Moxa Technologies NPort 5200 Series User manual

P/N: 1802052000312

*1802052000312*

NPort 5200 Series

Quick Installation Guide

Edition 7.0, November 2015

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The NPort 5200 compact palm-sized device servers are used to control

RS-232 (NPort 5210/5230/5210-T/5230-T) or RS-422/485 (NPort

5230/5232/5232I/5230-T/5232-T/5232I-T) serial devices over a

TCP/IP-based Ethernet.

NOTE

“-T” indicates an extended operating temperature model.

Package Checklist

Before installing your NPort 5200, verify that the package contains the

following items:

•1 NPort 5200 2-port Serial Device Server

•Documentation & Software CD

•NPort 5200 Series Quick Installation Guide

Optional Accessories

•DK-35A: DIN-Rail Mounting Kit (35 mm)

•CBL-RJ45M9-150: RJ45 (8-pin) to DB9 (M) cable, 150 cm

•CBL-RJ45F9-150: RJ45 (8-pin) to DB9 (F) cable, 150 cm

•CBL-RJ45M25-150: RJ45 (8-pin) to DB25 (M) cable, 150 cm

•CBL-RJ45F25-150: RJ45 (8-pin) to DB25 (F) cable, 150 cm

•DIN-Rail Power Supply and Adapter

Note: Notify your sales representative if any of the above items are

missing or damaged.

Hardware Introduction

The NPort 5200 device servers are used to control RS-232/422/485

devices. The NPort 5210/5210-T has two 8-pin RJ45 ports, both for the

RS-232 interface. The NPort 5230/5230-T has one 10-pin terminal block,

with 5 pins used for one RS-232 port, and 5 pins used for one RS-422/485

port. The NPort 5232/5232I/5232-T/5232I-T have one 10-pin terminal

block, with 5 pins used for one RS-422/485 port, and 5 pins used for

another RS-422/485 port.

- 3 -

Reset Button—Press the Reset button continuously for 5 sec to load

factory defaults: Use a pointed object, such as a straightened paper clip

or toothpick, to press the reset button. This will cause the Ready LED to

blink on and off. The factory defaults will be loaded once the Ready LED

stops blinking (after about 5 seconds). At this point, you should release

the reset button.

NPort 5200 LED Indicators (top panel)

LED Name

LED Color

LED Function

Ready

Red

Steady on:

Power is on and the NPort 5200 is

booting up.

Blinking:

Indicates an IP conflict, or DHCP or

BOOTP server did not respond

properly.

Green

Steady on:

Power is on and the NPort 5200 is

functioning normally.

Blinking:

The device server has been located

by Administrator’s Location function

Off

Power is off, or power error condition exists.

Ethernet

Orange

10 Mbps Ethernet connection.

Green

100 Mbps Ethernet connection.

Off

Ethernet cable is disconnected, or has a short.

P1, P2

Orange

Serial port is receiving data.

Green

Serial port is transmitting data.

Off

No data is being transmitted or received through

the serial port.

- 4 -

Hardware Installation Procedure

STEP 1: After removing the NPort 5200 from the box, the first thing you

should do is connect the power adapter. Connect the 12-30 VDC power

line with the NPort 5200’s terminal block, or connect the DIN-rail power

supply with the NPort 5200’s terminal block.

STEP 2: Connect the NPort 5200 to a network. Use a standard

straight-through Ethernet cable to connect to a hub or switch. When

setting up or testing the NPort 5200, you might find it convenient to

connect directly to your computer’s Ethernet port. In this case, use a

cross-over Ethernet cable.

STEP 3: Connect the NP ort 5200’s serial port to a serial device.

STEP 4: Placement Options

In addition to placing the

NPort 5200 on a desktop or

other horizontal surface,

you may also make use of

the DIN

-rail or wall mount

options, as illustrated here.

Wall Mount

DIN-Rail

Software Installation Information

To install NPort Administration Suite, insert the NPort Document &

Software CD into your computer’s CD-ROM drive. Once the NPort

Installation CD window opens, click on the Installation button, and then

follow the instructions on the screen. To view detailed information about

NPort 5200 Administration Suite, click on the Documents button,

and then select “NPort 5200 Series User’s Guide” to open the pdf version

of this user’s guide. The PComm Lite program is also included in the

Documentation & Software CD free of charge. Install PComm Lite to

use the Serial Consolefor configuring the IP address for the first time.

Pin Assignments and Cable Wiring—

NPort 5230/5230-T

Terminal Block Wiring

- 5 -

NOTE

The NPort 5232/5232I/5232-T/5232I-T have 2 RS-422/485

ports. The pin assignments are the same as the NPort

5230/5230

-T’s port 2. Refer to the “NPort 5200 Series User’s

Manual” for more details.

