Midea WCPPHA06CRA User manual

Portable Air

Conditioner

USER MANUAL

WCPPHA06CRA

WCPPH08CRA

WCPPH10CRA

version A - 019 - 2019

Preparation.............................................................................................................................................2

Safety Precautions.................................................................................................................................4

Cautions..................................................................................................................................................5

Installation..............................................................................................................................................6

Operation..............................................................................................................................................10

Maintenance....................................................................................................................................... .12

Faults Diagnosis..................................................................................................................................13

Design and Compliance Notes...........................................................................................................14

Remote Control Instructions ..............................................................................................................15

Air Conditioner Limited Warranty...........................................................................................................26

TABLE OF CONTENTS

Preparation

rear

front

bottom tray

drain outlet

handle

(both sides)

air filter

(behind the grille)

upper air intake

air outlet

lower air intake

drain outlet

control panel

horizontal louver control

lever(adjust manually)

NOTE: WCPPHA06CRA can

not be adjusted.

NOTE: WCPPHA06CR can

not be adjusted.

vertical louver control

lever(adjust manually)

panel

Caster

Safety Precautions

-Installation must be performed according to the installation instructions. Improper installation

can cause water leakage, electrical shock, or ﬁre.

-Use only the included accessories and parts, and speciﬁed tools for the installation. Using

non-standard parts can cause water leakage, electrical shock, ﬁre, and injury or property

damage.

-Make sure that the outlet you are using is grounded and has the appropriate voltage. The

power cord is equipped with a three-prong grounding plug to protect against shock. Voltage

information can be found on the side of the unit, behind the grille.

-Install the unit in on a ﬂat, sturdy surface. Failure to do socould result in damage or excessive

noise and vibration.

-The unit must be kept free from obstruction to ensure proper function and to mitigate safety

hazards.

-DO NOT modify the length of the power cord or use an extension cord to power the unit.

DO NOT share a single outlet with other electrical appliances. Improper power supply can

cause ﬁre or electrical shock.

-DO NOT install your air conditioner in a wet room such as a bathroom or laundry room. Too

much exposure to water can cause electrical components to short circuit.

-DO NOT install the unit in a location that may be exposed to combustible gas, as this could

cause ﬁre.

-The unit has wheels to facilitate moving. Make sure not to use the wheels on thick carpet or

to roll over objects, as these could cause tipping.

-DO NOT operate a unit that has been dropped or damaged.

-Only use the included accessories and speciﬁed parts for installation. Using nonstandard

parts can cause water leakage, electrical shock, ﬁre, and injury or property damage.

-The unit must be kept free from obstruction to ensure proper function.

-DO NOT allow children to play with the air conditioner. Children must be supervised around

the unit at all times.

-If the air conditioner is knocked over during use, turn off the unit and unplug it from the main

power supply immediately. Visually inspect the unit to ensure there is no damage. If you

suspect the unit has been damaged, contact a technician or customer service for assistance.

-In a thunderstorm, the power must be cut off to avoid damage to the machine due to lightning.

Please read through these instructions before you start the installation process.

Improper installation can cause damage to the unit, your personal property, and

also poses a personal safety hazard.

Cautions

-This appliance can be used by children aged from 8 years and above and person with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe way and understand the

hazards involved. Children shall not play the appliance. Cleaning and user maintenance shall not

be made by children without supervision. (be applicable for the European Countries)

-This appliance is not intended for use by persons (including childern) with reduced physical,

sensory or mental capabilities or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

(be applicable for other countries except the European Countries )

-Children should be supervised to ensure that they do not play with the appliance.

-If the supply cord is damaged, it must be replaced by the manufacturer,its service agent or

similarly qualified persons in order to avoid a hazard.

-Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.

-Do not install the appliance in a location that may be exposed to combustible gas.

-If combustible gas accumulates around the unit, it may cause fire.

-Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings.

-Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it

will not be tripped over.

-Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized

service facility for examination and/or repair.

-To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control

device.

-The appliance shall be installed in accordance with national wiring regulations.

-Contact the authorised service technician for repair or maintenance of this unit.

