Maniway MW-1306 User manual
B
BR
RA
AN
ND
D
P
Po
or
rt
ta
ab
bl
le
e
B
Bl
lu
ue
et
to
oo
ot
th
h
S
Sp
pe
ea
ak
ke
er
r
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
Model No. :MW-1306
1
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed
and manufactured to ensure your personal safety. However,
improper use can result in potential electrical shock or fire
hazards. Please read all safety and operating instructions
carefully before installation and use, and keep these instructions
handy for future reference. Take special note of all warnings
listed in these instructions and on the unit.
Water and Moisture
The unit should not be used near water or wet space . Such as
bathtub, washbowl, kitchen sink, laundry tub, swimming pool or
basement.
Ventilation
The unit should be situated in the location or position which
places won’t interfere its proper ventilation. For example, it
should not be situated on a bed, sofa, rug or similar surface that
may block the ventilation openings. Also, it should not be placed
in a built-in installation, such as a bookcase or cabinet, which
may impede the flow of air through the ventilation openings.
Heat
The unit should be situated away from heat sources such as
radiators, heat registers, stoves or other appliances (including
amplifiers) that produce heat.
Power Charger
The unit should be connected to a power charger(not included)
only of the type described in the operating instructions or as
marked on the appliance.
2
Cleaning
The unit should be cleaned only as recommended. See the
section « Care and Maintenance » of this manual for cleaning
instructions.
Object and Liquid Entry Care should be taken so that objects do
not fall and liquids are not spilled into any openings or vents
located on the product.
Damage Requiring Service
This unit should be serviced by qualified service personnel
when:
Objects have fallen into or liquid has been spilled into the
enclosure.
The unit has been exposed to rain.
The unit has been dropped or the enclosure damaged.
The unit exhibits a marked change in performance or does not
operate normally.
Periods of Nonuse
If the unit is to be left unused for an intended period of time, such
as a week or longer, the power cord should be unplugged from
the unit to prevent damage or corrosion.
Servicing
The user should not attempt to service the unit beyond those
methods described in the user’s operating instructions.
Service methods not covered in the operating instructions
should be referred to qualified service personnel.
3
CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING:
Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be
exposed to dripping or splashing and that objects filled with
liquids, such as vases, shall not be placed on apparatus.
CARE AND MAINTENANCE
Do not subject the unit to excessive force, shock, dust or
extreme temperature.
Do not tamper the internal components of the unit.
Clean the unit with a damp (never wet) cloth except metal
contact or speaker grille, Solvent or detergent should never
be used.
Avoid leaving your unit in hot, humid or dusty places.
Keep your unit away from heating appliances and sources of
electrical noise such as fluorescent lamps or motors.
Always keep your finger dry and clear before touching all the
buttons.
Do not dispose of batteries in fire, batteries may explode or
leak.
4
LOCATION OF CONTROLS
Top View
1. -Button
Press this button to adjust volume level down.
2. + Button
zPress this button to adjust volume level up
3. Button(for USB only)
zPress this button once to return to the beginning of current
track or previous track.
4. Button(for USB only)
5
z·Press this button once to to advance to the next track .
5. Power On/Standby Button
6. Battery charging Indicator (Red color)
zRapid flashing =low battery
While charging :
zFlashing =charging
zSteady Red= full charged
Operating mode indicator (Blue/Green/Cyan)
Blue color =Bluetooth mode
Green=Aux-in mode
Green=USB mode
7. Built-in Microphone
8. Button
zWhile unit is in Bluetooth or TF card Playback mode, press
once to play or pause the current track.
zIn Bluetooth mode, when receiving an incoming call on
your cell phone, tap this button once to answer the phone,
press this button again or press and hold this button to end
the call or ignore the incoming call.
9. Mini USB Charging jack
10. Aux-In Jack
11. USB port
BATTERY CHARGING INSTRUCTION
This unit operates on a built-in Li-ion battery that can be
recharged either using the USB port on your computer or from a
6
USB power adaptor (not included) with a rated output of DC 5V
500mA and up.
