Marsden MS-4200 User manual

MS-4200

MS-4201/MS-4202L/MS-4203

Baby/Baby&Teenager/Adult

Operation Manual

INTRODUCTION

Thank you for purchasing a Marsden Professional Medical Scale. This is a precision

Class III Weighing Instrument and it will reward considerate use with many years of

accurate weighing results

The MS-4100 and MS-4101 come complete with a plastic baby tray, plastic cover,

Aluminium base, and a large easy to read LCD display, the model MS-4102 is intended for

Adults only and no baby tray is supplied

User Keys –The MS-4100 has 3 function keys consisting of ON/ZERO/OFF, HOLD and

TARE

The MS-4101 and MS-4102 have 4 function keys consisting of 2 x ON/ZERO/OFF, HOLD

and TARE

USING THE SCALE

The scale is suitable for able body users only. The user should step directly on to the centre

of the scale to ensure safe use.

POWER SUPPLY & LOW BATTERY

1. The MS-4100, MS-4101 and MS-4102 scales can be run from six ‘AA’ alkaline batteries

or can be connected directly to the mains power supply using the included mains power

adaptor

2. (Low battery indication) will display on the scales LCD display when the battery

power is insufficient to power the scale

3. When is displayed, please replace the 6 alkaline batteries

SPECIFICATIONS

MODEL No

MS-4200

MS-4201

MS-4202L/4203

Capacity/Division

20 kg x 10 g

0~20kg x 10g

20~50kg x 20g

0~150kg x 50g

150~200 x 100G

Baby Tray

Yes

Units of Measure

Function keys

ON/ZERO/OFF, HOLD, TARE

Stabilisation Time

1-2 seconds

Operating Temp.

0°C - 40°C

Power supply

Six AA size alkaline batteries or Mains Adaptor

Indicator display

1.0” LCD display with 5 active digits

Dimensions

(w x d x h)

Base: 340 x 330 x 50 mm

Baby Tray: 585 x 280 x 120mm

POWER SUPPLY

The scales use six "AA" size Alkaline batteries for operating. The battery is contained in a

cavity inside the scale. Access is via a removable cover on the rear of the scale, as shown

below.

INSTALLING THE BATTERY

1. 2.

3. 4.

CONNECTING THE MAINS POWER SUPPLY

FUNCTION KEYS

On/e = 0.05 kg

Adult

Max 150kg

Min 1kg

Net

Adult

Max 150kg

Min 1kg

Tare On/

Hold Off

Zero/

Hold

Zero/Off

e = 0.05 kg

ON/ZERO/OFF

1. Press this key to power up the scale, the display will go to 0.00kg

2. MS-4101/MS4102 Pressing the Single ON/OFF/ZERO key on the opposite side of

the display will cause the scales display to reverse, therefore the display can be set

to be viewed by the patient or the operator

3. If the scale shows a figure other than 0.00kg with no weight applied then press the

ON/ZERO/OFF key once to Zero the display.

4. Press and Hold the ON/ZERO/OFF key to switch off the scale.

Note: The scale has a built in Battery save function that will switch off the scale after a period of

inactivity, usually around 5 minutes

HOLD

1. When weighing a patient press the Hold key once and the scale will ‘lock’ onto the

patients weight once a stable reading as been taken.

2. Press the Hold key again to release the display.

TARE

1. The Tare key can be used to Zero the weight of any unwanted item, example –

When weighing a baby it is normal for some paper towels or similar to be placed

MS-4101 and MS-4102 Only

onto the scale, press the Tare key once and the weight of the paper towels will be

zeroed off.

2. After weighing the baby, remove the paper towels and press Tare again to cancel the

tare value and return to Zero.

BMI

1. After the patient stands on the scale, press and hold the BMI key for 3 seconds.

2. The scale will enter Height entry mode.

3. Use the +/- keys to adjust the display to the patients height in centimeters.

4. Press the BMI key once and the patients BMI result will be shown on the display.

5. Press the BMI key once again to return to normal weighing mode.

ERROR MESSAGES

1. Low Battery

2. Over Load

3. High/Low Zero Count

4. Low Zero Count

This indicates that the scales load

sensor/s have been overloaded, re-

calibration may fix this problem but it

usually indicates a faulty load sensor

1) The scale is above its Zero Range,

remove any weight on the scales

and try to power on again. If the

scale still shows the error message

then it indicates a fault with the

scales electronics.

2) The scale is below its Zero range,

check there is nothing jammed

underneath the scale and try to power

on again, if the scale still shows the

error then it indicates a fault with the

scales electronics

The scales alkaline AA type batteries

are flat.

Replace the batteries with new ones

This manual suits for next models

Table of contents

Popular Scale manuals by other brands

AWS

AWS ZEO-50 user manual

Gima

Gima Glass Body Fat Analyzer Use and maintenance book

Seca

Seca 374 user manual

TEC

TEC TEC SL59 SERIES owner's manual

Axis

Axis B/E Series user manual

Alecto

Alecto ACW-40 user manual

Rice Lake

Rice Lake MSI-4260 IS Technical manual

IKA

IKA RCT basic safety control operating instructions

ADE

ADE M20011 operating manual

Duronic

Duronic KS3000 manual

Digi

Digi SM-720 Service manual

Cardinal

Cardinal CS Series Operation manual

Korona

Korona Kastella Instructions for use

A&D

A&D FC-50Ki instruction manual

BDA

BDA CAMARGUE installation guide

Tanita

Tanita HD-357 Instructions for use

Leifheit

Leifheit 03173 quick start guide

Lumme

Lumme LU-1340 user manual

marsden MS-4200 User manual

Popular Scale manuals by other brands