Midea FS45-23MRD User manual

FS45-23MRD

USER MANUAL

Warning notices: Before using this product, please read this manual carefully and keep it for future reference.

The design and speciﬁcations are subject to change without prior notice for product improvement.

Consult with your dealer or manufacturer for details.

The diagram above is just for reference. Please take the appearance of the actual product as the standard.

STAND FAN

THANK YOU LETTER

Thank you for choosing Midea! Before using your new Midea product, please read

this manual thoroughly to ensure that you know how to operate the features and

functions that your new appliance offers in a safe way.

CONTENTS

1 6

1 5

1 7

1 4

1 1

THANK YOU LETTER

SAFETY INSTRUCTIONS

SPECIFICATIONS

PRODUCT OVERVIEW

PRODUCT INSTALLATION

OPERATION INSTRUCTIONS

CLEANING AND MAINTENANCE

TROUBLESHOOTING

TRADEMARKS, COPYRIGHTS AND LEGAL STATEMENT

DATA PROTECTION NOTICE

Danger

This symbol indicates that there are dangers to the life and health of

persons due to extremely ﬂammable gas.

Warning of electrical voltage

This symbol indicates that there is a danger to life and health of

persons due to voltage.

Warning

The signal word indicates a hazard with a medium level of risk which, if

not avoided, may result in death or serious injury.

Caution

The signal word indicates a hazard with a low degree of risk which, if

not avoided, may result in minor or moderate injury.

Attention

The signal word indicates important information (e.g. damage to

property), but not danger.

Observe instructions

This symbol indicates that a service technician should only operate and

maintain this appliance in accordance with the operating instructions.

The following safety guidelines are intended to prevent unforeseen risks or damage from

unsafe or incorrect operation of the appliance. Please check the packaging and appliance

on arrival to make sure everything is intact to ensure safe operation. If you ﬁnd any

damage, please contact the retailer or dealer. Please note modiﬁcations or alterations to

the appliance are not allowed for your safety concern. Unintended use may cause

hazards and loss of warranty claims.

Read these operating instructions carefully and attentively before using/commissioning the

unit and keep them in the immediate vicinity of the installation site or unit for later use!

Intended Use

Explanation of Symbols

SAFETY INSTRUCTIONS

Caution

●

Read rules for safe operation and instructions carefully.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person

responsible for their safety. Children should be

supervised to ensure that they do not play with the

appliance.

Keep electrical appliances out of reach from Children or

infirm persons. Do not let them use the appliances

without supervision.

When the appliance is not in use and before cleaning,

unplug the appliance from the outlet.

When the fan was assembled, the rotor blade guard

shall not be taken off anymore.

- Prior to cleaning, unplug the fan.

- The rotor guard shall not be dissembled/opened to

clean the rotor blades.

- Wipe the fan enclosure and rotor blade guard with a

slightly damp cloth.

Never insert fingers, pencils, or any other object

through the grille when fan is running.

Disconnect fan when moving from one location to

another.

Indoor and household use only.

●

If the supply cord is damaged, it must be replaced by

manufacturer or its service agent or a similarly qualified

person in order to avoid a hazard.

To protect against the risk of electrical shock, do not

immerse the unit, cord or plug in water or other liquid.

When the appliance is not in use and before cleaning,

unplug the appliance from the outlet.

Ensure that the fan is switched off from the supply

mains before removing the guard.

DISPOSAL: Do not dispose of electrical appliances as

unsorted municipal waste, use separate collection

facilities. Contact your local government for

information regarding the collection systems available.

If electrical appliances are disposed of in landfills or

dumps, hazardous substances can leak into the

groundwater and get into the food chain, damaging

your health and well-being.

For non-user replaceable light sources: The light

sources in this luminaires can only be replaced by the

manufacturer or its service agent or similarly qualified

person.

The battery must be removed from the appliance

before it is scrapped；the appliance must be

disconnected from the supply mains when removing

the battery；the battery is to be disposed of safely；

this appliance contains batteries that are

non-replaceable.

Warning

SPECIFICATIONS

FS45-23MRDProduct Model

Voltage

Frequency

Power

Rated Current

Power Factor

220-240V~

50/60Hz

25W

0.5A

0.5

PRODUCTOVERVIEW

Component Name

NOTE

All thepictures inthis manual are for explanation purpose only.Any discrepancy between

the real object and the illustration in the drawing shall be subject tothe real subject.

Remove parts from the component before performing installation.

Fan head

Install

screw

Tighten

knob

Fan body

Plastic nut

Chassis

Rear grill

Plastic nut

Spinner

Cable terminal

protection box

Blade

Front grill

PRODUCTINSTALLATION

Installation Procedures

NOTE

Before installation, first remove chasis screws from the pole, remove the Spinner and

Plastic nut from the motor shaft, and then install.

1 Chassis installation

Alignthelower pole and thechassis, and then fasten securely with chassis screws.

2 Cable terminal protection box installation

2.1 The terminal of the fan head is connected to the terminal of the fan body.

2.2 Put the inserted terminals intotheprotective box and cover the upper protective box.

2.3 Place the protectionbox with theterminal installed into thepipe hole of the fan body.

connecting

terminal male

and female

Protectionbox installation Protective box placement

3 Fan head installation

3.1 Install and fix the fan body by way of tightening or loosening install screw.

3.2 Pull out and fix the internal pole (column) after adjusting the height by way of

tightening or loosening the knob.

4 Installation of Rear Grill

Alignthe holes of rear grill withthe protruded points on the motor housing.

5 Installation of Plastic Nut

Screw clockwise the plastic nut tightly to fasten the rear grill.

Install screw Height Adjustment

Height

Adjustment

Key

Clockwise

This manual suits for next models

Table of contents

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual