Moxa Technologies NPort 5000AI-M12 User manual

P/N: 1802051503011

*1802051503011*

NPort 5000AI-M12

Quick Installation Guide

Edition 3.1, November 2018

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

NPort 5000AI-M12 device servers are designed to make serial devices

instantly network-ready. They are compliant with EN 50155/EN 50121-

4, making them suitable for rolling stock and wayside applications that

are usually subject to high levels of vibration. Use Moxa’s NPort

5000AI-M12 device servers to give your PC software direct access to

serial devices from anywhere on a network.

Package Checklist

Before installing an NPort 5000AI-M12 series device server, verify that

the package contains the following items:

•1 NPort 5000AI-M12 series device server

•Quick installation guide (printed)

•Warranty Card

Optional Accessories

•DR-45-24: 45W/2A DIN-rail 24 VDC power supply with universal 85

to 264 VAC input

•DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with universal

85 to 264 VAC input

•DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to 132

VAC/176 to 264 VAC input

•DK-TN-5308: DIN-rail kit

Note: Notify your sales representative if any of the above items are

missing or damaged.

Hardware Introduction

The NPort 5150AI-M12 series has a 3-in-1 (RS-232/422/485) DB9

serial port for serial data communication, the NPort 5250AI-M12 series

has two 3-in-1 (RS-232/422/485) DB9 serial ports for serial data

communication, and the NPort 5450AI-M12 has four 3-in-1 (RS-

232/422/485) DB9 serial ports for serial data communication.

- 3 -

NPort 5150AI-M12 Appearance

NPort 5250AI-M12 Appearance

- 4 -

NPort 5450AI-M12 Appearance

The Reset to Default Button—Press the reset button to default

button for five seconds continuously to load the factory default settings.

Use a pointed object, such as a straightened paper clip or toothpick, to

press the reset button to default button. This will cause the Ready LED

to blink on and off. The factory default settings are loaded once the

Ready LED stops blinking (after about five seconds). At this point, you

can release the reset button to default button.

NPort 5000AI-M12 LED Indicators (front panel)

Name

Color

Function

PWR

green

Power is being supplied to the power input.

Ready

red

Steady on:

Power is on, and NPort is booting up.

Blinking:

Indicates an IP conflict, or the

DHCP/BOOTP server did not respond

properly.

green

Steady on: Power is on, and NPort is functioning

normally.

Blinking:

The NPort has been located by NPort

Administrator’s Location function.

off

Power is off, or a power error condition exists.

10M,

100M

orange

10 Mbps Ethernet connection.

green

100 Mbps Ethernet connection.

off

Ethernet cable is disconnected.

P1, P2,

P3, P4

orange

Serial port is receiving data.

green

Serial port is transmitting data.

off

No data is being transmitted or received through the

serial port.

- 5 -

Hardware Installation Procedure

Panel/Wall Mounting

Mounting the NPort 5000AI-M12 on the wall requires three screws.

Please use the three screws provided in the product package.

STEP 1: Use the device to mark the positions of the three screw holes

on the wall, as shown in the mounting dimensions diagram.

STEP 2: Use one screw to go through the top-middle screw hole on the

device server and screw it into the wall.

STEP 3: Screw in the remaining two screws through the bottom-left

and bottom-right holes on the device server to the wall.

NOTE

Please use the screws (M3 x 40 mm) included.

DIN-Rail Mounting (optional)

You may use the optional DIN-rail mounting kit (DK-TN-5308; must be

purchased separately) to mount the NPort 5000AI-M12 on a 35 mm

DIN rail.

STEP 1: Fix the DIN-rail attachment plate onto the rear panel of the

device server as shown in the figure below.

- 6 -

STEP 2: Position the NPort 5000AI-M12 on the DIN rail and tilt it to

hook the clamps over the top edge of the rail.

STEP 3: Swing the device server down onto the DIN rail until both

clamps latch on completely.

- 7 -

Software Installation Information

For the NPort’s configuration, the default IP address of the NPort is:

LAN: Static IP = 192.168.127.254; netmask = 255.255.255.0

You may log in with the password moxa to change any settings to

meet your network topology (e.g., IP address) or serial device (e.g.,

serial parameters). If you would like to apply the Real COM mode to

your application, you will need to install the NPort’s driver on your

desktop. You may also refer to Moxa’s support website

https://www.moxa.com/support for the user’s manual, driver, SNMP

MIB, and NPort Search Utility.

NOTE

For the NPort with DB Male serial ports, you may refer to the

DB9 Male Ports

pin assignment section to loop back pin 2 and

pin 3 for the RS-232 interface.

