M-system R3Y-PA16 User manual

R3Y-PA16

P. 1 / 2 EM-8962 Rev.1

BEFORE USE ....

Thank you for choosing M-System. Before use, please check

the contents of the package you received as outlined below.

If you have any problems or questions with the product,

please contact M-System’s Sales Office or representatives.

■ PACKAGE INCLUDES:

Totalized pulse input module ..................................... (1)

■ MODEL NO.

Check that model No. described on the specification label is

exactly what you ordered.

■ INSTRUCTION MANUAL

This manual describes necessary points of caution when you

use this product, including installation, connection and basic

maintenance procedures.

POINTS OF CAUTION

■ CONFORMITY WITH EC DIRECTIVES

• The equipment must be mounted inside the instrument

panel of a metal enclosure.

• The actual installation environments such as panel con-

figurations, connected devices and connected wires may

affect the protection level of this unit when it is integrated in

a panel system. The user may have to review the CE

requirements in regard to the whole system and employ

additional protective measures to ensure CE conformity.

■ HOT INSERTION/REMOVAL OF MODULES

Removing or replacing modules does not affect other modules

on the same backplane. It is possible to replace them without

removing the power supply. However, replacing multiple

modules at once may greatly change line voltage levels. We

recommend that you replace them one by one.

■ ENVIRONMENT

• Indoor use

• When heavy dust or metal particles are present in the air,

install the unit inside proper housing with sufficient ventila-

tion.

• Do not install the unit where it is subjected to continuous

vibration. Do not subject the unit to physical impact.

• Environmental temperature must be within -10 to +55°C

(14 to 131°F) with relative humidity within 30 to 90% RH in

order to ensure adequate life span and operation.

■ WIRING

• Do not install cables (power supply, input and output) close

to noise sources (relay drive cable, high frequency line, etc.).

• Do not bind these cables together with those in which noises

are present. Do not install them in the same duct.

■ AND ....

• The unit is designed to function as soon as power is

supplied, however, a warm up for 10 minutes is required for

satisfying complete performance described in the data sheet.

INSTRUCTION MANUAL

MODEL R3Y-PA16

TOTALIZED PULSE INPUT MODULE

(Pi 16 points)

COMPONENT IDENTIFICATION

INSTALLATION

Use the Installation Base (model: R3-BSx).

20 A

RUN LED

ERR LED Status Indicator LED

Input Connector

■FRONT VIEW

• Pin Assignment

■SIDE VIEW

SW3

1Count

Reset

Set the Count Reset SW to OFF to start counting.

■STATUS INDICATOR LED

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

ERR indicator: Bi-color (red/green) LED;

Red with the excitation abnormality;

Green in normal operating conditions.

Input status indicator: Red LED; turns on with the inputs

supplied.

R3Y-PA16

P. 2 / 2 EM-8962 Rev.1

■ CONNECTION DIAGRAM

TERMINAL CONNECTIONS

Connect the unit as in the diagram below.

■ DIMENSIONS mm (inch) ■ INPUT CONNECTOR (40-pin)

M-SYSTEM WARRANTY

M-System warrants such new M-System product which it manufactures to be free from defects in materials and workmanship during the 36-month period following the date that such

productwasoriginallypurchasedifsuchproducthasbeenusedundernormaloperatingconditionsandproperlymaintained,M-System'ssoleliability,andpurchaser'sexclusiveremedies,

under this warranty are, at M-System's option, the repair, replacement or refund of the purchase price of any M-System product which is defective under the terms of this warranty. To

submit a claim under this warranty, the purchaser must return, at its expense, the defective M-System product to the below address together with a copy of its original sales invoice.

THIS IS THE ONLY WARRANTY APPLICABLE TO M-SYSTEM PRODUCT AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. M-SYSTEM SHALL HAVE NO LIABILITY FOR CONSEQUENTIAL, INCIDENTAL OR

SPECIAL DAMAGES OF ANY KIND WHATSOEVER.

M-System Co., Ltd., 5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN, Phone: (06) 6659-8201, Fax: (06) 6659-8510, E-mail: [email protected]

130 (5.12)

27.5 (1.08) 109 (4.29) POSITIONING

GUIDE

BUS A

BUS B*

BUS CONNECTOR

INTERNAL

POWER

■R3Y-PA16x/A■R3Y-PA16x

* DO NOT use the terminals No. 4A/4B and 3A/3B.

**For dual redundant communication.

20A / 20B

5A / 5B

4A / 4B

3A / 3B

Pi 1

Pi 16

2A / 2B

1A / 1B

7A / 7B

Pi 15

9A / 9B

Pi 14

11A / 11B

Pi 13

13A / 13B

Pi 12

15A / 15B

Pi 11

17A / 17B

Pi 10

19A / 19B

Pi 9

6A / 6B

Pi 8

8A / 8B

Pi 7

10A / 10B

Pi 6

12A / 12B

Pi 5

14A / 14B

Pi 4

16A / 16B

Pi 3

18A / 18B

Pi 2

Pi 1

Pi 16

Pi 15

Pi 14

Pi 13

Pi 12

Pi 11

Pi 10

Pi 9

Pi 8

Pi 7

Pi 6

Pi 5

Pi 4

Pi 3

Pi 2

COM(+)

20A / 20B

5A / 5B

4A / 4B

3A / 3B

2A / 2B

1A / 1B

7A / 7B

9A / 9B

11A / 11B

13A / 13B

15A / 15B

17A / 17B

19A / 19B

6A / 6B

8A / 8B

10A / 10B

12A / 12B

14A / 14B

16A / 16B

18A / 18B

PIN NO. ASSIGNMENT PIN NO. ASSIGNMENT

1A 0V 1B 0V

2A 0V 2B 0V

3A +24V 3B +24V

4A +24V 4B +24V

5A Pi 16 5B Pi 16

6A Pi 8 6B Pi 8

7A Pi 15 7B Pi 15

8A Pi 7 8B Pi 7

9A Pi 14 9B Pi 14

10A Pi 6 10B Pi 6

11A Pi 13 11B Pi 13

12A Pi 5 12B Pi 5

13A Pi 12 13B Pi 12

14A Pi 4 14B Pi 4

15A Pi 11 15B Pi 11

16A Pi 3 16B Pi 3

17A Pi 10 17B Pi 10

18A Pi 2 18B Pi 2

19A Pi 9 19B Pi 9

20A Pi 1 20B Pi 1

Other M-system Control Unit manuals

M-system

M-system R3-PA8 User manual

M-system

M-system TR3EX User manual

M-system

M-system R7ML-DC16D User manual

M-system

M-system R3-PT4 User manual

M-system

M-system R1C-GH User manual

M-system

M-system R7L-SV4-R User manual

M-system

M-system R7HL-DAC15E User manual

M-system

M-system R7C-TS4 User manual

M-system

M-system R30YV4 User manual

M-system

M-system R7ML-EC8A User manual

M-system

M-system 61F User manual

M-system

M-system R7ML-YS2 User manual

M-system

M-system Mini-M M2DL User manual

M-system

M-system M8CD1 User manual

M-system

M-system R7C-EC16B/UL User manual

M-system

M-system R7ML-EC8B User manual

M-system

M-system R7EWTU User manual

M-system

M-system R7HL-DC8C User manual

M-system

M-system R80ND2 User manual

M-system

M-system R3-PA16 User manual

M-system

M-system R7ML-EC8D User manual

M-system

M-system R5T-DA4 User manual

M-system

M-system R7M-EC8B User manual

M-system

M-system R1M-A1 User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual