Moxa Technologies NPort IA5000A Series User manual

P/N: 1802051500318

*1802051500318*

NPort IA5000A Series

Quick Installation Guide

Version 5.3, July 2023

Technical Support Contact Information

www.moxa.com/support



- 2 -

Overview

The NPort IA5000A series of device servers delivers easy and reliable

serial-to-Ethernet connectivity for the industrial automation market.

The servers support several operation modes—TCP Server, TCP Client,

UDP, Real COM, RFC2217, RTelnet, Pair Connection, and Ethernet

Modem—ensuring the compatibility of network software. They are an

ideal choice for connecting RS-232/422/485 serial devices, such as

PLCs, sensors, meters, motors, drives, barcode readers, and operator

displays.

Package Checklist

Before installing the NPort IA5000A Series device servers, verify that

the package contains the following items:

•1 NPort IA5150A/IA5250A/IA5450A Series device server

•Quick installation guide (printed)

•Warranty card

Optional Accessories

•DR-4524: 45W/2A DIN-Rail 24 VDC Power Supply with universal

85 to 264 VAC input

•DR-75-24: 75W/3.2A DIN-Rail 24 VDC Power Supply with

universal 85 to 264 VAC input

•DR-120-24: 120W/5A DIN-Rail 24 VDC Power Supply with 88 to

132 VAC/176 to 264 VAC input by switch

•WK-36-01: Wall-mounting kit

For more optional accessories suitable for additional installation

options, for example, other regional power adapters/supplies or

serial/power cables for different models, please check the datasheet on

the Moxa website for the complete accessory list.

NOTE

Please notify your sales representative if any of the above

items are missing or damaged.

Hardware Introduction

The NPort IA5150A Series has one RS-232 DB9 serial port and one RS-

422/485 terminal block for serial data communication. The NPort

IA5250A/IA5450A Series has two/four RS-232/422/485 3-in-1 DB9

serial ports for serial data communication. Each model has one 8-

contact screw-type terminal block, which is located at the top for power

input and relay output.

- 3 -

Dimensions

The Reset to Default Button—Depress the reset to default button for

5 continuous seconds to load the factory default settings. Use a pointed

object, such as a straightened paper clip or toothpick, to depress the

reset to default button. This will cause the Ready LED to blink on and

off. The factory default settings are loaded once the Ready LED stops

blinking (after about 5 seconds). At this point, you can release the reset

to default button.

- 4 -

NPort IA5000A Series LED Indicators (front panel)

Name

Color

Function

PWR1,

PWR2

Red

Power is being supplied to power input PWR1,

PWR2.

Ready

Red

Steady on: Power is on and the NPort IA5000A

Series is booting up.

Blinking: Indicates an IP conflict, the DHCP or

BOOTP server did not respond properly, or a relay

output occurred.

Green

Steady on: Power is on and the NPort IA5000A

Series is functioning normally.

Blinking: The device server

has been located by the

Administrator’s "Locate" function.

Off

Power is off, or a power error condition exists.

E1, E2

Orange

10 Mbps Ethernet connecting.

Green

100 Mbps Ethernet connecting.

Off

Ethernet cable is disconnected, or has a short.

P1, P2,

P3, P4

Orange

Serial port is receiving data.

Green

Serial port is transmitting data.

Off No data is being transmitted or received through

the serial port.

Hardware Installation Procedure

STEP 1: After removing the NPort IA5000A Series from the box, the

first thing you should do is connect the power adapter. Connect the 12-

48 VDC power line with the NPort IA5000A Series’ terminal block, or

connect the DIN-Rail power supply with the NPort IA5000A Series’

terminal block.

STEP 2: Connect the NPort IA5000A Series to a network. Use a

standard straight-through Ethernet cable to connect to a hub or switch.

When setting up or testing the NPort IA5000A Series, you might find it

convenient to connect directly to your computer’s Ethernet port. In this

case, use a crossover Ethernet cable.

STEP 3: Connect the NPort IA5000A Series’ serial port to a serial

device.

STEP 4: The NPort IA5000A Series is designed to be attached to a DIN-

rail or mounted on a wall. For DIN-rail mounting, push down the spring

and properly attach it to the DIN-rail until it “snaps” into place. For wall

mounting, install the wall-mount kit (optional) first, and then screw the

device onto the wall.

- 5 -

The following figure illustrates the two mounting options:

Grounding the NPort IA5000A Series

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from

the ground screw to the grounding surface before connecting the

devices.

ATTENTION

This product is intended to be mounted to a well-grounded

mounting surface such as a metal panel.

A 4 mm2

conductor must be used when a connection to the

external grounding screw is used.

Software Installation Information

For the NPort’s configuration, the default IP address of the NPort is:

192.168.127.254. You may log in with the account name admin and

password moxa to change any setting to meet your network topology

(e.g., IP address) or serial device (e.g., serial parameters).

For software installation, download the relative utilities from Moxa's

website

https://www.moxa.com/support/support_home.aspx?isSearchShow=1

•Download the NPort Windows Driver Manager and install it as the

driver to run with Real COM mode of the NPort Series.

