Marmitek boomboom 160 User manual
O
OMBOO
M
20582/20131112 • BOOMBOOM 160TM
© ALL RIGHTS RESERVED MARMITEK ®
USER MANUAL 3
GEBRAUCHSANLEITUNG
GUIDE UTILISATEUR
MODO DE EMPLEO
MANUALE D’ISTRUZIONI
GEBRUIKSAANWIJZING
BOOMBOOM 160
19
27
35
11
43
© MARMITEK
2
BoomBoom 160
3
ENGLISH
SAFETY WARNINGS
xTo prevent short circuits, this product should only be used
inside and only in dry spaces. Do not expose the
components to rain or moisture. Do not use the product close
to a bath, swimming pool etc.
xDo not expose the components of your system to extremely
high temperatures or bright light sources.
xIn case of improper usage or if you have altered and repaired
the product yourself, all guarantees expire. Marmitek does
not accept responsibility in the case of improper usage of the
product or when the product is used for purposes other than
specified. Marmitek does not accept responsibility for
additional damage other than that covered by the legal
product responsibility.
xThis product is not a toy. Keep out of reach of children.
xDo not open the product: the device may contain live parts.
The product should only be repaired or serviced by a
qualified expert.
xThe built-in rechargeable battery is not replaceable. Do not
remove or replace battery. Dispose of unit properly. Do not
dispose unit in trash or fire.
© MARMITEK
4
TABLE OF CONTENTS
SAFETY WARNINGS ....................................................................3
TABLE OF CONTENTS.................................................................4
INTRODUCTION ...........................................................................5
SET CONTENTS ...........................................................................5
FIRST USE ....................................................................................5
INITIAL SETUP VIA BLUETOOTH................................................6
VOLUME CONTROL .....................................................................7
TURNING OFF ..............................................................................7
TURNING ON ................................................................................7
STANDBY......................................................................................8
CONNECTING WITH AN AUDIO CABLE .....................................8
BATTERY LIFE AND STANDBY TIME..........................................8
BATTERY ALMOST EMPTY .........................................................8
FREQUENTLY ASKED QUESTIONS ...........................................9
TECHNICAL DATA......................................................................10
BoomBoom 160
5
ENGLISH
INTRODUCTION
Congratulations on your purchase of the Marmitek BoomBoom
160. This Bluetooth speaker allows you to play music from a
sound source that is equipped with Bluetooth technology without
having to connect the source using cables. This could involve a
PC or a laptop with a Bluetooth USB dongle, a mobile phone that
supports Bluetooth, an Android phone, an Android Tablet, an
iPhone an iPad or a Mac.
The BoomBoom 160 has a range of about 10 metres, allowing you
to organise your music in the same room or in an adjoining room.
SET CONTENTS
1 x BoomBoom 160, universal Bluetooth wireless stereo speaker
1 x micro USB cable
1 x Mini Jack to Mini Jack converter cable
1 x set of instructions in English, German, French, Spanish,
Italian, Dutch.
FIRST USE
The BoomBoom 160 has a built-in rechargeable battery.
We recommend completely charging the battery before using the
device for the first time. Connect the supplied USB cable to the
BoomBoom 160 and a PC, Mac or USB power adapter. The red
LED light comes on.
The device may take up to about 3 hours to charge for the first
time. When the BoomBoom 160's battery is fully charged, the LED
light turns blue.
© MARMITEK
6
INITIAL SETUP VIA BLUETOOTH
1. Switch on the
BoomBoom 160
by lightly pressing
down on the
control panel. The
top now rises.
2. Wait for
approximately 10
seconds. The
speaker will go
into pairing mode and will produce a “beep” tone. The red
and blue lights will light up alternately.
3. Turn on a device that supports Bluetooth, such as an iPod,
iPhone, Android or mp3 device and go to: Settings > General
> Bluetooth. Click ON the Bluetooth. BoomBoom 160 will
then appear on the device. Click ON the BoomBoom 160.
The device is now connected and paired with the speaker. If
the device prompts for a pair code, enter:”0000”
4. If pairing is not successful within 150 seconds, the
BoomBoom 160 will go into standby and the blue LED will
light up. To restart the pairing process, switch off the speaker
by pushing down the control panel and repeat step 1. If the
initial setup connection is successful, the next time the
speaker is turned on, the speaker will automatically pair to
the last device it was connected with.
! You can link to up to 8 devices however only 1 device can be
connected to the BoomBoom 160 at one time.
BoomBoom 160
7
ENGLISH
VOLUME CONTROL
1. Tap VOLUME+(4) for 1 second
increments to increase the volume.
When maximum volume has been
reached, a tone indicator will
sound.
2. Tap VOLUME-(5) for 1 second
increments to decrease the volume.
