MIMAKI JFX 200-2513 User manual
PRODUCT GUIDE
Mimaki USA v1.0 Nov. 2013
JFX200-2513 LED UV Flatbed Printer
1
Mimaki USA v1.0 Nov. 2013
Features | JFX200-2513
Features
Newest Member
The JFX200-2513 is our newest member of the JFX Series LED Lamp flatbed printers
Smaller Footprint
JFX200-2513 is a smaller flatbed version of the JFX500-2131. It offers a compact
bed size of 4 ft x 8 ft and prints in landscape orientation while offering a space-
saving footprint.
Balance of Quality and Speed
Despite being a lower cost model, the quality and productivity are inherited from the
higher priced JFX500-2131.
User Friendly Operation
Front-Access: Operation panel, Vacuum valve and Ink System are all located on the
front side, allowing for easy access operation without moving around to the side of the
printer.
Layout Pins: Layout pins are useful for setting the media at the origin.
2
Mimaki USA v1.0 Nov. 2013
Features - Pt.2 | JFX200-2513
Features - Pt.2
Reliability Accomplished by Stable Printing
Ink Circulation System: prevents white ink from settling
Nozzle Recovery Function: performs continuous printing even if some nozzles
are clogged.
Environmentally Safe and Energy Saving LED-UV Curing Light
LED-UV lamps have a long life and low power consumption. They also eliminate
the media deformation and discoloration caused by heat generated from older
metal halide lamps..
3
Mimaki USA v1.0 Nov. 2013
Head Configuration / Print Area | JFX200-2513
Head Configuration / Print Area
4
Mimaki USA v1.0 Nov. 2013
Major Differences from JFX500-2131 | JFX200-2513
Major Differences from JFX500-2131
Benefits of LED UV
JFX500 Standard 645 sq.ft./hr (4C Model) 484 sq.ft./hr (4C+W)
JFX200 Standard 269 sq.ft./hr (4C Model) 134 sq.ft./hr (4C+W)
Lamp placement
The lamp placement is rearranged according to the head placement
Reduction of installation time by integrated packing and crating of unit
MBIS III is unique
The low cost ink supply system uses 1 liter bottles as ink receptacles.
- Use the special “jig/cap” included with the ink
- Screw on the “jig/cap” assembly
- Turn bottle upside down to install
- Turn in to break seal
- Ink decants into the holding reservoir
Honeycomb bed design is incorporated for strength and reduction of weight
Rack and pinion feeding method for accurate drop placement and positioning
5
Mimaki USA v1.0 Nov. 2013
System Configuration | JFX200-2513
System Configuration
6
Mimaki USA v1.0 Nov. 2013
Long Life LED-UV Curing Unit | JFX200-2513
Long Life LED-UV Curing Unit
Low VOCs (Volatile Organic Compounds) / Ozone Reduced LED Lamp
Low VOCs and less odor. No ventilation system required.
Energy Efficient, Cost Effective Lamps Do Not Require Replacement
- Generates little heat and lights up on demand.
- Reduced total cost by low energy consumption
Heat Output Reduction with LED
The temperature of conventional metal halide lamps can reach 158°F, causing
media deformation. UV LED lamps cure at a much lower temperature so heat
sensitive substrates are not damaged. Installation costs are also reduced because
no special ventilation is required.
Increased Productivity
The long-life LED-UV lamp does not require maintenance or bulb replacement.
(The life of a metal halide lamp is about 1,000 hours)
Metal halide lamps require warm up and cool down time. LED-UV lamps turn on and
off instantly and are ready to use immediately after the printer is turned on.
Mimaki USA v1.0 Nov. 2013 7
Head Configuration / Print Speed | JFX200-2513
Head Configuration / Print Speed
269 ft2/h
129 ft2/h
43 ft2/h
ft2/h
ft2/h
134.5 ft2/h
64.5 ft2/h
21 ft2/h
The head assemblies are in a staggered configuration pattern. The simultaneous
printing of color and white is attained by the white ink model.
8
Mimaki USA v1.0 Nov. 2013
MAPS II & Variable Dot | JFX200-2513
MAPS II & Variable Dot
MAPS II
MAPS eliminates banding by dispersing ink drops between passes. With this
technology, the image quality of high productivity mode and the uneven print
density using solid colors to reduce banding is improved.
Variable Dot
The variable dot technology uses 3 different dot sizes, large, medium and small,
to deliver high quality images with smooth gradations.
Mimaki Advanced Pass System
9
Mimaki USA v1.0 Nov. 2013
Prints up to 2” Media | JFX200-2513
Prints up to 2” Media
Print on media up to 2” thick. The maximum loadable substrate weight is up
to 110 lbs (50kg).
Head Gap
The gap between the head assembly and the substrate should be less than 2mm.
If the gap is set wider than 2mm, the ink drop tends to become distorted before it reaches
the substrate. Furthermore, if the gap is too wide, the reflected light from the UV
curing lamp increases. This could lead to drops misting on the nozzle plate surface
that may clog the print head nozzles.
Other manuals for JFX 200-2513
5
Table of contents
Other MIMAKI Printer manuals
MIMAKI
MIMAKI JFX200-2513EX Installation instructions
MIMAKI
MIMAKI JV300-130A Maintenance manual
MIMAKI
MIMAKI JV5-320S User manual
MIMAKI
MIMAKI Tiger600-1800TS Guide
MIMAKI
MIMAKI UJV100-160 User manual
MIMAKI
MIMAKI UJF-7151 plus User manual
MIMAKI
MIMAKI JV22-130 User manual
MIMAKI
MIMAKI TX500-1800DS User manual
MIMAKI
MIMAKI JV33-260 User manual
MIMAKI
MIMAKI jV100-160 User manual
MIMAKI
MIMAKI JFX-1631/1615 Plus User manual
MIMAKI
MIMAKI JV33-260BS User manual
MIMAKI
MIMAKI TS500P-3200 Maintenance manual
MIMAKI
MIMAKI JFX200-2531 Maintenance manual
MIMAKI
MIMAKI UJF-A3MkII Series User manual
MIMAKI
MIMAKI JV400-SUV Series Installation instructions
MIMAKI
MIMAKI CJV300-130 Maintenance manual
MIMAKI
MIMAKI TS300P-1800 Maintenance manual
MIMAKI
MIMAKI JFX500-2131 User manual
MIMAKI
MIMAKI JV33-260BS User manual
