Moxa Technologies NPort 5200A Series User manual

— 1— — 2 — — 3 —

NPort 5200A Series

Quick Installation Guide

First Edition, July 2010

1. Overview

NPort 5200A series device servers are compact, palm-sized data

communication devices that allow you to control RS-232 (NPort 5210A),

RS-422/485 (NPort 5230A), and RS-232/422/485 (NPort 5250A) serial

devices over a TCP/IP-based Ethernet.

Note: “-T” indicates an extended temperature model.

2. Package Checklist

Before installing the NPort 5200A series device server, verify that the

package contains the following items:

1 NPort 5200A serial device server

4 stick-on pads

Document & Software CD

Quick Installation Guide

Product Warranty Statement

Optional Accessory

DK-35A: DIN-Rail Mounting Kit (35 mm)

Notify your sales representative if any of the above items are missing or

damaged.

3. Hardware Introduction

As shown in the following figures, NPort 5200A series device servers

have two male DB9 ports for transmitting RS-232 (NPort 5210A), or

RS-232/422/485 (NPort 5250A) serial data and have two 5-pin terminal

block ports for transmitting RS-422/485 (NPort 5230A).

Reset Button—Press and hold the Reset button for 5 seconds to load

factory defaults: Use a pointed object, such as a straightened paper clip or

toothpick, to depress the reset button. This will cause the Ready LED to

blink on and off. The factory defaults will be loaded once the Ready LED

stops blinking (after about 5 seconds).At this point, release the reset

button.

LED Indicators—NPort 5200A’s top panel has four LED indicators,

which are described in the following table.

LED

Name

LED

Color LED Function

Ready

Red

Steady on:

Power is on and the NPort is booting up.

Blinking:

Indicates an IP conflict, or DHCP or

BOOTP server is not responding properly.

Green

Steady on:

Power is on and the NPort is functioning

normally.

Blinking:

The NPort has been located by the NPort

Administrator’s Location function.

Off

Power is off, or a power error..

Link

Orange

10 Mbps Ethernet connection.

Green

100 Mbps Ethernet connection.

Off

Ethernet cable is disconnected.

P1, P2

Orange

Serial port is receiving data.

Green Serial port is transmitting data.

Off

No data is being transmitted or received through the

serial port.

Adjustable pull high/low resistor and terminator for RS-422/485

Remove the NPort 5230A/5250A’s top

cover and you will find DIP switches to

adjust each serial port’s pull

-high, pull-low,

and terminator.

Do not use the 1 KΩ setting

with RS

-232 mode, as doing so will

degrade the RS

232 signals and shorten the

communication

s range.

Pull-high resistor

Terminator

1 KΩ

120Ω

OFF

*150 K

*---

*Default

P/N:

1802052000010

—4— —5 — — 6 —

4. Hardware Installation Information

STEP1:After removing the NPort 5200Aseries device server from the

box, connect the NPort 5200A series device server to a network. Use a

standard straight-through Ethernet cable to connect to a hub or switch.

When setting up or testing the NPort 5200Aseries device server, you

might find it convenient to connect directly to your computer’s Ethernet

port. In this case, use a cross-over Ethernet cable.

STEP2: Connect the NPort 5200A series device server’s serial port to a

serial device.

STEP3: Connect the power adaptor.

STEP 4: Placement options.

In addition to placing the NPort 5200A on a desktop or other horizontal

surface, you may also make use of the DIN-Rail or Wall Mount options,

as illustrated below.

5. Software Installation Information

To install NPort Administration Suite, insert the NPort Document &

Software CD into your computer’s CD-ROM drive. Once the NPort

Installation CD window opens, click on the Software folder, and then

follow the instructions on the screen.

To view detailed information about NPort Administration Suite, click

on the Documents folder, and then select “NPort 5200A Series User’s

Manual” to open the pdf version of the user’s guide.

6. Pin Assignments

Ethernet Port Pinouts

Pin Number

Ethernet

Tx+

Tx-

Rx+

Rx-

NPort 5210A—DB9 male (RS-232) port pinouts

Pin Number

RS-232

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

---

NPort 5230A—Terminal Block (RS-422/485) port pinouts

Number

RS-422/485

(4W)

RS-485

(2W)

TxD+(B)

---

TxD-(A)

---

RxD+(B)

Data+(B)

RxD-(A)

Data-(A)

GND

NPort 5250A—DB9 male (RS-232/422/485) port pinouts

Number RS-232 RS-422/

485 (4W) RS-485

(2W)

DCD TxD-(A) ---

RxD TxD+(B) ---

TxD RxD+(B) Data+(B)

DTR RxD-(A) Data-(A)

GND GND GND

DSR --- ---

RTS --- ---

CTS --- ---

--- --- ---

7. Specifications

Power Requirements

Power Input

12 to 48 VDC

Power Consumption

119 mA@12V, 65 mA@24V

Operating Temperature

0 to 60°C (32 to 140°F), for standard models

-40 to 75°C (-40 to 167°F), for -T models

Operating Humidity

5 to 95% RH

Dimensions

100 x 111 x 26 mm

(3.94 x 4.37 x 1.02 in)

with ears

77 x 111 x 26 mm

(3.03 x 4.37 x 1.02 in)

without ears

Serial Line Protection

15 KV ESD for serial port

Level 1 Surge, EN61000-4-5

Magnetic Isolation

1.5 KV for Ethernet

Power Line Protection

Level 2 Burst (EFT), EN61000-4-4

Level 3 Surge, EN61000-4-5

Regulatory Approvals

FCC Class A, CE Class A, UL, LVD

Click here for online support:

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

Reproduction without permission is prohibited.

Other manuals for NPort 5200A Series

This manual suits for next models

Other Moxa Technologies Server manuals

Moxa Technologies

Moxa Technologies VPort 2110 User manual

Moxa Technologies

Moxa Technologies NPort 6450 Series User manual

Moxa Technologies

Moxa Technologies NPort 6450 Series User manual

Moxa Technologies

Moxa Technologies NPort 5000AI-M12 User manual

Moxa Technologies

Moxa Technologies NPort 6250 Series User manual

Moxa Technologies

Moxa Technologies 2140 User manual

Moxa Technologies

Moxa Technologies NPort 5200 Series User manual

Moxa Technologies

Moxa Technologies VPort 2110 User manual

Moxa Technologies

Moxa Technologies NPort IA5000A-I/O series User manual

Moxa Technologies

Moxa Technologies NPort W2150A User manual

Moxa Technologies

Moxa Technologies NPort IA-5150-M-SC User manual

Moxa Technologies

Moxa Technologies NPORT 6600 series User manual

Moxa Technologies

Moxa Technologies NPort 5110 Series User manual

Moxa Technologies

Moxa Technologies ioLogik E1200 Series User manual

Moxa Technologies

Moxa Technologies VPort 2310 User manual

Moxa Technologies

Moxa Technologies NPort 5610-8 User manual

Moxa Technologies

Moxa Technologies MiiNePort E1-SDK User manual

Moxa Technologies

Moxa Technologies NPort 5600-8-DT User manual

Moxa Technologies

Moxa Technologies 5600 User manual

Moxa Technologies

Moxa Technologies NPort IA5150A User manual

Moxa Technologies

Moxa Technologies CN2610 series User manual

Moxa Technologies

Moxa Technologies NPort 5610-8-DT User manual

Moxa Technologies

Moxa Technologies NPort 6150 Series User manual

Moxa Technologies

Moxa Technologies 5400 User manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started