•Execute NPort Windows Driver Manager; then map the virtual COM

ports on your Windows platform.

•You may refer to the DB9 Male pin assignment section to loop back

pin 2 and pin 3 for the RS-232 interface to carry out a self-test on

the device.

•Use HyperTerminal or a similar program (you can download Moxa's

program, called PComm Lite) to test whether the device is good or

not.

- 6 -

Pin Assignments and Cable Wiring

RS-232/422/485 (Male DB9) Pinouts

PIN RS-232

RS-422/

RS-485 (4W)

RS-485

(2W)

DCD

TxD-(A)

–

RXD

TxD+(B)

–

TXD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

RS-422/2W RS-485/4W RS-485 (Terminal Block) Pinouts

RS-485

(2W)

RS-422/

RS-485 (4W)

–

TxD+(B)

–

TxD-(A)

Data+(B)

RxD+(B)

Data-(A)

RxD-(A)

GND

The terminal block must be used with a 28 to 12 AWG (torque value 4.5

lb-in) cable with the devices.

Four cables are available as optional accessories that can be used to

connect the NPort IA5000A Series to RS-232 serial devices. For your

convenience, we show precise cable wiring diagrams for each of the two

cables.

Female DB9 to Male DB9

- 7 -

Female DB9 to Male DB25

ATEX and IECEx Information

1. Certification number: DEMKO 12 ATEX 1014487X

IEC Certification Number: IECEx UL 13.0024X

2. Ambient Temperature Range:

-40°C ≤ Tamb ≤ 75°C for models with the “-T” suffix

0°C ≤ Tamb ≤ 60°C for models without the “-T” suffix

3. Certification String: Ex ec nC IIC T3 Gc

4. Standards Covered:

IEC 60079-0, Edition 7

IEC 60079-7, Edition 5.1

IEC 60079-15, Edition 5

EN IEC 60079-0: 2018

EN IEC 60079-7: 2015 + A1: 2018

EN IEC 60079-15: 2019

5. The conditions of safe usage:

•The equipment must be installed in an enclosure that provides

a minimum ingress protection of IP54 in accordance with

IEC/EN 60079-0.

•The equipment must only be used in an area of at least

pollution degree 2, as defined in IEC/EN 60664-1.

6. Rated Cable Temp ≥91°C.

- 8 -

Pull-high, Pull-low, and Terminator for RS-485

Remove the NPort IA5000A’s top cover, and you will find DIP switches

to adjust each serial port’s pull-high, pull-low, and terminator.

NPort IA5150A Series

NPort IA5250A Series

Pull-high

resistor

Pull-low

resistor

Terminator

1 kΩ

120 Ω

OFF

150 kΩ*

–*

*Default

Model

Power Input

NPort IA5150A Series

12 to 48 VDC, max. 512 mA, Class 2

NPort IA5250A Series

NPort IA5450A Series

Relay Output

24 VDC, 1 A, resistance

Maximum Surrounding Air

Temperature

75°C

Other manuals for NPort IA5000A Series

Table of contents

Other Moxa Technologies Server manuals

Moxa Technologies

Moxa Technologies NPort 6150 Series User manual

Moxa Technologies

Moxa Technologies NPort IA5150A User manual

Moxa Technologies

Moxa Technologies CN2610 series User manual

Moxa Technologies

Moxa Technologies NPort 6150 Series User manual

Moxa Technologies

Moxa Technologies NPort 6150 Series User manual

Moxa Technologies

Moxa Technologies ioLogik E1510-T User manual

Moxa Technologies

Moxa Technologies NPort 6450 Series User manual

Moxa Technologies

Moxa Technologies NPort 5250AI-M12 User manual

Moxa Technologies

Moxa Technologies NPort 6450 Series User manual

Moxa Technologies

Moxa Technologies NPort 5600 Series User manual

Moxa Technologies

Moxa Technologies NPort IA5150 series User manual

Moxa Technologies

Moxa Technologies NPort DE-311 User manual

Moxa Technologies

Moxa Technologies VPort 2110 User manual

Moxa Technologies

Moxa Technologies nport 5400 series User manual

Moxa Technologies

Moxa Technologies ioLogik 4000 Series User manual

Moxa Technologies

Moxa Technologies NPort 6000 Series User manual

Moxa Technologies

Moxa Technologies NPort Server Lite DE-302 Manual

Moxa Technologies

Moxa Technologies NPort S8000 Series User manual

Moxa Technologies

Moxa Technologies ioLogik E1210 User manual

Moxa Technologies

Moxa Technologies NPort 5600-8-DT User manual

Moxa Technologies

Moxa Technologies NPort 6250 Series User manual

Moxa Technologies

Moxa Technologies CN2510 Series User manual

Moxa Technologies

Moxa Technologies NPort 5100 Series User manual

Moxa Technologies

Moxa Technologies NPort 5600-8-DTL Series User manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started