Multitech default credentials screen. Please enter the default username and password as

indicated below:



www.swiftnav.com | [email protected]



Username : admin

Password : admin



7. You will be directed to the main configuration menu screen



8. In order to configure your cell-modem, go to Status >> Networking and then click on the "edit" button the "Wan

Interface IPV4 Network Status" on the far right side of your screen.



9. In top section "Connection with SIM-A Card"



www.swiftnav.com | [email protected]



a. Change Dial-up Profile from Auto-detection to Manual-detection.

b. Change Country to the corresponding one where SIM Card has been purchased, in our case we will select

the "USA".

c. Go to "Service Provider" and select the carrier that fit the one you have purchased.Ensure the information

matches with the information from your SIM and APN information. As soon as one service provider is

selected, it auto populates the rest of the configuration. No further modification are needed in this

section. For example, we have tested it with AT&T.



10. In lower section "3G/4G Connection Common Configuration":

a. Go to "IP Passthrough" and deactivate the checkbox.

b. Right after, ensure "NAT" is "Enable".



11. As mentioned before and for the purpose of this guide, we have selected USA as country and AT&T as service

provider. The configuration for this example will look like the following image:



12. Proceed to Save the configuration. The device will reboot and you will be ready to connect it to your Swift

Navigation Device via ethernet port.



Multitech MTE-Series product listing for this configuration

MTE-LAT2

Region

MTE-LAT2-B07-US

North America



www.swiftnav.com | [email protected]



For technical support or questions in regards to the Multitech cell modem devices, please contact Multitech

Support at https://www.multitech.com/support



www.swiftnav.com | [email protected]



This manual suits for next models

Table of contents

Other Multitech Modem manuals

Multitech

Multitech MultiModem User manual

Multitech

Multitech SocketModem Application guide

Multitech

Multitech MultiConnect microCell MTCM2 User manual

Multitech

Multitech MultiModem Cell MTCBA-E1 User manual

Multitech

Multitech MultiModem iCell User manual

Multitech

Multitech MultiModem ZBA MT9234ZBA User manual

Multitech

Multitech MTD100U User manual

Multitech

Multitech MT56DSU-S User manual

Multitech

Multitech MTD-EV3 QuickCarrier User manual

Multitech

Multitech MultiMobile MT9234MU-CDC User manual

Multitech

Multitech MTCBA-E-U User manual

Multitech

Multitech MTCBA-C-U User manual

Multitech

Multitech MTCMR-H User manual

Multitech

Multitech MultiModem ISIHP-2S User manual

Multitech

Multitech MultiModem ZPX MT9234ZPX-PCIE-NV-CP User manual

Multitech

Multitech MultiModem MT5634ZPX-PCI-U User manual

Multitech

Multitech MT5634ZPX-PCI User manual

Multitech

Multitech Multimobile MT10100ZL-X/E User manual

Multitech

Multitech SocketModem EDGE Instruction Manual

Multitech

Multitech MTCBA-E User manual

Multitech

Multitech MultiModem MT9234ZPX-PCIE User manual

Multitech

Multitech MultiModem MT5634ZPX User manual

Multitech

Multitech Dragonfly MTQ-L4G1 User manual

Multitech

Multitech MultiModem iCell User manual

Popular Modem manuals by other brands

Davicom

Davicom DM562AP Operation manual

EpiValley

EpiValley TATA indicom SXC-1080 user guide

Zte

Zte WiMAX user manual

Intelimax

Intelimax MA-2060 user manual

SMC Networks

SMC Networks D3CM1604V Administrator's manual

Telstra

Telstra Wi-Fi 4G Advanced Pro X user guide

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 user manual

Samsung

Samsung AceLink SAM-335A user guide

Enfora

Enfora Enabler-G Integration guide

iRZ

iRZ ATM2-232 user guide

Zhone

Zhone 6310 installation instructions

Paradyne

Paradyne Hotwire 7976 installation instructions

US Robotics

US Robotics 3453C datasheet

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... user manual

Zte

Zte MF823 user guide

Four-Faith

Four-Faith F1403 user manual

Sierra Wireless

Sierra Wireless AIRLINK MP595W user guide

Gemtek

Gemtek WiMAX WIXFBR-103 user manual