Monoprice MS-03 User manual
MS
NOTE: Read entire instruction sheet before you start installtion and assembly.
WARNING
• Do not begin to installation of the product on you have read and understand the
instructions and warnings contained in this Installation Sheet. If you have any question
regarding any of the instruction or warning, Please contact your local distributor.
• Make sure that the supporting surface will safely support the combined load of the
equipment and all attached hardware and components.
• Never exceed the Maximum Load Capacity.
• Always use an assistant or mechanical lifting equipment to safely lift and position
equipment.
• Tighten screws firmly, but do not over tighten. Over tightening can damage the items,
greatly reducing their holding power.
• This products intended for indoor use only. Use of this product outdoors could lead to
product failure and personal injury.
1
Component Checklist
IMPORTANT: Ensure you have received all parts against the component checklist prior to installing. If any parts
are missing or faulty, telephone the special franchiser for a placement.
Package M
Speaker Stand Base
A
(x1)
Tools required
Phillips Head Screw driver(200mm length exclude the handle)
M6 Socket and Wrench
·
·
M5x16
M-B
(x1)M5x12
M-A
(x4) Steel Isolation Spike (x4)
M-C
Rubber Footpad (x4)
M-D
M6 Nut (x4)
M-E
Self Adhesive Pad (x4)
M-F
2
Pillar
B
(x1)
Mounting P a 1
C
l te (x1) Mounting 2
D
Plate (x1) Plastic Cover
E
(x1)
1
43
Attachment of footpad to metal base
1b. For carpet placement
Place speaker stand base(A) upside down on ground and thread steel isolation spikes (M-C) through M6 nut
(M-E)in the 4 holes.Adjust the height of speaker stand base by screwing the nut as request .as shown in fig.1.2.
1a. For hard floor placement
Place speaker stand base(A) upside down on ground and paste rubber footpad on the 4 holes, as shown in fig.1.1
2Attachment of speaker stand base to pillar
•Insert pillar (B) from the bottom of speaker stand base and turn pillar to align to mounting hole, Secure them with
M5x12(M-A)screw. Then tighten the screw ,but do not over tighten.
•Turn the base over ( isolation spikes can scratch floors, use caution) Please ensure cable outlet on top of pole is
in line with channel in base.as shown in fig.2.1.
Mounting plastic cover
3
Cover the speaker stand with the plastic cover (E) through pillar. as shown in fig.3.1
fig.1.1
M-D
A
fig.1.2
M-C
M-E
A
M-A
B
fig.2.1
fig.3.1
B
E
65
4Mounting plate
Attach mounting plate to the top of pillar with the appropriate combination of screw(M-B). Make sure mounting
plate is level. Then tighten the screw ,but do not over tighten. as shown in fig. 4.1 and fig.4.2.
5Mounting speaker
Remove the backing paper so the adhesive is exposed. Then place the adhesive pad on the mounting plate.
Peel the other side of the backing paper on the mounting Self adhesive pad . Then place the speaker on the
center of the mounting plate. as shown in fig.5.1 and fig.5.2.
M-B
C
M-B
D
fig.4.1
fig.4.2
fig.5.1
fig.5.2
Maintenance
Once you have mounted the stand and the speaker, check that they are sufficiently secure and safe to use.
You should check whether screws are fixed well each two months. If you have any doubts regarding the
installation, please consult our retailer or service department for detail.
M-F
M-F
Other Monoprice Speakers manuals
Monoprice
Monoprice DT-5BT User manual
Monoprice
Monoprice 13264 User manual
Monoprice
Monoprice Soundstage 3 User manual
Monoprice
Monoprice Pro Audio Series User manual
Monoprice
Monoprice 13193 User manual
Monoprice
Monoprice 44884 User manual
Monoprice
Monoprice 24431 User manual
Monoprice
Monoprice 36379 User manual
Monoprice
Monoprice PID11180 User manual
Monoprice
Monoprice 14447 User manual
Monoprice
Monoprice MM-5 User manual
Monoprice
Monoprice 10920 User manual
Monoprice
Monoprice 14446 User manual
Monoprice
Monoprice 34576 User manual
Monoprice
Monoprice 14889 User manual
Monoprice
Monoprice MP True User manual
Monoprice
Monoprice 13706 User manual
Monoprice
Monoprice Harmony XL User manual
Monoprice
Monoprice PID 13271 User manual
Monoprice
Monoprice DT-4BT User manual
