Microsoft Windows XP MCE/ Vista Compatible
Patent No: ZL 2005 2 0115609.X
ZL 2005 3 0120667.7
Keyboard:
Receiver:
USB interface
Dimension: 78 x 21.5 x 10 mm
Remote:
2.4GHz wireless with 8 channels, 360-degree navigation
Working range: 10 meters.
2-AA batteries. (alkali batteries use better)
Built-in optical trackball, mouse key
Trackball: 19mm Optical.
KEY: Including 45 hotkeys & 2 mouse keys & MCE keys.
Dimension: 178 x 50 x 32 mm
Page: Page:
2.4GHz wireless with 8 channels. 360-degree navigation.
Working range: 10 meters.
4-AA batteries. (alkali batteries use better)
Energy saving management.
86 Number of keys and 12 Internet/Multimedia hotkeys.
Built-in Optical trackball + 2 Mouse Buttons & Scroll Wheel.
Trackball: 25mm Optical.
Dimension: 385 x 178 x 50 mm.
1
Remote Control DescriptionKeyboard Description
Battery Low
Windows
CERTIFIEDFOR
TM
TM
Vista
User Manual
Model# HTPCKB
2
1. Turn on the Computer. 2. Plug the USB Receiver of the keyboard
unto the USB ports of your computer.
3. Open the battery cover on back of keyboard and Remote control,
place AA batteries inside the battery compartment. Close the
battery compartment cover.
4. Setting ID
Keyboard Setting:
Press ID button on the receiver, the LED is on flash which means
ID is searching. (Picture A)
Remote Setting:
Open the battery cover.
Press ID button on the receiver, the LED is on flash which means
ID is searching. (Picture A)
Press ID button on the back of remote, the LED on the
receiver is off which means setting is successful. (Picture B)
1. RF Signal LED on the receiver will flash when the keyboard or
remote is being used. (Picture A)
2. When Battery Low LED lights, it means the keyboard or Remote
requires changing batteries. (Picture B C)
Trouble Shooting:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
The user should not modify or change this equipment without written approval form
manufacture - NMEDIA SYSTEM INC.
Modification could void authority to use this equipment.
Push to open Push to open
a.
b.
c.
d.
Notice:
Important note:
If your keyboard or remote control can not work after installation, please
check followings:
The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements and
void user’s authority to operate the device.
Make sure you have connected the receiver correctly to the computer;
the receiver has been properly plugged onto computer’s USB port.
Make sure you have inserted AAbatteries each into keyboard and remote,
and they are compartment correctly. (4 pcs for keyboard,2 pcs for remote)
If without any interference, such as other computer peripherals, the
working distance (the distance between keyboard and the receiver) is about
10 meters.
If using more than two units and interfere occurred, please reset ID again.
b.
c.
Press Fn+ID Key button on the keyboard, the LED is off
which means setting is successful. (Picture B)
b.
(Picture A)
(Picture B)
(Picture B)
(Picture A)
HTPCKB is the wonderful combo set combing 2.4Ghz RF Keyboard and
MCE Remote Control together. Both Keyboard and Remote are built in
Optical Trackball for convenient use.
HTPCKB radio wireless keyboard is one of the best computer input devices in
the market today. It combines the convenience of radio frequency wireless
and the trackball with two button mouse key and scroll wheel.It combined
with MCE RF remote control as a combo set , there are no cables connected
to the keyboard & control,based on 2.4GHz radio frequency, 10-30 meters
effective working range and 360 degree navigation.
Installation
Page: 3
Page: 4
Page: 5
Page: 6
Receiver(A) Keyboard(B) Remote(C)
Page:7Page: 8Page: 9
The Federal Communication Commission Radio Frequency Interference Statement
includes the following paragraph:
The equipment has been tested and found to comply with the limits for a Class B Digital
Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radio frequency energy and, if not installed
and used in accordance with the instruction, may cause harmful interference to radio
communication.
However, there is no grantee that interference will not occur in a particular installation.
If this equipment dose cause harmful interference to radio or television reception,
which can determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Remarks
Keys Description
Specification
a.
a.