Pin Assignments and Cable Wiring

Ethernet M12 D-coded 4-pin female connector:

Housing: shield

Power M12 5-pin male connector:

Description

Input V+

Not assigned

Input V-

Not assigned

Functional ground

RS-232/422/485 (Male DB9) Pinouts

PIN RS-232

RS-422/

RS-485 (4W)

RS-485 (2W)

DCD

TxD-(A)

–

RXD

TxD+(B)

–

TXD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

Four cables are available as optional accessories that can be used to

connect the NPort 5000AI-M12 series to RS-232 serial devices. The pin

assignments for both connector types are shown below.

- 8 -

Female DB9 to Male DB9

Specifications

Physical Characteristics

Housing

Metal, IP40 protection

Dimensions

80 x 216.6 x 52.9 mm (3.14 x 8.53 x 2.08 in)

Environmental Limits

Operating Temperature

•Standard Models:

-25 to 55°C (32 to 140°F)

•Wide Temperature Models:

-40 to 75°C (-40 to 167°F)

Operating Humidity

5 to 95% RH

Storage Temperature

-40 to 85°C (-40 to 185°F)

Conformal coating

Available on –CT models

Power Input (Need to modularize)

Input Voltage

12/24/36/48 VDC (8.4 to 60 VDC)

Power Consumption

NPort 5150AI-M12: 310 mA @12V

NPort 5150AI-M12-CT: 310 mA @12V

NPort 5150AI-M12-T: 310 mA @12V

NPort 5250AI-M12: 360 mA @12V

NPort 5250AI-M12-CT: 360 mA @12V

NPort 5250AI-M12-T: 360 mA @12V

NPort 5450AI-M12: 440 mA @12V

NPort 5450AI-M12-CT: 440 mA @12V

NPort 5450AI-M12-T: 440 mA @12V

Connector

M12 5-pin male connector

Power Line Protection

Meets EN 50155 certification

Regulatory Approvals

EMC

CE (EN 55032 Class A, EN 55024) (EMI),

FCC Part 15 Subpart B Class A (EMS)

Safety

UL (UL60950-1)

Rail Traffic

EN 50155*, EN 50121-4

*Complies with a portion of EN 50155 specifications. Please contact

Moxa or a Moxa distributor for details.

Shock

IEC 61373

Vibration

IEC 61373

Freefall

IEC 60068-2-32

Reliability

Alert Tools

Built-in buzzer and RTC

- 9 -

Automatic Reboot

Trigger

Built-in WDT (watchdog timer)

MTBF (mean time

between failures)

NPort 5150AI-M12: 789,341 hrs.

NPort 5250AI-M12: 639,622 hrs.

NPort 5450AI-M12: 467,777 hrs.

Warranty

Warranty Period

5 years

Details

See www.moxa.com/warranty

For railway rolling stock applications, the device must use a galvanically

isolated power supply that is compliant with the EN 50155 standard.

Other manuals for NPort 5000AI-M12

This manual suits for next models

Table of contents

Other Moxa Technologies Server manuals

Moxa Technologies

Moxa Technologies NPort 5600-8-DT User manual

Moxa Technologies

Moxa Technologies NPort IA5000A-I/O series User manual

Moxa Technologies

Moxa Technologies NPort IAW5000A- I/O User manual

Moxa Technologies

Moxa Technologies VPort 2110 User manual

Moxa Technologies

Moxa Technologies NPort 5610-8-DT User manual

Moxa Technologies

Moxa Technologies VPort 2310 User manual

Moxa Technologies

Moxa Technologies CN2500 User manual

Moxa Technologies

Moxa Technologies ioLogik E1210 User manual

Moxa Technologies

Moxa Technologies ioLogik W5300 Series User manual

Moxa Technologies

Moxa Technologies NPort 5150AI-M12 User manual

Moxa Technologies

Moxa Technologies NPort 5200 Series User manual

Moxa Technologies

Moxa Technologies NPort IA5150 series User manual

Moxa Technologies

Moxa Technologies NPort 5610 series User manual

Moxa Technologies

Moxa Technologies ioLogik R2140 User manual

Moxa Technologies

Moxa Technologies NPort Express DE-211 Manual

Moxa Technologies

Moxa Technologies NPort 5210A User manual

Moxa Technologies

Moxa Technologies ioLogik R2110 Series User manual

Moxa Technologies

Moxa Technologies NPort 5600 Series User manual

Moxa Technologies

Moxa Technologies NPort W2004 Series User manual

Moxa Technologies

Moxa Technologies NPort 5610-8 User manual

Moxa Technologies

Moxa Technologies AirWorks AWK-1127 User manual

Moxa Technologies

Moxa Technologies NPort W2150A-T User manual

Moxa Technologies

Moxa Technologies NPort W2150A-W4 Series User manual

Moxa Technologies

Moxa Technologies NPort Server Lite DE-302 Manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started