Monacor INC-150WIFI User manual
H.265 -1080P remote wireless hidden camera
Thank you for purchasing this product, the machine uses a unique
ultra-portable design, it can be applied in various fields, it is very
convenient, safe and bring a colorful life for you, please set your
camera correctly in accordance with the guidelines of the quick
steps .
Point key ON/OFF button to turn on, long press ON/OFF button for
3 seconds to turn off
(The MODE key is the reset button. Press and hold for 5 seconds in
the power-on state to restore the factory settings after automatic
restart)
The blue light is the power indicator. The power is always on. The
green light is the WIFI indicator and the red light is the charge
indicator. When the lamp is fully charged after charging
Specific models are as follows：
1. Ad hoc mode: Slow Green light flashing
2. Router mode: Green light flash
3 After you have configured remote camera: Green light
Under clear what mode, the camera can be reset at switch to point
mode.
Note: This must be reset at a red light flash or slow flash when you
press the reset built to be useful! Press the reset built around five
seconds off the whole machine lights let go until the camera starts to
complete (about 30 seconds).
II、APP software download
（图 1）（图 2）
Method 1. Scan the QR (picture 1) code directly to go to the download
screen (picture 2). Select appropriate download software according to
your mobile phone system. (Note: . This kind of
installation is only available for Chinese Mainland).
Method 2: For Android phones, search for APP software named
“HDMiniCam” in Google Play, download and install it.
For Iphone, APP software named “HDMiniCam” in App Store, download
and install it.
III、Point the camera phone connection
Enter the phone settings where WIFI signal inside, find the signal (this
is the machine UID number is unique to each machine) and connected.
as the picture shows
Then open the phone APP (IMINICAM) appears as shown in the figure,
this signal is the machine's UID UID of each machine is different, even
after clicking on the plus sign shown above to add into the camera as
shown below.
Click to go online camera appears as shown, click Skip to watch videos.
IV、Camera remote settings
In point can watch video, return to the previous enter the interface
shown
Click on the small gear Enter Advanced configuration shown below
Find the installation location of the signal router, configure the camera to enter a password into
the router as shown below.
OK, wait for the camera to complete restart, it takes about 40 seconds. Online from the camera
will turn off, then you can remotely access, and when the phone WIFI and cameras in the same
network which is a local area network, or any other phone connected to the 4G WIFI cell phone
signal APP will automatically reconnect the camera after a successful connection You can watch
the video.
1）.Download the computer client by downloading the address
https://www.monacor.com/de-de/monacor/service/#downloads
2）. Click on the successful installation will appear as shown in Figure
Desktop login box appears. (See below)
Enter the user name (admin) Click login (Note: The original user name is
admin without a password).
Enter
Enter
Enter Enter
Note:
The device name easy to remember just write
Paste on P2P UID
Password had not been changed, then that is 8888 if you have modified,
please fill in the date.
Note:
The device name easy to remember just write
Paste on P2P UID
Password had not been changed, then that is 8888 if you have modified,
please fill in the date.
7. Specifications
Resolution Ratio 1080P/720P/640P/320P
Video Format AVI
Frame Number 25
Visual Angle 150 degree
Motion Detection Camera
Shooting Straight line 6 meters
Minimal Illumination 1LUX
Video Duration Over 1 Hours
Compressed Format H.265
Recording Range 5㎡
Consumption 240MA/3.7V
Storage Temperature -20-80 degree centigrade
Operating Temperature -10-60 degree centigrade
Operation Humidity 15-85%RH
Memory Card Type TF card 128G IN MAX
Player Software VLCPlayer/SMPlayer
Computer Operating
System Windows/Mac OS X
Mobile Phone Operating
System Android/iOS
Web browser IE7 and above,chrome,firefox safari.etc
Largest customer 4
8.FAQ
1. Why remote monitoring is not smooth?
You should choose suitable resolution to watch according to your Internet.
2. Why SD card cannot save?
SD card must be formatted if this is your first time to use.
3. Why Connection is not on the network?
Select the correct connection way according to your network
4. Why APP remote viewing SD card video is not smooth?
As a result of the mobile decoding ability are different, and you can adjust
video equipment according to your mobile’s resolution
5. How to find my password?
To press reset key with 10 seconds and Restore the factory Settings.
Note:
The device name easy to remember just write
Paste on P2P UID
Password had not been changed, then that is 8888 if you have modified,
please fill in the date.
Special note:
1. If the camera is not connected to the router, please reset, even after a
hot machine to configure.
2. If the camera does not read the memory card, or mobile phone in the
LAN advanced settings in the background formatting after use.
3. Shutdown Reset: Please re-operation off and reset when you see the
red light.
Other Monacor Security Camera manuals
Monacor
Monacor INC-1500THERM User manual
Monacor
Monacor TVCCD-700COL User manual
Monacor
Monacor INC-5360DF User manual
Monacor
Monacor INC-4312BVM User manual
Monacor
Monacor security TVCCD-33COL User manual
Monacor
Monacor TVCCD-130A User manual
Monacor
Monacor TVCCD-28COL User manual
Monacor
Monacor TVCCD-147COL User manual
Monacor
Monacor TVCCD-350 User manual
Monacor
Monacor TVCCD-118 User manual
Monacor
Monacor TVCCD-462COL User manual
Monacor
Monacor TVCCD-255 User manual
Monacor
Monacor HDCAM-5090IR User manual
Monacor
Monacor TVCCD-150SET User manual
Monacor
Monacor TVCCD-1704COL User manual
Monacor
Monacor ELAX-2812DPTZ User manual
Monacor
Monacor TVCCD-450 User manual
Monacor
Monacor TVCCD-436HCOL User manual
Monacor
Monacor INC-4036DF User manual
Monacor
Monacor TVCCD-400 User manual
