MrCool Advantage Series User manual
Please read this manual carefully before installation and keep it for future reference.
User Manual
Please keep this manual where the operator can easily find it.
Inside you will find helpful hints on how to use and maintain your
unit properly.
Advantage Series
1
When using this air conditioner in the European Union, the following informations must be followed:
•This appliance can be used by children aged 8 years and above and persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made
by children without supervision.
DISPOSAL: Do not dispose of this product as unsorted municipal waste. Collection of such waste
separately for special treatment is legally required.
It is prohibited to dispose of this appliance in domestic household waste. For disposal, there are several
possibilities:
A) The municipality has established collection systems, where electronic waste can be disposed of at
least free of charge to the user.
B) When buying a new product, the retailer will take back the old product at least free of charge.
C) The manufacturer will take back the old appliance for disposal at least free of charge to the user.
D) As old products contain valuable resources, they can be sold to scrap metal dealers.
Wild disposal of waste in forests and landscapes endangers your health when hazardous substances
leak into the ground-water and find their way into the food chain.
READ BEFORE OPERATION
2
SAFETY PRECAUTIONS
Warnings ....................................................................................................................................
Cautions .....................................................................................................................................
NAMES OF PARTS
Indoor unit .................................................................................................................................
Outdoor unit ..............................................................................................................................
Display window ..........................................................................................................................
OPERATING INSTRUCTIONS
Operating temperature.............................................................................................................
Manual operation ......................................................................................................................
Airflow directional control ........................................................................................................
How the air conditioner works ................................................................................................
Special functions ........................................................................................................................
CARE AND MAINTENANCE
Before maintenance...... ............................................................................................................
Cleaning the unit.........................................................................................................................
Cleaning the air filter and air freshening filter .......................................................................
Preparation for extended non-operation................................................................................
Pre-season inspection................................................................................................................
TROUBLESHOOTING TIPS
Troubleshooting tips..................................................................................................................
Troubleshooting guide ..............................................................................................................
3
4
5
5
5
6
6
7
8
9
11
11
11
12
12
13
14
CONTENTS
3
•Remove all dirt from the power plug and plug it
firmly. Soiled plugs can cause fire or an electric
shock.
•In the event of any abnormalities such as smell of
burning, immediately switch off the device and
pull the plug. Contact your service provider.
•Always switch off the device and pull the plug
before you start to clean it.
•Use specified power cord.
•Contact the authorized installer for installation of
this unit.
•Contact an authorized service technician for
repair or maintenance of this unit.
•This appliance is not intended for use by
persons(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
•Children should be supervised to ensure that
they do not play with the air conditioner.
•Do not extend the cable and never use multiple
plugs. A poor electrical connection, poor
insulation or voltage which is higher than
permitted can cause fire.
•Do not expose your body directly to the cool air
for prolonged period.
•Never poke fingers, sticks or other objects in the
air inlet and outlet vents.
•Never attempt to repair, relocate, modify the air
conditioner yourself. Always contact your service
provider if required.
•Never pull the plug out by pulling on the cable.
Hold the plug firmly and pull it out of the plug
socket, otherwise there is a risk of damaging the
cable.
•Do not operate your air conditioner in a wet
room such as a bathroom or laundry room.
WARNING
Strictly prohibited.
Be sure to follow the instructions.
WARNING This symbol indicates the possibility of death or serious injury.
CAUTION This symbol indicates the possibility of injury or damage to property.
To prevent injury to the user or other people and property damage, the following instructions must be
followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The
seriousness is classified by the following indications.
•Meanings of symbols used in this manual are as shown below.
SAFETY PRECAUTIONS
4
•If the air conditioner is to be used in conjunction
with other heaters, the air should be refreshed
periodically, otherwise there is a risk of lack of
oxygen.
•Always pull out the power plug if the unit is not
going to be used for any lengthy period of time.
Collections of dust can cause fire.
•Always switch off the air conditioner and pull out
the power plug during a storm, otherwise,
electrical parts may get damaged.
•Check that the drainage line is correctly
connected. If not, water will escape.