-Contact the authorised installer for installation of this unit.

-When there are wide differences between "USER' S MANUAL" and "Remote controller

Illustration" on function description, the description on "USER' S MANUAL " shall prevail.

-Do not operate your air conditioner in a wet room such as a bathroom or laundry room.

Installation

Choosing The Right Location

Your installation location should meet the following

requirements:

-Make sure that you install your unit on an even

surface to minimize noise and vibration.

-The unit must be installed near a grounded plug,

and the Collection Tray Drain (found on the back

of the unit) must be accessible.

-The unit should be located at least 30cm (12”) from

the nearest wall to ensure proper air conditioning.

-DO NOT cover the Intakes, Outlets or Remote

Signal Receptor of the unit, as this could cause

damage to the unit.

Note About Fluorinated Gasses

-This air-conditioning unit is a hermetically sealed unit that contains ﬂuorinated gasses.

For speciﬁc information on the type of gas and the amount, please refer to the relevant label

on the unit itself.

-Installation, service, maintenance and repair of this unit must be performed by a certiﬁed

technician.

-Product uninstallation and recycling must be performed by a certiﬁed technician.

-If the system has a leak-detection system installed, it must be checked for leaks at least

every 12 months.

-When the unit is checked for leaks, proper record-keeping of all checks is strongly

recommended.

All the illustrations in the manual are for explanation purpose only. Your machine may be

slightly different. The actual shape shall prevail.The unit can be controlled by the unit control

panel alone or with the remote controller. This manual does not include Remote Controller

Operations, see the <<Remote Controller Instruction>> packed with the unit for details.

NOTE:

Installation

Tools Needed

-Medium Philips screwdriver; -Tape measure or ruler; -Knife or scissors;

-Saw (optional, to shorten window adaptor for narrow windows)

Accessories

Your Window Installation Kit ﬁts windows 67.5-123cm(26.5-48”) and can be shortened for

smaller windows.

Window Installation Kit

Press the exhaust hose into

the window slider adaptor

and unit adaptor, clamp

automatically by elastic

buckles of the adaptors.

Push the Exhaust hose

into the airoutlet opening

of the unit along the arrow

direction.

Step One: Preparing the

Exhaust Hose assembly

Step Two: Install the

Exhaust hose assembly

to the unit

Step Three: Preparing

the Adjustable Window

Slider

1. Depending on the size of

your window, adjust the

size of the window slider.

2. If the length of the window

requires two window sliders,

use the bolt to fasten the

window sliders once they

are adjusted to the proper

length.

Window slider A Window slider B

Bolt

Part Description

1 pc

2 pc

1 set

Unit Adaptor

Window Slider Adaptor

Window Slider A

Window Slider B

Exhaust Hose

Bolt

Foam Seal A (Adhesive)

Foam Seal B (Adhesive)

Foam Seal C (Non-adhesive)

Security Bracket and 2 Screws

Drain Hose

Quantity

Remote Controller and Battery

(For remote control models only)

MODE

SLEEPLED

CLOCK

CANCEL

TIMER

FAN

RESET

LOCK

CLOCK

OFF

SET T EMP.

FANSPEED

AUTO

SWING

TURBO

FOLL OW ME

Unit adaptor Window slider

adaptor

Exhaust hose Exhaust hose

assembly

Installation

Note: Once the Exhaust Hose assembly and Adjustable Window Sliderare prepared,

choose from one of the following two installation methods.

Cut the adhesive foam seal A

and B strips to the proper

lengths, and attach them to

the window sash and frame

as shown.

Cut the adhesive foam seal A

and B strips to the proper

lengths, and attach them to

the window sash and frame

as shown.

Cut the non-adhesive foam

seal C strip to match the width

of the window. Insert the seal

between the glass and the

window frame to prevent air

and insects from getting into

the room.

If desired, install the security

bracket with 2 screws as

shown.

Insert the window slider adaptor

into the hole of the window slider.

Insert the window slider

assembly into the window

opening.

Insert the window slider

assembly into the window

opening.

