Monitor Audio Radius User manual

Monitor Audio 2004

Radius Floor Stand Fixing Instructions

Thank you and congratulations on purchasing our bespoke Monitor Audio Radius

Floorstand. This product has been designed using the most up-to-date computer

technology to provide you with an aesthetically pleasing stand for your loudspeakers, and

also to ensure that the exceptional sound quality is maintained. The stand incorporates a

heavy cast metal alloy base which offers great balance and stability.

With Radius comes simplicity, and it couldn’t be more simple to connect your speakers to

the stand. The stand comes fully assembled with our very own ‘Pure Flow’ loudspeaker

cable internally within the stand so that there is no awkward threading of cables. Simply

follow the step by step instructions below and then sit back and enjoy the big sound from

little speakers…

Please remember to always read the instructions first as they are sequenced to

provide a safe way of working.

This stand has been designed to be used with either the Radius 90 or the Radius 180

loudspeakers.

DO NOT CONNECT YOUR SPEAKER CABLES TO THE AMPLIFIER BEFORE ASSEMBLY.

CONTENTS LIST

Within this carton you will have:

2 x Radius Floorstands.

8 x Spikes.

4 x Radius loudspeakerfixing screws.

1 x Hex key

1 x Warranty card. Please note: When filling in the warranty card, there is no

serial number on the floorstand. Simply leave the serial number section blank and

fill in the model name/number section with ‘Radius Floorstand’

ASSEMBLY INSTRUCTIONS

1. Now that you have removed the carton, remove the polystyrene end-caps to reveal

your Radius Floorstands.

2. While the Floorstands are lying on the floor, now is the time to put the spikes in (if

you decide to use them), if you aren’t using the spikes move on to Step 3. This is

done by screwing them all the way into their threaded holes. Position the stands in

their desired locations to see if they are level. If the stand does not appear to be

level, unscrew one of the spikes slightly until the stand is level and tighten up the

lock nut. You are now ready to fix your Radius Loudspeakers to the stand.

Monitor Audio 2004

Radius Floor Stand Fixing Instructions

Fig. 2

Fig. 3 Fig. 4 Fig. 5

Fig. 6 Fig. 7

Fig. 1

3. Take either your Radius 90 or Radius 180, remove the small red and black plastic

caps from the terminals. A knife or fine blade screwdriver may be required to lever

these out (Fig. 1).

4. Remove the screws located either side of the terminal on the back (labelled ‘A’ and

‘B’ in fig. 2), from your loudspeaker. These can be removed with the hex key

provided with your stand.

5. Place the Radius loudspeaker fixing screws into their holes in the back of the stand

(Fig. 3). Carefully push your loudspeaker on to the terminals in the floorstand

terminal housing (Fig. 4), and while supporting the weight of the speaker, start to

tighten the screws until they are finger tight and bear the weight of the cabinet

(Fig.5).

6. Take the hex key (included in the packaging), and tighten the screw so that your

loudspeaker is held firmly in place.

7. If you intend to use 4mm banana plug terminations with your floorstand remove the

small red and black plastic terminal caps from the terminals on the base of the

floorstand (this is done in the same way as described in section 3). If you are using

bare wire terminations, leave these in place. If you choose to use banana plugs,

simply plug them straight into their correct terminal’s (Fig. 6), or if you are using

bare wire terminations, unscrew the terminal slightly and placing your cable into

the through hole and then tighten the terminal up again to hold the cable in place

(Fig. 7).

8. Connect the speaker cable to your amplifier.

Other manuals for Radius

Table of contents

Other Monitor Audio Speakers manuals

Monitor Audio

Monitor Audio Controlled Performance series User manual

Monitor Audio

Monitor Audio air stream WS100 User manual

Monitor Audio

Monitor Audio apex 10 User manual

Monitor Audio

Monitor Audio Apex AXSTW User manual

Monitor Audio

Monitor Audio CT380-IDC User manual

Monitor Audio

Monitor Audio ASB-2 User manual

Monitor Audio

Monitor Audio GSW12 User manual

Monitor Audio

Monitor Audio Creator Series User manual

Monitor Audio

Monitor Audio Trimless Series User manual

Monitor Audio

Monitor Audio SOUNDFRAME Service manual

Monitor Audio

Monitor Audio EN 50020 User manual

Monitor Audio

Monitor Audio Gold Reference GR20 User manual

Monitor Audio

Monitor Audio CPWT380 User manual

Monitor Audio

Monitor Audio AWC265 User manual

Monitor Audio

Monitor Audio Airstream S200 User manual

Monitor Audio

Monitor Audio Silver 50 User manual

Monitor Audio

Monitor Audio airstream WS100 User manual

Monitor Audio

Monitor Audio Controlled Performance series User manual

Monitor Audio

Monitor Audio 100 series Installation and operation manual

Monitor Audio

Monitor Audio ASB-2 User manual

Monitor Audio

Monitor Audio Silver RS User manual

Monitor Audio

Monitor Audio STUDIO User manual

Monitor Audio

Monitor Audio 200 series User manual

Monitor Audio

Monitor Audio Airstream s150 User manual

Popular Speakers manuals by other brands

argon audio

argon audio IE20 quick start

Denon

Denon SC-N7 owner's manual

Gemline

Gemline Ace 3952 user manual

Focal

Focal ON WALL 300 User manua

HEADRUSH

HEADRUSH Maximus HRSP 5024 manual

SoundLogic

SoundLogic BCCS-6/6395 instruction manual

Peavey

Peavey DTH 218 Specification sheet

Avantree

Avantree Pluto Air user guide

Morel

Morel Integra Series INTEGRA OVATION 4 install guide

Oppo

Oppo SONICA quick start guide

Bose

Bose SoundLink Wireless Music System owner's guide

Rocksteady

Rocksteady Stadium owner's manual

Bowers & Wilkins

Bowers & Wilkins 4 owner's manual

Sonance

Sonance SONOS OUTDOOR Series installation manual

Electro-Voice

Electro-Voice EVID FM4.2 Brochure & specs

Pioneer

Pioneer XW-HTD630 manual

Onn

Onn BWA16AA002 Product guide

HP GL313AA - USB Speakers PC Multimedia quick start guide