•Check that the condensation water can run off
unhindered. It may cause water damage if the
condensation water cannot run off properly.
•The air conditoner must be earthed in
accordance with the local codes.
•For electrical safety purposes we recommend
that you install an earthleakage circuit-breaker.
•If the power cord is damaged, it must be replaced
by the manufacturer, its service agent or similary
qualified persons in order to avoid a hazard.
•Never touch any switches with a wet hand. It
may cause an electric shock.
•Never use the device for any other purpose than
the intended use.
•Never place food, precision instruments, plants,
animals, paint, etc. on the unit.
•Do not expose plants or animals directly to the
air flow.
•Never clean the air conditioner with water.
•Never use combustible cleaning agents as these
could cause a fire or deformation.
•Never place any burning objects close to the
device if they could be directly affected by the
emitted air.
•Never step onto the outdoor unit and never place
anything on it.
•Never use an unsteady or rusty base.
•Never install the air conditioner in places where
combustible gas can be emitted. Emmitted gas
may collect and cause an explosion.
•Never allow the air conditioner to run for too
long with the doors or windows open, or if the
humidity is very high.
CAUTION
SAFETY PRECAUTIONS
5
Names of parts
Indoor unit:
1. Front panel
2. Air inlet
3. Air filter
4. Air outlet
5. Horizontal air flow grille
6. Vertical air flow louver(inside)
7. Display window
Outdoor unit:
8. Connecting pipe
9. Connecting cable
10. Stop valve
NOTE:
All the pictures in this manual are for explanation
purposes only. The actual shape of the indoor unit
you purchased may be slight different on front panel
and display window. The actual shape shall prevail.
Display window
Digital display:
•Displays the temperature settings when the air
conditioner is operational.
•Displays the room temperature in FAN mode.
•Displays the self-diagnostic codes.
•Displays “ON” for three seconds when Timer ON,
Fresh, Swing, Turbo or Silence feature is activated.
•Displays “OF” for three seconds when Timer OFF is
set.
•Displays “OF” for three seconds when Fresh,
Swing, Turbo or Silence feature is cancelled.
•Displays “dF” under defrosting operation.
•Displays “cF” when anti-cold air feature is
activated under heating mode.
•Displays “SC” during self clean operation (if
applicable).
•Displays “FP” under 8°C heating operation (if
applicable).
(Optional)
According to the operation mode, the “°C”
indicator displays different colors:
•Under Cool or Dry mode, it displays as cool colors.
•Under Heat mode, it displays as a warm color.
Display window
Energy saving display (optional):
Displays when the energy saving feature is
activated. (Not available when the unit does not
have energy saving mode.)
WIFI control display (optional):
Displays when the WIFI control feature is activated.
(Not available when the unit does not have this
function.)
NOTE:
A guide on using the infrared remote is included in this
literature package.
Air inlet (
rear)
Air inlet
(side)
Air inlet
Air outlet
Air outlet
4
3
5
2
6
1
9
10
8
7
NAMES OF PARTS
6
Manual switch
AUTO/COOL
Mode
Temperature
Room temperature
Outdoor temperature
Cooling operationHeating operationDrying operation
(17°C~32°C)
62°F~90°F
(0°C~30°C)
32°F~86°F
(10°C~32°C)
50°F~90°F
(-15°C~30°C)
5°F~86°F
(0°C~50°C)
32°F~122°F
(0°C~50°C)
32°F~122°F
5°F~122°F / -15°C~50°C
(For the models with low
ambient cooling system)
NOTE:
1. Optimum performance will be achieved within these operating temperatures. If air conditioner
is used outside of the above conditions, certain safety protection features might come into
operation and cause the unit to function abnormally.
2. If the air conditioner runs for a long time in cooling mode and the humidity is high (over 80%),
condensed water may drip out of the unit. Please sets the vertical air flow louver to its maximum
angle (vertically to the floor), and set HIGH fan mode.
Suggestion: For the units with an Electric Heater, when the outside ambient temperature is below
32°F (0°C), we strongly recommend you to keep the machine plugged in order to guarantee it
running smoothly.
