Mitsubishi Electric FX2N-64DP-M User manual
HARDWARE MANUAL
FX2N-64DP-M Profibus-DP Master Block
FX2N-64DP-M Profibus-DP Master Block
Foreword
• This manual contains text, diagrams and explanations which will guide the reader in the correct installation
and operation of the FX2N-64DP-M Profibus-DP Master Block. It should be read and understood before
attempting to install or use the unit.
• Further information can be found in the FX2N Series Hardware Manual, FX Series Programming Manual ΙΙ,
MELSEC ProfiMap Configuration System for Open Networks Software Manual and manual of Profibus-DP
slave units.
• If in doubt at any stage of the installation of FX2N-64DP-M Profibus-DP Master Block always consult a
professional electrical engineer who is qualified and trained to the local and national standards which apply to
the installation site.
• If in doubt about the operation or use of FX2N-64DP-M Profibus-DP Master Block please consult the nearest
Mitsubishi Electric distributor.
• This manual is subject to change without notice.
FX2N-64DP-M Profibus-DP
Master Block
Hardware Manual
FX2N-64DP-M Profibus-DP Master Block
Manual number :JY992D82901
Manual revision :D
Date :March 2001
FX2N-64DP-M Profibus-DP Master Block
ii
FX2N-64DP-M Profibus-DP Master Block
iii
Guidelines for the Safety of the User and Protection of the FX2N-64DP-M
Profibus-DP Master Block.
This manual provides information for the use of the FX2N-64DP-M Profibus-DP Master Block.
The manual has been written to be used by trained and competent personnel. The definition of
such a person or persons is as follows:
a) Any engineer who is responsible for the planning, design and construction of automatic
equipment using the product associated with this manual, should be of a competent
nature, trained and qualified to the local and national standards required to fulfill that
role. These engineers should be fully aware of all aspects of safety with regards to
automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and
qualified to the local and national standards required to fulfill that job. These engineers
should also be trained in the use and maintenance of the completed product. This
includes being completely familiar with all associated documentation for said product. All
maintenance should be carried out in accordance with established safety practices.
c) All operators of the completed equipment should be trained to use that product in a safe
and co-ordinated manner in compliance to established safety practices. The operators
should also be familiar with documentation which is connected with the actual operation
of the completed equipment.
Note : The term ‘completed equipment’ refers to a third party constructed device which
contains or uses the product associated with this manual.
FX2N-64DP-M Profibus-DP Master Block
iv
Note’s on the Symbols Used in this Manual
At various times through out this manual certain symbols will be used to highlight points of
information which are intended to ensure the users personal safety and protect the integrity of
equipment. Whenever any of the following symbols are encountered its associated note must
be read and understood. Each of the symbols used will now be listed with a brief description of
its meaning.
Hardware Warnings
1) Indicates that the identified danger WILL cause physical and property damage.
2) Indicates that the identified danger could POSSIBLY cause physical and property
damage.
3) Indicates a point of further interest or further explanation.
Software Warnings
4) Indicates special care must be taken when using this element of software.
5) Indicates a special point which the user of the associate software element should
be aware.
6) Indicates a point of interest or further explanation.
FX2N-64DP-M Profibus-DP Master Block
v
• Under no circumstances will Mitsubishi Electric be liable responsible for any consequential
damage that may arise as a result of the installation or use of this equipment.
• All examples and diagrams shown in this manual are intended only as an aid to
understanding the text, not to guarantee operation. Mitsubishi Electric will accept no
responsibility for actual use of the product based on these illustrative examples.
• Owing to the very great variety in possible application of this equipment, you must satisfy
yourself as to its suitability for your specific application.
FX2N-64DP-M Profibus-DP Master Block
vi
vii
Table of Contents
Guideline.............................................................................................iii
1. Introduction............................................................................................1-1
1.1 Features of the 64DP-M ......................................................................................1-1
1.2 External Dimensions and Each Part Name .........................................................1-2
1.2.1 Pin Configuration of Profibus-DP Communication Port.............................................1-5
1.3 System Configuration ..........................................................................................1-6
1.3.1 Applicable Profibus-DP Network ...............................................................................1-6
1.3.2 Applicable Programmable Controller.........................................................................1-9
2. Wiring and Mounting .............................................................................2-1
2.1 Mounting..............................................................................................................2-2
2.1.1 Arrangements............................................................................................................2-2
2.1.2 Mounting....................................................................................................................2-2
2.2 Wiring ..................................................................................................................2-4
2.2.1 Wiring of Power Supply.............................................................................................2-4
2.2.2 Wiring of Profibus-DP................................................................................................2-6
2.2.3 Terminating Resistor .................................................................................................2-7
FX2N-64DP-M Profibus-DP Master Block
FX2N-64DP-M Profibus-DP Master Block
viii
3. Specifications ........................................................................................3-1
3.1 General Specifications.........................................................................................3-1
3.2 Power Supply Specifications ...............................................................................3-1
3.3 Performance Specifications.................................................................................3-2
4. Mode and Displayed Station Address ...................................................4-1
4.1 Mode....................................................................................................................4-1
4.1.1 Mode Setting Switch..................................................................................................4-2
4.2 Displayed Station Address ..................................................................................4-3
5. Diagnostics............................................................................................5-1
5.1 Preliminary Checks..............................................................................................5-1
5.2 Check the Status of the LEDs for the 64DP-M....................................................5-2
5.3 Self Diagnostic of the 64DP-M ............................................................................5-6
Appndix A
Further Information Manual List ...............................................................A-1
This manual suits for next models
1
Table of contents
Other Mitsubishi Electric Controllers manuals
Mitsubishi Electric
Mitsubishi Electric FX3G SERIES Instruction manual
Mitsubishi Electric
Mitsubishi Electric FX3G-5DM Instruction manual
Mitsubishi Electric
Mitsubishi Electric MELSEC Q Series User manual
Mitsubishi Electric
Mitsubishi Electric MELSEC-F FX2N-1HC User manual
Mitsubishi Electric
Mitsubishi Electric MS-T Series User manual
Mitsubishi Electric
Mitsubishi Electric LCPU-U-HW Instruction Manual
Mitsubishi Electric
Mitsubishi Electric PAC-YG66 DCA-J Service manual
Mitsubishi Electric
Mitsubishi Electric MELSEC-FX3S Series User manual
Mitsubishi Electric
Mitsubishi Electric MELSEC iQ-F FX5 User manual
Mitsubishi Electric
Mitsubishi Electric MR-J5-B User manual
Mitsubishi Electric
Mitsubishi Electric FX3U-1PSU-5V User manual
Mitsubishi Electric
Mitsubishi Electric NZ2GN2S1-16D User manual
Mitsubishi Electric
Mitsubishi Electric FX3U-8AV-BD User manual
Mitsubishi Electric
Mitsubishi Electric R64MTCPU User manual
Mitsubishi Electric
Mitsubishi Electric MELSEC Q Series User manual
Mitsubishi Electric
Mitsubishi Electric MELSEC iQ-R Series User manual
Mitsubishi Electric
Mitsubishi Electric MELSEC FX-2DA User manual
Mitsubishi Electric
Mitsubishi Electric FX2NC-16EX-DS User manual
Mitsubishi Electric
Mitsubishi Electric MELSEC iQ-RD77MS2 User manual
Mitsubishi Electric
Mitsubishi Electric MELSEC FX3U-232ADP User manual
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
