Marshall Amplification EMBERTON II Setup guide

EMBERTON II – PORTABLE LOUDSPEAKER

FULL ONLINE MANUAL

003

BACK TO INDEX

EMBERTON II - FULL ONLINE MANUAL

DEVICE LAYOUT ENGLISH

004

BACK TO INDEX

EMBERTON II - FULL ONLINE MANUAL

The 10 segment Battery indicator shows the battery charge with a

steady light and a rising animation indicates charging.

Push and hold the Bluetooth®button until the LED turns to a slow red

pulse to start pairing mode.

Charge the speaker by plugging it into a USB power source.

Push and hold for 2 seconds to turn on/off.

Push once to play/pause.

Push right/left to skip forward/back.

Hold right/left to fast forward/rewind.

Hold upwards/downwards to adjust the volume.

II.

III.

IV.

BATTERY INDICATOR

BLUETOOTH BUTTON

USB-C POWER INPUT

CONTROL KNOB

GENERAL ENGLISH

005

BACK TO INDEX

EMBERTON II - FULL ONLINE MANUAL

INSTRUCTIONS ENGLISH

A factory reset will reset the speaker to its original settings, excluding

any ﬁrmware updates.

Note: This will delete all user settings and the speaker will need to be

set up again.

Ensure that the speaker is on.

Push and hold the Bluetooth button for 7 seconds. All indicators turn

o and the speaker restarts.

Remove EMBERTON II from your audio device’s Bluetooth list before

pairing again.

II.

III.

PERFORMING A FACTORY RESET

MARSHALL BLUETOOTH APP

Download the Marshall Bluetooth app to get the most out of your

speaker and keep it up to date with the latest software.

Push and hold the control knob until the speaker turns on.

Push and hold the Bluetooth button until the LED turns to a slow

red pulse.

Select EMBERTON II from your audio device’s Bluetooth list.

II.

III.

BLUETOOTH PAIRING

006

BACK TO INDEX

EMBERTON II - FULL ONLINE MANUAL

INSTRUCTIONS ENGLISH

CLEANING THE SPEAKER

Clean your speaker regularly to keep it fresh and last longer.

Unplug any leads before cleaning the speaker and make sure everything is

completely dry before plugging in any USB power source.

The silicone sleeve can be removed and cleaned separately. Use a

disinfectant wipe or a lint-free cloth, slightly damp with 70% isopropyl alcohol

or 75% ethyl alcohol to gently clean silicon parts. Dry them with a towel

before putting them back on the speaker.

Carefully clean the speaker mesh and openings with a dry and soft brush,

or a cotton swab.

• Do not use any sharp or metal objects.

• Do not use compressed air.

• Do not use products containing bleach or hydrogen peroxide.

• Do not submerge the speaker in any cleaning agents.

BATTERY CARE GUIDE

Your speaker comes equipped with a high-performance lithium-ion battery

and the life span is aected by charging and usage. Follow the guidelines

below to keep your battery in great condition for as long as possible.

• Avoid using fast chargers if possible. Fast charging causes stress

on the battery and will degrade it.

• Avoid charging the battery when it is already full or letting it drain

completely. Try keeping the charge between 30% and 80%.

• If the speaker is stored for a long time, do so with a half-charged

battery and in a cool, dark, and dry place.

• Do not use or charge the speaker in hot and unventilated places, 45°C/113°F

and above, such as in a parked car or by a window in direct sunlight.

• Avoid charging the battery at low temperatures, below 10°C/50°F and

using the speaker below 0°C/32°F.

• Avoid strong mechanical shocks such as dropping the speaker on hard

surfaces as it might damage the battery.

007

BACK TO INDEX

EMBERTON II - FULL ONLINE MANUAL

1 2

Double press the Bluetooth button on any speaker you want to add

to the session. The LED starts to blink until the speaker has joined a

session. While in a session, the speaker will disconnect from any

previously connected audio device and will try to reconnect after

leaving the session.

To remove a speaker from the session, double press the Bluetooth

button on that speaker.

Triple press the Bluetooth button to start or end a Stack session. The

LED starts to blink until any other speaker joins the session.

Connect two or more Emberton II speakers in a Stack session for a bigger

sound. Play anything on the main speaker and all speakers in the session

will play in sync. You can adjust the volume on any individual speaker for the

perfect balance.

ADDITIONAL SPEAKER

MAIN SPEAKER

STACK MODE ENGLISH

008

BACK TO INDEX

EMBERTON II - FULL ONLINE MANUAL

The speaker does

not turn on

Bluetooth

connection

drops out

Cannot play in

Stack mode

Cannot connect

or pair with a

Bluetooth device

PROBLEM CAUSE ACTION

The battery has

no charge.

The Bluetooth

devices are too

far apart, or the

connection is

affected due

to obstacles.

The playback device

is not connected to

the main speaker.