Operating temperature
Manual operation
Units are equipped with a switch to run emergency operation mode. It can be accessed by opening the
front panel. This switch is used for manual operation in case the remote control fails to work or
maintenance necessary.
NOTE: The unit must be turned off before operating the manual control button. If the unit is operational,
continue pressing the manual control button until the unit is off.
1) Open and lift the front panel up to an angle until it remains fixed with a clicking sound.
2) One press of the manual control switch will lead to the forced AUTO operation. If press the switch twice
within five seconds, the unit will operate under forced COOL operation.
3) Close the panel firmly to its original position.
CAUTION:
•This switch is used for testing purposes only. Please do not use it unless necessary.
•To restore the remote controller operation, use the remote control directly
OPERATING INSTRUCTIONS
7
•Adjust the air flow direction properly, otherwise
it might cause discomfort or cause uneven room
temperatures.
•Adjust the horizontal louver using the remote
control.
•Adjust the vertical louver manually.
Adjusting vertical air flow(Up--Down)
Perform this function while the unit is in operation.
Use the remote control to adjust the vertical air
flow direction. The horizontal louver can move
slightly for each press, or continuously swing up
and down automatically. Please refer to the
“REMOTE CONTROL USER MANUAL” for details.
Adjusting horizontal air flow (left - right)
•Move the deflector rod manually to adjust the air
flow in the direction you prefer.
IMPORTANT: Do not put your fingers into the panel of
the blower and suction side.The high-speed fan inside
may cause injury.
CAUTION
•Do not operate the air conditioner for long
periods with the air flow direction set downward
in cooling or dehumidifying mode. Otherwise,
condensation may occur on the surface of the
horizontal louver causing moisture to drop on to
the floor or on furnishings.
•After a quick restart, the horizontal louver may
remain static for approximately 10 seconds.
•Open angle of the horizontal louver should not be
set too small, as COOLING or HEATING
performance may be reduced due to too
restricted air flow area.
•Do not move the horizontal louver manually,
otherwise the horizontal louver will be out of sync.
But if this happens, please cease operating,
unplug power for a few seconds,then restart the
air conditioner.
Range
Range
Deector rod
Airflow directional control
OPERATING INSTRUCTIONS
8
Basic operation modes: AUTO/COOL/DRY/HEAT (Model
dependent)
AUTO operation
•When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating(cooling/heating
models only), or fan only operation depending on set
temperature and the room temperature.
•The air conditioner will control room temperature
automatically to the temperature point you set.
•If you feel uncomfortable in the AUTO mode, you can set
your desired temperature.
SLEEP operation
When selected, the set temperature will increase (cooling)
or decrease (heating) by 1°C/2°F per hour for the first 2
hours. Thereafter it keeps this new temperature for 5
hours before switching off.
DRYING operation
The temperature is regulated while dehumidifying by
repeating turning on and off of the cooling operation or
fan only. The fan speed is LOW.
HEATING operation
This air conditioner operates on the heat-pump principle,
absorbing heat from air outdoors and transferring that
heat to the indoor unit. As a result, the operating
performance is reduced as outdoor air temperature
drops. If you feel that the heating performance is
insufficient, we recommend you to use this air conditioner
in conjunction with other kinds of heating appliance.
Optimal operation
To achieve optimal performance, please note the
following:
•Adjust the air flow direction correctly so that it is not
torwards people.
•Adjust the temperature to achieve moderate comfort
levels. Excessively low or high temperature waste energy.
•Improve performance by keeping windows and doors
closed.
•Limit energy usage(run time) by using the TIMER function.
•Do not put any object near air inlet or air outlet, as the
efficiency of the air conditioner may be reduced and may
cause the air conditioner to stop running.
•Inspect the air filters periodically, and clean them when
needed.