When minimal volume has been
reached, a tone indicator will sound.
3. Tap PLAY/PAUSE (3) to pause the music or to continue play.
(NOTE:THIS FEATURE MAY NOT WORK WITH SOME BLUETOOTH
DEVICES)
4.
TURNING OFF
Switch on the BoomBoom 160 by lightly pressing down on the
control panel again. The illuminated LED will now switch off.
TURNING ON
Switch the BoomBoom 160 on by lightly pressing down on the
control panel. The top now rises.
The BoomBoom 160 will then automatically link to the last device
it was connected to. When connected, the blue LED lights go on.
Only 1 device can be connected at once with the BoomBoom 160.
If your device does not connect automatically, go to the device's
Bluetooth settings and select the BoomBoom 160. A connection
will then be made.
Turn off the BoomBoom 160 in order to pair the device with
another Bluetooth device.
© MARMITEK
8
STANDBY
If the BoomBoom 160 is in connection mode and no connection is
made within 3 minutes, the BoomBoom 160 switches to standby
mode (blue LED lighting is lit).
CONNECTING WITH AN AUDIO CABLE
The Bluetooth
connection can be
switched to a wired
connection by
plugging in the
3.5mm audio jack.
The volume key
function will be
disabled in the wired
connection mode. Simply unplug the 3.5mm audio jack to revert
back to the Bluetooth connection.
BATTERY LIFE AND STANDBY TIME
Once the battery has been fully charged it will last for about 4
hours via Bluetooth, or 5-6 hours via audio cable. You can also
power the BoomBoom 160 with the micro USB cable connected to
a PC, Mac or USB power adapter. The battery then remains
charged.
BATTERY ALMOST EMPTY
When the BoomBoom 160’s battery is almost empty, the
Bluetooth connection will terminate. Follow the steps given earlier
to charge the battery.
BoomBoom 160
9
ENGLISH
FREQUENTLY ASKED QUESTIONS
I can’t connect my BoomBoom 160.
Check the following:
1. Ensure that the power adapter is connected and/or that the
battery is fully charged.
2. Ensure that the Bluetooth function on your mobile telephone
is on (check your phone's manual for reference).
3. Ensure that the distance between your mobile phone and the
BoomBoom 160 is no greater than 10 metres and that there
are no large obstacles in the way.
Can I link numerous devices to my BoomBoom 160?
You can link up to 8 devices to your BoomBoom 160. If the
BoomBoom 160 is switched on, it will automatically connect to the
last connected device.
Do you have other questions that have not been resolved by the
above information? Please go to www.marmitek.com
Environmental Information for Customers in the European
Union
European Directive 2002/96/EC requires that the equipment
bearing this symbol on the product and/or its packaging must
not be disposed of with unsorted municipal waste. The symbol
indicates that this product should be disposed of separately
from regular household waste streams. It is your responsibility to dispose of
this and other electric and electronic equipment via designated collection
facilities appointed by the government or local authorities. Correct disposal
and recycling will help prevent potential negative consequences to the
environment and human health. For more detailed information about the
disposal of your old equipment, please contact your local authorities, waste
disposal service, or the shop where you purchased the product.
© MARMITEK
10
TECHNICAL DATA
Bluetooth Frequency 2.402-2.480GHz
Bluetooth version V2.1+EDR, class II
Support multiple pair up to 8 devices
Output power 2.5W max
Signal To Noise Ratio >88dB
Frequency Response 20Hz-20kHz
Distortion <10%
Battery Li-ion 3.7v,
- Battery Capacity 500mAh
- Battery Charging Voltage 5V
- Charger Time 3-4 hours max
- Battery Life 5 hours
audio input DC3.5 female
Driver Unit 40mm, 4 Ohm ,2.5W
Power Indicator Light Blue lights
Range Up to 10 metres open field
Product weight 0.205kg
Product dimension 70x70x90mm
Operation temperature -10°C ~ +55°C
Storage temperature -20°C ~ +60°C
Specifications may be modified without prior notice.
Table of contents
Languages:
Other Marmitek Speakers manuals
Marmitek
Marmitek BoomBoom 260 User manual
Marmitek
Marmitek SPEAKER ANYWHERE 350 User manual
Marmitek
Marmitek SPEAKER ANYWHERE 352 User manual
Marmitek
Marmitek 20576/20140401 User manual
Marmitek
Marmitek Speaker Anywhere 650 User manual
Marmitek
Marmitek BOOMBOOM 250 User manual
Marmitek
Marmitek BoomBoom 230 User manual
Marmitek
Marmitek BoomBoom 380 User manual
Marmitek
Marmitek SPEAKER ANYWHERE 400 User manual
