Midea FS40-11NR User manual

GD Midea Environment Appliances MFG.CO.,Ltd.

Midea Industrial Park, Dongfu Road, Dongfeng Town, Zhongshan, Guangdong,

528425, P.R.China

ELECTRIC FAN

OWNER’S MANUAL

16" Stand Fan

MODEL: FS40-11NR

READ AND SAVE THESE INSTRUCTIONS

Attention: Pictures in the IM are for reference only.

Read Rules for Safe Operation and Instructions Carefully.

CAUTION

1. If the supply cord is damaged, it must be replaced by manufacturer

or its service agent or a similarly qualified person in order to avoid

a hazard.

2. To protect against the risk of electrical shock, do not immerse the

unit, cord or plug in water or other liquid.

3. This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in

a safe way and understand the hazards involved. Children shall

not play with the appliance. Cleaning and user maintenance shall

not be made by children without supervision.

4. When the appliance is not in use and before cleaning, unplug the

appliance from the outlet.

5. Keep electrical appliances out of reach from Children or infirm

persons. Do not let them use the appliances without supervision.

6. When the fan was assembled, the rotor blade guard shall not be

taken off anymore

- Prior cleaning unplug the fan.

- The rotor guard shall not be dissembled/opened to clean the

rotor blades.

- Wipe the fan enclosure and rotor blade guard with a slightly

damp cloth.

WARNING

1. Never insert fingers, pencils, or any other object through the grille when fan is

running.

2. Disconnect fan when moving from one location to another.

3. Be sure fan is on a stable surface when operating to avoid overturning.

4. DO NOT use fan in window, rain may create electrical hazard.

5. Household use only.

RULES FOR SAFE OPERATION

PART FIGURE

Note: All the pictures in this manual are for explanation purpose only. Any discrepancy between

the real object and the illustration in the drawing shall be subject to the real subject.

[01]x1 [06]x1

[02]x1

[03]x1

[04]x1

[07]x1

[05]x1 [08]x1

Circlip

Front Grill

Grill

Clip

Rear Grill Motor

shaft Internal Pole

Extension Pole

Chassis

7-shape Bolt

Height

adjustment ring

Clutch knob

Motor

housing

Spinner

Blade

Plastic Nut

Thumb

screw

1. Unscrew the 7-shape Bolt from the Extension Pole. (Fig.1)

2. Insert the extension pole into the chassis and tighten the 7-shape Bolt (Fig.2)

3. From the extension pole loosen the height adjustment ring and adjust the internal

pole to the desired height. (Note: If you can’t find the internal pole, it must inside

the extension pole. You can pull it out from the extension pole.) (Fig.3)

4. To attach the head unit to the internal pole, loosen the thumb screw on the bottom

of the head unit. Place the head unit on the internal pole and tighten the thumb

screw in alignment with the groove on the internal pole. (Fig.4)

CAUTION: Height adjustment ring must be fully fastened before the assembly of the

motor section to the internal pole.

ASSEMBLY OF CHASSIS & COLUMN UNIT

Annulargroove

Mountinghole

Thumb screw

Fig.3

Looseen

Fig.4

Fig.1Fig.2

GRILL & FAN BLADE ASSEMBLY

1. Unscrew the spinner clockwise (or take the spinner out from the bag) and the

plastic nut counterclockwise to remove both of them. Fix the rear grill to the

motor then tighten the plastic nut again. (Fig.5)

2. Insert the blade into shaft, and make sure the rotor shaft pin is fitted into groove

of the blade. Turn the spinner counterclockwise to tighten the blade. (Fig.6)

3. Fix the front grill and the rear grill with circlip clip and then use the fasten clip to

tighten the fan grill. (Fig.7)

Fig.5 Fig.6 Fig.7

Natural wind

Press the “mode” key to select the natural wind, then press the “speed” repeatedly

to choose 3 speed.