1 hour
1 hour
Set
Temperature
Set
Temperature
Cooling
Heating
SLEEP operation
1 hour1 hour
SLEEP operation
7 hours timer o
7 hours timer o
How the air conditioner works
OPERATING INSTRUCTIONS
9
Special functions
Refrigerant Leakage Detection (optional)
When refrigerant leakage is detected, the indoor unit will display “EC” code or flash LEDs(model
dependent).
Louver Angle Memory Function (optional)
Within the scope of safety angle, the horizontal louver angle is memoriesed and will return to the
position last selected by user. If it exceeds, it will memorize the boundry of safety angle. This will not
happen when Turbo or manual control buttons are pressed or after a power interruption. So we
strongly suggest that the open angle of the horizontal louver should not be set too small, in case the
condensed water forms and drips from the horizontal louver.
Self Clean Function (optional)
Airborne bacteria use the moisture on the indoor heat exchanger to grow. Regular drying of the
exchanger prevents this growth. By simply pressing the SELF CLEAN button, the system will
automatically manage the process. This cleaning action may be done as frequently as desired.
•For cooling models, only the indoor fan is active in low speed for 30 minutes and the unit turns off
automatically.
•For cooling & heating models, the unit will operate as in the following sequence:
FAN mode at Low fan speed--Heating operation with LOW fan speed ---FAN operation--Stop
Operation---Turn off.
Note:
•This function is only activated in COOLING or DRY mode.
•Before activation the air conditioner, it is recommended to run the air conditioner under cooling operation
for about 30 minutes.
•Pressing the SELF CLEAN or ON/OFF button again during the cleaning cycle will cancel the operation and turn
the unit off.
Clean Air Function (optional)
Improving the quality of indoor air is one of the purposes of an air conditioner. This air conditioner is
equipped with ionizer or Plasma Dust Collector(model dependent). With the anions generated by
Ionizer, the air circulation of the air conditioner fills the room with refreshing, natural and healthy air.
The Plasma Dust Collector generates a high voltage ionization zone, through which the air is converted
to plasma. Inside the air most of the dust, smoke, and pollen particles are captured by the electrostatic
filter.
Anti-Mildew Function (optional)
When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner will continue operating
for about 10 minutes (depending on models) with soft wind.This will help to dry up the condensed
water inside the evaporator, and prevent the mildew growth. Under Anti-mildew operation, do not
restart the air conditioner until the unit is completely off.
Anto-Restart Function (optional)
In event of power interruption such as a blackout, the air conditioner stops once. But it restarts
automatically and performs previous operation when the power supply is resumed.
OPERATING INSTRUCTIONS
Other manuals for Advantage Series
8
Table of contents
Other MrCool Air Conditioner manuals
MrCool
MrCool Advantage Series User manual
MrCool
MrCool Olympus Series User manual
MrCool
MrCool DIY-MULTI2-18HP230C User manual
MrCool
MrCool Advantage 9k User manual
MrCool
MrCool Signature Series Quick start guide
MrCool
MrCool Advantage A-36-HP-230C Repair manual
MrCool
MrCool Signature MCVP Series User manual
MrCool
MrCool Oasis 9k User manual
MrCool
MrCool A-36-HP-230B User manual
MrCool
MrCool DIY Series User manual
MrCool
MrCool DIY Series User manual
MrCool
MrCool O-09-HP-WMAH-230A User manual
MrCool
MrCool Advantage Series User manual
MrCool
MrCool MWUC 5 Series Operating instructions
MrCool
MrCool Olympus Series User manual
MrCool
MrCool PTAC 5 Series Operating instructions
MrCool
MrCool DIY E Star Series Operating instructions
MrCool
MrCool DIY E Star Series Operating instructions
MrCool
MrCool Advantage Series User manual
MrCool
MrCool PRODIRECT Series Quick start guide
Popular Air Conditioner manuals by other brands
Fujitsu
Fujitsu Inverter ASBA30JFC operating manual
Toshiba
Toshiba RAS-M10SMUV-E installation manual
Daikin
Daikin FXLQ20MAVE Operation manual
Hitachi
Hitachi RAS-E24CAK instruction manual
CIAT
CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance
Bestron
Bestron AAC6000 instruction manual
