ML Accessories CABBCCW Instruction Manual

INSTALLATION & MAINTENANCE MANUAL

CABBCCW / CABBCWW / CABCCW

CABCWW / CABWCW / CABWWW

These instructions should be read carefully and retained after installation by the end user for

future reference and maintenance.

These instructions should be used to aid installation of the following products:

CABBCCW / CABBCWW / CABCCW / CABCWW / CABWCW / CABWWW

GENERAL INSTRUCTIONS

• This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671)

and current Building Regulations. If in any doubt, consult a qualiﬁed electrician

• Please isolate mains prior to installation or maintenance

• Check the total load on the circuit (including when this luminaire is ﬁtted) does not exceed the rating of the

circuit cable, fuse or circuit breaker

• Please note the IP (Ingress Protection) rating of this product when deciding the location for installation

• When installing recessed, allow 50mm above and around the ﬁtting for air dissipation (do not cover the ﬁtting

with insulation)

• This product is for indoor use only

• This product is Class I and must be earthed

• This product is IP20 rated

SAFETY

INSTALLATION

Note - If this product is being used in conjunction with an external PIR or sensor, please conﬁrm with the

manufacturer of the sensors that they are compatible with LED luminaires.

• Provide power to the required point of installation

• To recess mount, cut a suitable hole in the mounting surface as per the cut-out details (see Fig. 1) ensuring

not to infringe with any joists, gas / water pipes or electrical cables

WARNING

This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance

testing. Irreparable damage will occur if this instruction is not followed.

INSTALLATION & MAINTENANCE MANUAL

These instructions should be read carefully and retained after installation by the end user for future reference

and maintenance.

These instructions should be used to aid installation of the following product(s):

CABBCCW / CABBCWW / CABCCW / CABCWW / CABWCW / CABWWW

SAFETY

•This product must be installed in accordance with the latest edition of the IEE Wiring Regulations

(BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician

•Please isolate mains prior to installation or maintenance

•Check the total load on the circuit (including when this luminaire is fitted) does not exceed the rating of

the circuit cable, fuse or circuit breaker

•Please note the IP (Ingress Protection) rating of this product when deciding the location for installation

•When installing recessed, allow 50mm above and around the fitting for air dissipation (do not cover the

fitting with insulation)

•This product is for indoor use only

•This product is Class I and must be earthed

•This product is IP20 rated

INSTALLATION

Note - If this product is being used in conjunction with an external PIR or sensor, please confirm with the

manufacturer of the sensors that they are compatible with LED luminaires.

•Provide power to the required point of installation

•To recess mount, cut a suitable hole in the mounting surface as per the cut-out details (see Fig. 1)

ensuring not to infringe with any joists, gas / water pipes or electrical cables

Fig. 1

•To surface mount, fix the outer housing to a suitable solid surface ensuring not to infringe with any gas

/ water pipes or electrical cables

•Connect the luminaire to the mains supply using a suitable junction box (not included), ensuring the

correct polarity is observed: L - Live (brown), E - Earth (green/yellow), N - Neutral (blue)

•Push the fitting securely into the cut-out or housing

•Switch on and check for correct operation

WARNING

This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance

testing. Irreparable damage will occur if this instruction is not followed.

GENERAL

Fig. 1

• To surface mount, ﬁx the outer housing to a suitable solid surface ensuring not to infringe with any gas /

water pipes or electrical cables

• Connect the luminaire to the mains supply using a suitable junction box (not included), ensuring the correct

polarity is observed: L - Live (brown), E - Earth (green/yellow), N - Neutral (blue)

• Push the ﬁtting securely into the cut-out or housing

• Switch on and check for correct operation

WARRANTY

This product has a warranty of 3 years from date of purchase. Failure to install this product in accordance with

the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will

invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place

of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation

costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve

the right to alter product speciﬁcation without prior notice.

GENERAL

The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole

luminaire should be replaced.

Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the

product.

This product is non-dimmable.

This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities

for where facilities exist.

DCAUG21_V3

ML Accessories Limited LU5 4LT

www.mlaccessories.co.uk

101

INTERNATIONAL

CONTACT DETAILS

INTERNATIONAL

CONTACT DETAILS

INTERNATIONAL

CONTACT DETAILS

This manual suits for next models

Table of contents

Other ML Accessories Lighting Equipment manuals

ML Accessories

ML Accessories 12DC50D Instruction Manual

ML Accessories

ML Accessories AX CCT Instruction Manual

ML Accessories

ML Accessories MLRCTM2 Instruction Manual

ML Accessories

ML Accessories BA01 Series Instruction Manual

ML Accessories

ML Accessories E27PR Instruction Manual

ML Accessories

ML Accessories LEDFRA6 Instruction Manual

ML Accessories

ML Accessories LEDFRA1 Instruction Manual

ML Accessories

ML Accessories CAPWGU Instruction Manual

ML Accessories

ML Accessories UNDKIT3WWW Instruction Manual

ML Accessories

ML Accessories AMLEDB Instruction Manual

ML Accessories

ML Accessories OWALL1 Series Instruction Manual

ML Accessories

ML Accessories TRIBCCW Instruction Manual

ML Accessories

ML Accessories SHE1BEM Instruction Manual

ML Accessories

ML Accessories BT ACTS Series Instruction Manual

ML Accessories

ML Accessories MLBA6045 Series Instruction Manual

ML Accessories

ML Accessories EMPOWER3 Instruction Manual

ML Accessories

ML Accessories WALL1 Instruction Manual

ML Accessories

ML Accessories TRLED14EM Instruction Manual

ML Accessories

ML Accessories FLN10 Instruction Manual

ML Accessories

ML Accessories 12DCIP40 Instruction Manual

ML Accessories

ML Accessories ENM5C Instruction Manual

ML Accessories

ML Accessories BATS2 Instruction Manual

ML Accessories

ML Accessories SUR5LED Instruction Manual

ML Accessories

ML Accessories WP15CTP Instruction Manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions