M-system 61A User manual

BEFORE USE ....

Thank you for choosing M-System. Before use, please check

contents of the package you received as outlined below.

If you have any problems or questions with the product,

please contact M-System’s Sales Ofﬁce or representatives.

■PACKAGE INCLUDES:

Analog I/O module ..............................................................(1)

■MODEL NO.

Conﬁrm Model No. marking on the product to be exactly

what you ordered.

■INSTRUCTION MANUAL

This manual describes necessary points of caution when

you use this product, including installation, connection and

basic maintenance procedures.

POINTS OF CAUTION

■POWER INPUT RATING & OPERATIONAL RANGE

• Locate the power input rating marked on the product and

conﬁrm its operational range as indicated below:

85 – 132V AC rating: 85 – 132V, 47 – 66 Hz, approx. 4VA

24V DC rating: 24V ±10%, approx. 4W, approx. 160mA

■GENERAL PRECAUTIONS

• Before you remove the unit or mount it, turn off the power

supply, input signal and output signal for safety.

■ENVIRONMENT

• Indoor use.

• When heavy dust or metal particles are present in the

air, install the unit inside proper housing with sufﬁcient

ventilation.

• Do not install the unit where it is subjected to continuous

vibration. Do not subject the unit to physical impact.

• Environmental temperature must be within -5 to +55°C

(23 to 131°F) with relative humidity within 30 to 90% RH

in order to ensure adequate life span and operation.

■WIRING

• Do not install cables close to noise sources (relay drive

cable, high frequency line, etc.).

• Do not bind these cables together with those in which

noises are present. Do not install them in the same duct.

■AND ....

• The unit is designed to function as soon as power is sup-

plied, however, a warm up for 10 minutes is required for

satisfying complete performance described in the data

sheet.

INSTALLATION

Use the Installation Base (model: MxBS2).

ANALOG I/O MODULE

(conforms to AnyWire wiring saving system) MODEL 61A

5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN

Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp

EM-6639 Rev.2 P. 1 / 3

INSTRUCTION MANUAL

COMPONENT IDENTIFICATION

Body

Specifications

■FRONT PANEL CONFIGURATION

PWR

RDY

LINK

NAME FUNCTIONS

AModular jack for

factory calibration Used only for factory calibration.

BPower indicator

LED

MARKING (color) FUNCTIONS

PWR (green) ON: Powered

OFF: No power

PWR (orange) ON: Memory failure

OFF: Normal

CStatus indicator

LED

MARKING (color) FUNCTIONS

RDY (red)

LINK (red)

ON at normal operating

Blinking at normal operating

DTransmission

setting

Station No. DIP SWITCH

124816 32

0 OFF OFF OFF OFF OFF OFF

1 ON OFF OFF OFF OFF OFF

2 OFF ON OFF OFF OFF OFF

::::::

3E OFF ON ON ON ON ON

3F ON ON ON ON ON ON

TRANSMISSION

CLOCK

DIP SWITCH

D E

7.8 kHz OFF OFF

15.6 kHz OFF OFF

31.3 kHz ON OFF

62.5 kHz ON ON

Euro type connec-

tor terminal for

AnyWire

For AnyWire wiring

61A

5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN

Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp

EM-6639 Rev.2 P. 2 / 3

TERMINAL CONNECTIONS

Connect the unit as in the diagram below.

■EXTERNAL DIMENSIONS unit: mm (inch)

50 (1.97) 103 (4.06)38 min.

(1.50)

(.47)

80 (3.15)

100 (3.94)

2–M3 SCREWS

■CONNECTION DIAGRAM

Modular Jack

for Factory

Calibration

MODULAR JACK

I/O & POWER CONNECTOR

Installation

Base

−

To Other

AnyWire

Devices

*Refer to the manual of the AnyWire device to be connected

for explanations how to connect the device.

WIRING INSTRUCTIONS

■EURO TYPE CONNECTOR TERMINAL (AnyWire)

Applicable wire size: 0.2 to 2.5 mm2(AWG24 to 12)

Stripped length: 7 mm

LIGHTNING SURGE PROTECTION

M-System offers a series of lightning surge protectors for

protection against induced lightning surges. Please contact

M-System to choose appropriate models.

61A

5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN

Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp

EM-6639 Rev.2 P. 3 / 3

Other M-system Control Unit manuals

M-system

M-system R5T-DA4 User manual

M-system

M-system TR3EX User manual

M-system

M-system R7G4HH-A-YVF4 User manual

M-system

M-system MECHATROLINK R7K4FML3-6-DAC32B User manual

M-system

M-system R7D-EA8 User manual

M-system

M-system R3-PD16 User manual

M-system

M-system Mini-M M2ADS User manual

M-system

M-system R7M-YV2 User manual

M-system

M-system R7M-RS4 User manual

M-system

M-system R7M-CT4E User manual

M-system

M-system R7C-EC8C User manual

M-system

M-system R3-PA4A User manual

M-system

M-system R1D-GH2 User manual

M-system

M-system R7D-DA16 User manual

M-system

M-system R3-NC3 User manual

M-system

M-system M6SXF3 User manual

M-system

M-system R3-GC1 User manual

M-system

M-system R6-NP1 User manual

M-system

M-system R7C-EC8A User manual

M-system

M-system R80FST4NJ User manual

M-system

M-system R3Y-SS8 User manual

M-system

M-system R3-NMW1F User manual

M-system

M-system Devicenet R7F4HD-DAC32D User manual

M-system

M-system R3-GM1 User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual