Matelec FPC-11010 User manual

1P: 1800 281 282 |F: 1300 281 282 |E: info@matelecaustralia.com.au |W: www.matelecaustralia.com.au

QUICK START GUIDE

Low Level Pump Shut-Off Controller

Standard - FPC-11010

Introduction

MATelec Australia’s Low Level Pump Shut-Off Controller is designed to provided power supply to a pump, used to pump water from a

tank into a home or other application. Housed in a robust polycarbonate enclosure, the controller features status indicator lights, a

GPO for power supply to the pump and a 9006 Float Switch with quick plug connection.The controller shuts off power to the pump

when tank is empty, preventing the pump from running dry.

V1.1

Safety

This control panel has been designed and built for applications that are Commercial and/or Industrial in nature, operation,function

and location. If the control panel is to be used in Domestic/Residential applications, further consideration is required by the installer

to ensure its suitability. It is the responsibility of the installing electrician to ensure compliance with relevant standards.

• Prior to installation, ensure power supply is isolated.

• Electrical connection to the panel must be carried out in accordance with the following pages.

• Additions or modiﬁcations to the control panel are not permitted and will void warranty.

• The controller is not intended for use by children or inﬁrm persons without supervision.

• Repairs to the controller must only be carried out by a suitably qualiﬁed electrician.

This operation manual makes use of the following symbols to indicate warnings that must be paid speciﬁc attention to:

Damage to equipment or personal harm may occur if this instruction is not followed

Electrical risk (electrocution hazard) may occur if this instruction is not followed

POWER

TANK

EMPTY

Ball

Valve

Closed

Open

Low Level

Float Switch

Foot

Valve

Pump

240Vac

6Amp max

To House

Mains Water

2P: 1800 281 282 |F: 1300 281 282 |E: info@matelecaustralia.com.au |W: www.matelecaustralia.com.au

Warning: All electrical connections must be carried out by a suitably

qualiﬁed and registered electrician

Step 3 - Connections

Close and secure enclosure door, connect the power lead into RCD protected GPO and switch on mains power.The Low Level Pump

Shut-Off Controller is now set up and has begun operation.

Step 1 - Installation

• Use the supplied mounting brackets to install the control panel.

• Control panel enclosure must be mounted in a vertical position.

• Ensure mounting method does not compromise enclosure weatherproof rating.

• Ensure cables/conduits entering the panel have mechanical protection and that the penetrations are sealed and do not

compromise the weatherproof rating of the enclosure.

Front View Side View

Bottom

Mounting Frame/Wall

TopMounting Holes

Step 4 - Powerup

• Connect the ﬂoat switch to the quick plug socket on the underside of the panel.

• Connect the pump (6 Amp max) to the GPO on the underside of the panel.

Step 2 - Float Switch Installation

• Install the ﬂoat switch in the tank/pit using a suitable method.

• The included ﬂoat switch is wired to close on rise, so power to the pump will be shut off when the

ﬂoat switch opens. Ensure the ﬂoat is at the correct height in the tank/pit.

• Adjust the switching differential, if required, by moving the cable weight position relative to the ﬂoat

switch.

Table of contents

Other Matelec Controllers manuals

Matelec

Matelec FPC-30020-CON Instructions for use

Matelec

Matelec FPC-12720 User manual

Matelec

Matelec FPC-30040-CON Instructions for use

Matelec

Matelec FPC-30240 Instructions for use

Matelec

Matelec FPC-15007 Instructions for use

Matelec

Matelec FPC-30010 User manual

Matelec

Matelec FPC-15007-INT Instructions for use

Matelec

Matelec RPC-30030 Instructions for use

Matelec

Matelec FPC-15007-CON User manual

Matelec

Matelec FPC-30030 Instructions for use

Matelec

Matelec FPC-15205 Instructions for use

Matelec

Matelec FPC-30040 Instructions for use

Matelec

Matelec FPC-12725 Instructions for use

Matelec

Matelec FPC-32020 Instructions for use

Matelec

Matelec Hydrowhiz FPC-63X21 User manual

Matelec

Matelec FPC-30020 Instructions for use

Matelec

Matelec FPC-15207 Instructions for use

Matelec

Matelec FPC-30010 Instructions for use

Matelec

Matelec FPC-30220 Instructions for use

Matelec

Matelec FPC-30002 Instructions for use

Matelec

Matelec FPC-30000 Instructions for use

Matelec

Matelec FPC-12724 Instructions for use

Matelec

Matelec FPC-36040 Instructions for use

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual