Motic BA310 Pol User manual
WWW.MOTIC.COM
MOTIC INCORPORATION LTD.
BA310/BA400/BA410
Multi Viewing System
Instruction Manual
MVH - 2 Two observers (Side Side)
MVH - 3 Three observers (Side Side)
MVH - 5 Five observers (Side Side for BA400/BA410)
MVH - 2 Two observers (Face Face)
1
To ensure correct usage, read this manual and the instruction manual specific
to the microscope being utilized.
We are constantly endeavouring to improve our instruments and to adapt them to the
requirements of modern research techniques and testing methods. This involves
modification to the mechanical structure and optical design of our instruments.
Therefore, all descriptions and illustrations in this instruction manual, including all
specifications are subject to change without notice.
2
Table of Contents
I. Nomenclature 3
II. Assembly 7
MVH – 2 Two observers (SideSide) 7
MVH – 3 Three observers (SideSide) 10
MVH – 5 Five observers (SideSide) 12
MVH – 2 Two observers (FaceFace) 14
III. Observation 17
IV. Troubleshooting 18
3
I. Nomenclature
For MVH-2 (SideSide)
4
MVH-2 (FaceFace)
5
6
7
II. Assembly
Assembly for MVH–2 Two observers (SideSide)
The following drawing illustrates the configuration of the viewing attachment.
▲▲Convey the image orientation of each field of view.
This viewing head configuration does not allow the attachment of additional
intermediate parts.
Tools Needed: Allen Hex Wrench provided with the Viewing Head.
Steps in Assembly Process:
Step 1. Main Observation Head
Step 2. Sub-Observation Head
Step 3. Support Stand
Step 4. Eyepiece Tube Sub-Observation Head
Step 5. Eyepiece Tube Main Observation Head
Step 6. Input Plug for the Arrow Illuminator
Step 7. AC Adapter
8
Step 1. Main Observation Head
Install the main observation head with the arrow control knob facing the main user.
Fasten with the clamp screw located on the right hand side of the microscope arm.
Step 2. Sub-Observation Head
Slot in the relay lens unit (with sub-observation head attached) into the relay lens opening
on the main head. Secure with the relay lens unit clamping ring.
The relay lens unit can be slot in either side of the main observation head
9
Step 3. Support Stand
Adjust the height of the support stand to ensure the main head and the sub-
observation head are horizontal when attached.
Release the height adjustment clamp knob, and let the centre rod float up with the aid
of the built-in spring.
Adjust the height of the centre rod to bring the spherical surface of the rod in
coincidence with the spherical base of the sub-observation head.
Tighten the height adjustment clamp knob while maintaining the horizontal
alignment of the sub-observation head.
Tighten the support stand clamp ring to the spherical base of sub-observation head
Step 4. Binocular Tube Sub-Observation Head
Mount the Binocular tube on the sub-observation head and fasten in position using the
eyepiece clamp screw.
Step 5. Trinocular / Binocular Tube Main Observation Head
Mount the Trinocular / Binocular tube on the Main observation head and fasten it in
position, using eyepiece clamp screw.
Step 6. Input Plug for the Arrow Illuminator
Step 7. AC Adapter
Connect the AC adapter output jack plug to input jack socket on the left side of the
main observation head
Plug AC adapter into the power source receptacle
Other manuals for BA310 Pol
2
This manual suits for next models
2
Table of contents
Other Motic Microscope manuals
Motic
Motic BA210E User manual
Motic
Motic PA43 User manual
Motic
Motic SILVER150 Series User manual
Motic
Motic AE2000 BIN User manual
Motic
Motic B1-211 User manual
Motic
Motic ST-30 Series User manual
Motic
Motic Moticam S2 User manual
Motic
Motic SMZ-161B User manual
Motic
Motic B1 Series User manual
Motic
Motic M3600 Series User manual
Motic
Motic BA310 Pol User manual
Motic
Motic AE20 User manual
Motic
Motic BA310E User manual
Motic
Motic DM-143-FBGG Series User manual
Motic
Motic SWIFTLINE MAE-31R User manual
Motic
Motic AE2000 Ergo User manual
Motic
Motic SWIFTLINE SM100 Series User manual
Motic
Motic BA310Met-H User manual
Motic
Motic Moticam X User manual
Motic
Motic BA210S User manual