Pin Assignments and Cable Wiring—

NPort 5210/5210-T

RJ45 (8-pin) Connector Pinouts

8-Pin

Signal

DSR

RTS

GND

TxD

RxD

DCD

CTS

DTR

Cable Wiring (RS-232)

Four cables are available as optional accessories to connect the NPort

5210/5210-T to RS-232 serial devices. For your convenience, we show

precise cable wiring diagrams for each of the four cables.

RJ45 (8-pin) to DB25 Female (Cable Name: CBL-RJ45F25-150)

RJ45 (8-pin) to DB25 Male (Cable Name: CBL-RJ45M25-150)

- 6 -

RJ45 (8-pin) to DB9 Female (Cable Name: CBL-RJ45F9-150)

RJ45 (8-pin) to DB9 Male (Cable Name: CBL-RJ45M9-150)

Specifications

Power Requirements

NPort 5210/5210-T: 12 to 48 VDC, 325 mA at 12V (max.)

NPort 5230/5230-T: 12 to 48 VDC, 325 mA at 12V (max.)

NPort 5232/5232-T: 12 to 48 VDC, 280 mA at 12V (max.)

NPort 5232I/5232I-T: 12 to 48 VDC, 365 mA at 12V (max.)

Operating Temp.

Standard models: 0 to 55°C (32 to 131°F)

T models: -40 to 75°C (-40 to 167°F)

Operating humidity: 5 to 95% RH

Dimensions

NPort 5210/5230/5232/5210-T/5230-T/5232-T (including ears):

90 × 100.4 × 22 mm (3.54 × 3.95 × 0.87 in)

NPort 5210/5230/5232/5210-T/5230-T/5232-T (without ears):

67 × 100.4 × 22 mm (2.64 × 3.95 × 0.87 in)

NPort 5232I/5232I-T (including ears):

90 × 100.4 × 35 mm (3.54 × 3.95 ×1.37 in)

NPort 5232I/5232I-T (without ears):

67 × 100.4 × 35 mm (2.64 × 3.95 × 1.37 in)

- 7 -

Regulatory Approvals

EMI

EN55022 Class A, FCC part 15 Subpart B Class A

EMS

EN 61000-4-2 ESD: contact 4 kV; air 8 kV

EN 61000-4-3 RS: 3 V/m (80MHz to 1 GHz)

EN 61000-4-4 EFT: Power 1 kV; Signal 0.5 kV

EN 61000-4-5 Surge: AC 1 kV

EN 61000-4-6 CS: 3 V

EN 61000-4-8

EN 61000-4-11

Safety

UL 60950-1, EN 60950-1

EMC

55022/24

Marine

DNV

Medical

(NPort 5210 only) EN 60601-1-2 Class B, EN55011

Other manuals for NPort 5200 Series

Table of contents

Other Moxa Technologies Server manuals

Moxa Technologies

Moxa Technologies NPort 6150 Series User manual

Moxa Technologies

Moxa Technologies NPort 6450 Series User manual

Moxa Technologies

Moxa Technologies NPort 5200 Series User manual

Moxa Technologies

Moxa Technologies NPort 5410 User manual

Moxa Technologies

Moxa Technologies NPort IA5150AI User manual

Moxa Technologies

Moxa Technologies NPort 6450 Series User manual

Moxa Technologies

Moxa Technologies ioLogik 4000 Series User manual

Moxa Technologies

Moxa Technologies NPort 5100 Series User manual

Moxa Technologies

Moxa Technologies NPort IA5450A User manual

Moxa Technologies

Moxa Technologies NPort P5150A-DB9 User manual

Moxa Technologies

Moxa Technologies NPort IA5150 series User manual

Moxa Technologies

Moxa Technologies NPort Server Lite DE-302 Manual

Moxa Technologies

Moxa Technologies NPort 6450 Series User manual

Moxa Technologies

Moxa Technologies NPort 5600 Series User manual

Moxa Technologies

Moxa Technologies VPort 2110 User manual

Moxa Technologies

Moxa Technologies NPort 5100 Series User manual

Moxa Technologies

Moxa Technologies MiiNePort E1-SDK User manual

Moxa Technologies

Moxa Technologies NPort W2150A-T User manual

Moxa Technologies

Moxa Technologies CN2610 series User manual

Moxa Technologies

Moxa Technologies CN2510-16 User manual

Moxa Technologies

Moxa Technologies NPort 5150AI-M12 User manual

Moxa Technologies

Moxa Technologies NPort 6150 Series User manual

Moxa Technologies

Moxa Technologies NPort W2250 User manual

Moxa Technologies

Moxa Technologies NPort Express DE-211 User manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started