Sleep wind

Press the “mode” key to select the sleep wind, then press the “speed” repeatedly

to choose 3 speed.

4. “ ” KEY

Press this key to select mode. The sequence is normal, natural

and sleep when this key being touched repeatedly or

continuously. The light can indicate mode state.

Normal wind

Press the “mode” key to select the normal wind, then press

the “speed” repeatedly to choose 3 speed. Fig.9

OPERATING INSTRUCTION

I. Remote Controller (Fig.8)

a. KEY INSTRUCTION

1. “ ” KEY

The “ ” key is for switching on the fan .The fan will be started

at breeze step.

Press the “ ” key if the fan needs to switch off.

2. “ ” KEY

When the fan started, press this key repeated, the fan will work

with “I-II-III” circulatory.

3. “ ” KEY

Press this key repeatedly, the fan will off after “1-2-3-4-5-6-7” hour.

Press the timer button continually to set the timer off function between 1 and 7 hours.

Each press is an increment of 1 hours.

The OSCILLATION button is located on the head of the fan.

To start oscillation, push button down. To stop oscillation,

pull the oscillating knob up.

Fig.8

Fig.10

b. BATTERIES

(battery not included in the packing)

(1) Slide the battery compartment Cover.

(2) Insert the batteries, and make sure that the

batteries are placed as shown in the Fig.10.

(3) Slide back the battery cover.

NOTES: Use size “AAA” manganese or alkaline

batteries. Do not use rechargeable batteries.

c. BATTERY WARNING AS BELOW

1. “Do not dispose of batteries in fire, batteries may

explode or leak.”

2. -Do not mix old and new batteries.

3. -Do not mix alkaline, standard (carbon-zinc) or

rechargeable (nickel-cadmium) batteries.

d. REMOTE CONTROLLER OPERATION

Point the remote controller at the receptor on body of the fan and press the desired

button. The remote controller will work at distances of up to roughly five meters and

the angle of 30 degree included between right and left from the receptor.

The batteries must be removed from the remote controller before it is scrapped and

that they are disposed of safely.

e. OVERHEAT PROTECTION OF THE MOTOR

The windings of the motor have a thermal-fuse that burns out and the fan switches

off and temperature of the motor is no longer going up so that plastic parts of the fan

don’t subject to deformation so far so to be burned by the overheat if the motor is

overheat for any unexpected reason.

II. Control Panel (Fig.9)

These keys of the control panel may be used as same as of the remote controller.

III. Oscillation Control

To make the fan oscillate, press the clutch knob located on the top of the motor

housing. To get the directional airflow, pull the clutch knob up to its initial position.

IV. Tilt Adjustment

To adjust the air flow upward or downward, push the grilles lightly to the desired

direction.

V. Height Adjustment

The height of the fan can be adjusted by loosening the height adjustment ring

carefully raising or lowering the fan and firmly re-tightening the height adjustment

ring.

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified

service personnel if service is needed.

1. Before cleaning and assembling, fan must be unplugged.

2. To ensure adequate air circulation to the motor, keep vents at the rear of the

motor free of dust. Do not disassemble the fan to remove dust.

3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.

4. Do not use any abrasive detergent or solvents to avoid scratching the surface.

Do not use any of the following as a cleaner: gasoline, thinner.

5. Do not allow water or any other liquid into the motor housing or interior parts.

CLEANING

MAINTENANCE INSTRUCTION

1. Be sure to unplug from the electrical supply source before cleaning.

2. Plastic parts should be cleaned with a soft cloth moisten with mild soap.

Thoroughly remove soap film with dry cloth.

DISPOSAL: Do not dispose of electrical appliances as unsorted

municipal waste, use separate collection facilities. Contact your

local government for information regarding the collection systems

available. If electrical appliances are disposed of in landfills or dumps,

hazardous substances can leak into the groundwater and get into the food chain,

damaging your health and well-being.

Table of contents

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual