Marsden MPPS-250 User manual

MPPS-250

USER MANUAL

PLEASE TAKE THE TIME TO READ THESE INSTRUCTIONS BEFORE

STARTING TO USE THE SCALES

TABLE OF CONTENTS

POWER SUPPLY…….…………………………………. 2

SPECIFICATIONS…………………………………………. 2

MAINATENANCE AND GENERAL CARE……………... 3

1.0 BASIC FUNCTIONS………………………………… 4

1.1 SWITCHING ON …………………………………….. 4

1.2 SWITCHING OFF……………………………………. 5

1.3 SETTING ZERO……………………………………… 5

2.0 ADVANCED FUNCTIONS ……………………… 6

2.1 HOLD FUNCTION ……………………………….. 6

2.2 BODY MASS INDEX (BMI) FUNCTION……….. 7

2.3 SETTING THE DATE AND TIME………………. 8

2.4 PRINTING FUNCTION…………………………. 9

2.5 ASSEMBLING INSTRUCTIONS………………… 10

2.6 USING & ASSEMBLING(HM200D)……………... 11

2.7 USING & ASSEMBLING(HM200M).……………. 13

ROHS COMPLIANCE………………………………………. 14

ERROR MESSAGES……………………………………... 15

CONTACT DETAILS ………..……………………………… 16

POWER SUPPLY

The INDICATOR uses a rechargeable battery pack, or an AC adaptor.

When the indicator displays (low battery indication), please

plug in the AC adaptor for operation and battery recharging (where

rechargeable batteries are installed).

PRODUCT SPECIFICATION

MODEL

MARSDEN MPPS-250

ACCURACY CLASS

CLASS III

CAPACITY

150/250kg

INCREMENT

50/100g

BATTERY TYPE

7.2V 2000mAh

MAINS ADAPTOR

12V 2A

UNIT WEIGHT

8.3 kg

MAINTENANCE AND GENERAL CARE

Repairs and Servicing should only be carried out by authorised service

agents.

There are no user serviceable parts in the weighing scale itself.

The mains power adaptor fuses that are not accessible.

When the adaptor is plugged into the mains supply a Green LED should

illuminate to indicate that the adaptor is functioning correctly. If the LED

does not illuminate then the scale should be checked by competent

personnel.

The weight indicator contains an internal rechargeable battery pack; this

should only be replaced by authorised service agents. Under normal

operating conditions the batteries should last for several years.

We would recommend using alcohol based wipes or similar when

cleaning the scales.

Please do not use large amounts of water when cleaning the scales as

this will cause damage to the scales electronics, you should also refrain

from using corrosive liquids or high pressure washers.

Always disconnect the scales from the mains power supply before

cleaning.

OPERATOR

INSTRUCTIONS

SECTION

BASIC

FUNCTIONS

1.1 SWITCHING ON THE SCALE

Press the ON button firmly.

The scale will first test all of the

display segments.

The scale will now show its current

software version number.

The scale will now go into weighing

mode and should show 0.0kg on the

display.

1.2 SWITCHING OFF THE SCALE

Press the OFF button.

The scale will power down.

1.3 SETTING THE SCALE TO ZERO

If for some reason the scale shows a

reading other than 0.0kg then it can be

reset to zero (2% of capacity).

Press the zero key once.

The scale will return to 0.0kg.

SECTION 2 –ADVANCED FUNCTIONS

2.1 HOLD FUNCTION

Press the HOLD button once.

The person should now get on to the

scales.

After a few seconds the scale will lock on

the person’s weight, the person can now

stand off the scale and the weight will

remain.

Press HOLD again to unlock the weight

and return to 0.0kg

2.2 BMI (BODY MASS INDEX) FUNCTION

For

this

example

will

assume

have

person

weighing

60kg

who is

170.0cm

tall.

In normal mode, press BMI key to enter

into BMI mode.

The display will show the last height

entered and the extreme left digit will

flash. Enter the height by using the

numeric key pad (e.g. 170.0cm). There

will always be an active flashing digit in

the height display (unless the HOLD key is

pressed).

Proceed to weigh as normal. The

instrument will show the weight, height,

and BMI value.

At this time, the weight and height can be

freely changed, and the BMI value will be

automatically calculated according to the

changed weight and height.

Stand on the scale for 5 seconds. Press the HOLD key to lock the weight, height, and

BMI value. Press the HOLD key again to disable the display locking function.

Press the BMI button to return normal

mode and the person can now be taken

off the scale.

2.3 SETTING THE DATE AND TIME

Press the HOLD key for 3 seconds to access the time setting mode. The time

period digit that is flashing can be changed by entering the appropriate

number from the numeric key pad. The time period to be edited is selected

by pressing the HOLD key.

E.g. To input 25 December 2008, 8:00 a.m.:

Enter the year. Press HOLD to

confirm and access the date editing

field.

Enter the date. E.g. “12.25” for

December 25th. Press HOLD to

confirm and access the time clock

editing field.

Enter the time (24 hour clock only).

Press Hold and the display shows:

YYYY→MM.DD→HH:SS

2.4 PRINTING FUNCTION

An optional Marsden external printer (Model TP-2100) is available for all models.

When the printeris fitted the patient’s weight, height, and BMI result can be

printed on to a paper roll.

Once the person has been weighed and their BMI calculated, simply press the

print key to produce the following ticket:

GROSS WEIGHT 60.00kg

TARE WEIGHT 30.00kg

NET WEIGHT 30.00kg

PATIENT HEIGHT 100.0cm

PATIENT B.M.I 37. 5

29/12/2008 17:00

Other manuals for MPPS-250

Table of contents

Popular Scale manuals by other brands

AWS

AWS ZEO-50 user manual

Gima

Gima Glass Body Fat Analyzer Use and maintenance book

Seca

Seca 374 user manual

TEC

TEC TEC SL59 SERIES owner's manual

Axis

Axis B/E Series user manual

Alecto

Alecto ACW-40 user manual

Rice Lake

Rice Lake MSI-4260 IS Technical manual

IKA

IKA RCT basic safety control operating instructions

ADE

ADE M20011 operating manual

Duronic

Duronic KS3000 manual

Digi

Digi SM-720 Service manual

Cardinal

Cardinal CS Series Operation manual

Korona

Korona Kastella Instructions for use

A&D

A&D FC-50Ki instruction manual

BDA

BDA CAMARGUE installation guide

Tanita

Tanita HD-357 Instructions for use

Leifheit

Leifheit 03173 quick start guide

Lumme

Lumme LU-1340 user manual

marsden MPPS-250 User manual

Popular Scale manuals by other brands