This manual is the property of Monti Antonio S.p.A. Any reproduction, even if only partial, is severely prohibited
MI9013610
10
- operatives are the people who use the machines. Their job is confined to the correct
positioning of material and to control operations and regulations. These people must
fully understand all of the instructions and the method of operation of the machine as
outlined in this manual. It is completely forbidden for any of these employees to carry
out any operations different from those included in Chapter 5-6.
The operative must be fully aware of the workings of the machine and its
controls, he/she must have read and understood all the information contained in
this manual and must be aware of the residual risks.
It is the employer’s responsibility to accurately inform all operators of the risks of accident, of
the individual protection devices available and of the general anti-accident regulations laid
down by international or national law. All operators are required to respect the anti-accident
regulations of the destination country for the machine in order to prevent possible accidents.
You are reminded that the European Community has issued some directives with regard to
the health and safety of workers, including the following directives which every employer is
required to adhere to: 89/391/CEE, 89/686/CEE, 89/655/CEE, 89/656/CEE, 86/188/CEE,
86/58/CEE and 77/576/CEE.
Tampering with the machine or substituting parts of the machine not expressly authorised
by MONTI Antonio is strictly forbidden.
Usage of the machine which does not conform to that set out in paragraph 3.1 relieves Monti
Antonio from any liability for damage to people or things.
The use of accessories, tools, consumer materials, or spare parts different from those
recommended by the manufacturer and/or laid out in this manual constitutes a danger for the
operators and/or damage to the machine.
Any modification to the machine not expressly authorised by MONTI Antonio relieves
MONTI Antonio from any civil or criminal liability
.
It is strictly forbidden to remove or tamper with any safety device.
Any ordinary or exceptional maintenance operation to the machine must take place
without electrical or air supply.
Do not put your hands in or insert any screwdrivers, keys or other type of tool in to
the moving parts.
The operator’s work space must be kept clean and tidy and clear of any objects that can
obstruct freedom of movement.
Operators must avoid unsafe operations or uncomfortable positions that can compromise
their freedom to work or their balance.
The work space must be adequately lit for the intended operations. Insufficient or excessive
lighting can carry risks.
THE INSTRUCTIONS, ACCIDENT-PREVENTION REGULATIONS AND THE
WARNINGS CONTAINED IN THIS MANUAL MUST ALWAYS BE ADHERED TO.
