2 System description
The RL906 is a compact two-way loudspeaker consequently optimised for usage as a near-eld
monitor. Either in an outside broadcasting van, on top of the meter bridge or in the home studio and
evenasanprecioushi-monitoritismorethanconvincing.
By Musikelectronic Geithain’s coaxial technology a directivity was realised, that is especially adjusted
to the requirements of near-eld monitoring, meaning small base widths and short listening
distances.Homogeneity,neutraltonequalityanddirectionaldenitionaremostwidelycompatibleto
the greater speakers from the RL series. This allows seamless working without familiarisation phases
along the whole audio production, regardless if it is in an outside broadcasting van, the cutting room
or in the great studio. The RL906 is barely greater than a controlling monitor, but it houses the
power capability of a full-valued studio monitor. The bass reproduction as well as the maximum level
meet the requirements of most challenges. In 5 channel applications, demanding a higher level in
the lowest frequency range, the RL906 is perfectly combined with our models from the Basis series
whereby it moves closer to the greater models.
The loudspeaker is equipped with a 13cm (5”) cone woofer and a coaxial arranged 25 mm (1”)
tweeter. Each is powered by a separate MOSFET-amplier with active crossover and electronic
overload protection. The amplier is situated in the back of the cabinet. The RL906 provides a
balanced XLR-type input with an adjustable input level. To compensate their placement, the speaker
features three controllers to continuously adjust the high- and low-frequency response and also the
frequencies around 300Hz. These controllers are attached to the cabinet’s backside. A two-coloured
LEDindicatesthestateoftheamplierandwarnsofclipping.
Avarietyofspecialstandsandracksisavailableasaccessories.Accordingxingelementshavebeen
integrated into the loudspeaker cabinet.