Note: The mini USB CHARGING JACK located on this unit is
only designed for charging the built-in Li-ion battery.
CHARGING THE BATTERY FOR FIRST TIME
1.) Charge the built-in Li-ion battery a minimum of 4 hours prior
to first use.
Plug the unit into the USB port on your computer or into a USB
power adaptor (not included) using the included USB cable.
2.) The battery charging indicator flashes while charging and it
stops flashing when the unit is fully charged.
Unplug the USB cable from the power source once the battery is
fully charged.
RECHARGING THE INTERNAL BATTERY
After prolonged use, the internal battery will become weak and
the operation may become intermittent. When the internal
battery capacity is very low, the battery Indicator will rapidly
flash in red to alert you to recharge the internal battery as soon
as possible.
Plug the speaker into a USB port on your computer by using the
included USB cable or into a DC 5V, 500mA and up USB power
adaptor (not included). Disconnect the USB cable from the
speaker as soon as it is fully charged.
Notes:
7
1.Charging time will vary if you are listening to music while
charging the internal battery. We recommend you switch off
the speaker power during the charging process.
2. To prolong the life of a rechargeable battery, it is
recommended to completely discharge it before fully charging
it again .
3.Rechargeable batteries need to be cycled for maximum
performance and longer battery life. If you don't use the player
that often, be sure to recharge the battery at least once a
month in order to keep the internal battery working properly.
Battery Note and Care
Do not burn or bury batteries.
Do not puncture or crush.
Do not disassemble.
Li-ion batteries must be recycled. Do not dispose of in the trash.
Use only chargers rated for Li-ion cells. Be sure the charger's
voltage and current settings are correct for the battery pack
being charged.
Charge batteries on a fireproof surface and away from
flammable items or liquids. Batteries should NEVER be left
unattended while charging. Only adults should charge the
batteries.
Follow the manufacturer's instructions for charging the product
and do not charge longer than recommended. Unplug the
charger when the battery is charged or not in use.
8
Note: The speaker is not magnetically shielded and may cause
color distortion on the screen of some TVs or video monitors. To
avoid this, you may need to move the unit further away from the
TV or monitor if an unnatural color shifts or image distortion
occurs.
TURN THE SPEAKER POWER ON/OFF
1.Slide the Power ON/OFF selector on the bottom of the unit to
ON position (where the orange round mark on the selector
can not been seen),a voice prompt “Power on” and a beep
sound is heard in 2-3 seconds. Meanwhile, the Operating
mode indicator will flash in blue.
2.To turn the unit off, slide the Power ON/OFF switch to OFF
position (where the orange round mark on the selector can
been seen).
OPERATING THE SPEAKER IN BLUETOOTH MODE
Bluetooth involves a technology for wireless radio connection of
devices over a short distance. Devices with Bluetooth standard
are transmitting between 2.402 and 2.480 GHz in the ISM band
(Industrial, Scientific and Medical). Interference can be caused,
for example by WLAN-networks, DAB radios, cordless phones,
or microwave ovens which work on the
same frequency band.
zThis speaker offers you the possibility to use a Bluetooth
enabled device. The functional radius is limited to approx.10
metres depending on the surroundings and the unit used.
9
zIf your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred
between the playing device (source) and the receiving
device.
zDue to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Pairing (Linking) A Bluetooth Enabled Cell Phone Or Other
Bluetooth Enabled Device To The Speaker
If the speaker has never been paired with a Bluetooth device
before . You need to follow the pairing instructions below to link
the speaker with your Bluetooth device .
1. When the speaker turned on, the Operating mode Indicator
flashes in blue . The speaker is ready to pair (link) with your
Bluetooth device .
2. Activate Bluetooth on the compatible device, and set it to
search for compatible devices.
3. Select the speaker name:”1308” from the list of found
devices.
Tips: Only one playback unit can be connected to the speaker.
If the speaker is already connected to another playback unit, the
speaker will not appear in the BT selection list.
Table of contents
Other Maniway Speakers manuals