Bluetooth is not

enabled on your

device (phone

or computer).

The speaker is not

turned on.

Plug the speaker into

a USB power source

to charge it.

Move the devices

closer to each other

so that they are

unobstructed by

obstacles such as

walls or doors.

Make sure that your

playback device

(phone or computer)

is paired with the

main speaker.

Activate

Bluetooth on your

audio device.

Push and hold the

control knob for

2 seconds to turn

on the speaker

before setting it in

pairing mode.

TROUBLESHOOTING ENGLISH

009

BACK TO INDEX

EMBERTON II - FULL ONLINE MANUAL

Bluetooth

connection

drops out

There is a strong

electric ﬁeld

surrounding the

speaker. Items

such as microwave

ovens, wireless

network adapters,

ﬂuorescent lights

and gas cookers use

the same frequency

range as the

Bluetooth device. This

may lead to

electrical disturbances.

There is a

software error.

Move the speaker

to another spot or

turn o or move

the interfering

electronic device.

Perform a factory

reset by pressing the

Bluetooth button for

7 seconds.

The speaker needs to

be set up again.

Erratic behaviour The speaker is not

using the latest

firmware version.

Download the

Marshall Bluetooth

app and connect

to the speaker.

Follow the in-app

instructions to ensure

that the speaker

has the latest

firmware version.

TROUBLESHOOTING ENGLISH

PROBLEM ACTIONCAUSE

MARSHALLHEADPHONES.COM

Design of device and packaging are intellectual properties of Zound Industries International AB and Marshall

and “Marshall” trade dress are trademarks and intellectual property of Marshall Amplification Plc and may

not be used without permission. Permission granted to Zound Industries International AB. The Bluetooth®

wordmark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks

by Zound Industries International AB is under license. Google Play is a trademark of Google LLC. App Store

is a service mark of Apple Inc., registered in the U.S. and other countries. R 1.5

Other manuals for EMBERTON II

Table of contents

Other Marshall Amplification Speakers manuals

Marshall Amplification

Marshall Amplification WOBURN User manual

Marshall Amplification

Marshall Amplification Uxbridge User manual

Marshall Amplification

Marshall Amplification Uxbridge Voice with the Google Assistant User manual

Marshall Amplification

Marshall Amplification EMBERTON II Setup guide

Marshall Amplification

Marshall Amplification WOBURN II BLUETOOTH User manual

Marshall Amplification

Marshall Amplification ACTON II Bluetooth User manual

Marshall Amplification

Marshall Amplification Stockwell User manual

Marshall Amplification

Marshall Amplification WILLEN User manual

Marshall Amplification

Marshall Amplification WOBURN III User manual

Marshall Amplification

Marshall Amplification Modefour MF280 User manual

Marshall Amplification

Marshall Amplification MOTIF A.N.C. User manual

Marshall Amplification

Marshall Amplification WOBURN User manual

Marshall Amplification

Marshall Amplification WOBURN User manual

Marshall Amplification

Marshall Amplification DSL40CR User manual

Marshall Amplification

Marshall Amplification EMBERTON User manual

Marshall Amplification

Marshall Amplification EMBERTON II User manual

Marshall Amplification

Marshall Amplification STANMORE User manual

Marshall Amplification

Marshall Amplification STANMORE III Setup guide

Marshall Amplification

Marshall Amplification Kilburn II User manual

Marshall Amplification

Marshall Amplification Stanmore Multi-Room User manual

Marshall Amplification

Marshall Amplification KILBURN User manual

Marshall Amplification

Marshall Amplification EMBERTON II Setup guide

Marshall Amplification

Marshall Amplification Kilburn II User manual

Marshall Amplification

Marshall Amplification ACTON II Bluetooth User manual

Popular Speakers manuals by other brands

argon audio

argon audio IE20 quick start

Denon

Denon SC-N7 owner's manual

Gemline

Gemline Ace 3952 user manual

Focal

Focal ON WALL 300 User manua

HEADRUSH

HEADRUSH Maximus HRSP 5024 manual

SoundLogic

SoundLogic BCCS-6/6395 instruction manual

Peavey

Peavey DTH 218 Specification sheet

Avantree

Avantree Pluto Air user guide

Morel

Morel Integra Series INTEGRA OVATION 4 install guide

Oppo

Oppo SONICA quick start guide

Bose

Bose SoundLink Wireless Music System owner's guide

Rocksteady

Rocksteady Stadium owner's manual

Bowers & Wilkins

Bowers & Wilkins 4 owner's manual

Sonance

Sonance SONOS OUTDOOR Series installation manual

Electro-Voice

Electro-Voice EVID FM4.2 Brochure & specs

Pioneer

Pioneer XW-HTD630 manual

Onn

Onn BWA16AA002 Product guide

HP GL313AA - USB Speakers PC Multimedia quick start guide