Type 1: Hung Window Installation

Foam seal B

(Adhesive type-shorter)

2 Screws

Security Bracket

Foam seal A

(Adhesive type)

Window slider A

Window slider B

(if required)

Type 2: Sliding Window Installation

Foam seal B

(Adhesive type-shorter)

Foam seal A

(Adhesive type)

Window slider A

Window slider B

(if required)

Foam seal C

(Non-adhesive type)

Cut the non-adhesive foam

seal C strip to match the

window height. Insert the foam

seal between the glass and the

window frame to prevent air

and insects from getting into

the room.

Foam seal C

(Non-adhesive type)

Installation

If desired, install the security

bracket with 2 screws as shown. Insert the window slider adaptor

into the hole of the window slider.

2 Screws

Security

Bracket

Note: To ensure proper function, DO NOT overextend or bend the hose. Make

sure that there is no obstacle around the air outlet of the exhaust hose (in the

range of 500mm) in order to the exhaust system works properly. All the

illustrations in this manual are for explanation purpose only. Your air

conditioner may be slightly different. The actual shape shall prevail.

Operation

MODE button

Selects the appropriate operating

mode. Each time you press the

button, a mode is selected in a

sequence that goes from COOL,

FAN and DRY .The mode indicator

light illuminates under the different

mode setting.

Used to adjust (increasing/decreasing)

temperature settings in 1°C/1°F

increments in a range of 17°C/62°F to

30°C/86°F.

Power button

Power switch on/off.

Power

indicator light

Timer mode indicator

light (set only by

remote controller)

Up (+) and Down

(-) buttons

LED display

Shows the set temperature while on cool

mode. While on DRY and FAN modes, it

shows the room temperature.

Shows Error codes:

E1-Room temperature sensor error.

E2-Evaporator temperature sensor error.

E4-Display panel communication error.

Shows protection code:

P1-Bottom tray is full--Connect the drain

hose and drain the collected water away.

If protection repeats,call for service.

Note: When one of the above

malfunctions occurs, turn off the unit,

and check for any obstructions.

Restart the unit, if the malfunction is

still present, turn off the unit and

unplug the power cord. Contact the

manufacturer or its service agents or

a similar qualified person for service.

NOTE: On above modes, the unit

operates the auto fan speed

automatically. You can set fan

speed only by the remote controller

on COOL and FAN modes.

NOTE: The control is capable of

displaying temperature in degrees

Fahrenheit or degrees Celsius.

To convert from one to the other,

press and hold the Up and Down

buttons at the same time for 3

seconds.

This manual suits for next models

Table of contents

Languages:

Other Midea Air Conditioner manuals

Midea

Midea M2OC-18HRDN1-M User manual

Midea

Midea Blanc Pro Series User manual

Midea

Midea MDV-D28Q1/BN2 User manual

Midea

Midea MDV-V105W/DVN1 User manual

Midea

Midea MCA3U-12HRFN1-QRD0W User manual

Midea

Midea DLCERAA12AAJ User manual

Midea

Midea MW-07CM8C Repair manual

Midea

Midea MDV-D280W/SN2 User manual

Midea

Midea MS9A-05CR-QD0 User manual

Midea

Midea MS11M-09HRFN1-BW0W User manual

Midea

Midea Mini VRF Operating manual

Midea

Midea MPPD33H Repair manual

Midea

Midea Split Type Room Air Conditioner User manual

Midea

Midea MTA-18WN1 Operating manual

Midea

Midea MSY-09HRDN1-QC8 User manual

Midea

Midea MP12SVWBA3RCM User manual

Midea

Midea MUE-18HRFN1-QRDO User manual

Midea

Midea 9V SERIES User manual

Midea

Midea SUPER INVERTER MULTI MTBI-07HWFN1-Q User manual

Midea

Midea OASIS 3D Inverter Series 11MSFI-A1-1211 User manual

Midea

Midea MRCT-062CWN1-R(C) User manual

Midea

Midea MWH-07CM3X1 Repair manual

Midea

Midea MDV-D100W/S User manual

Midea

Midea Aqua Tempo Super II Series User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual