M-Spa Line User manual

Owner’s Manual

P-SH069 Line

CONTENT

Safety precautions………………………………………………………………......................................................

Specifications and product overview………………………………………………..............………........................

First use preparation and set-up………………………………………………….........................……………........

Spa set-up……………………………………............................…………………………......….............................

Wired controller operation………………………………………........................…................................................

Water maintenance and chemicals………………….......................................………..………………..…...........

Drainage, cleaning and storage………………………...................................………………..………..……..........

Disposal and environmental protection…………………………....................................…..................................

Troubleshooting…………………………………………….......……………………….…...…...…..........................

SAFETY PRECAUTIONS

For your own safety and that of your product, make sure to follow the safety

precautions below. Failure to follow the instruction may result in serious injury,

property damage, or death. Improper installation or operation will void the warranty.

READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS

KEEP THE MANUAL FOR FUTURE REFERENCE

!DANGER

●Risk of Accidental Drowning. Extreme caution must be exercised to prevent

unauthorized access by children.

●Risk of drowning. Inspect the spa cover regularly for leak, premature wear, and

tear, damage or signs of deterioration. Never use a worn or damaged cover as it

will not provide the level of protection required to prevent unsupervised access

to the spa by a child.

●Risk of drowning. Always lock the spa cover after each use.

●Risk of injury. If the supply cord is damaged, it must be replaced by the

manufacturer, service agent or similarly qualified persons to avoid a hazard.

●Risk of Electric Shock. Do not permit any electrical appliances, such as a light,

telephone, radio or television within 1.5m (5 feet) of a spa tub.

●Risk of Electric Shock. Do not use the spa when it is raining, thundering, or

lightning.

●To reduce the risk of electric shock, do not use an extension cord, timers, plug

adaptors or conversion plugs to connect the unit to electric supply. Provide a

properly located outlet.

●The appliance with incorporated heating elements must be connected to a

grounded mains supply socket and a supply cord fitted with a plug and PRCD

equipped with a tripping current of 10mA.

!WARNING

● Transportable whirlpool spas with earthing must only be plugged directly into an

earthed socket-outlet of the fixed wiring.

● Components containing moving parts, except parts supplied with safety

extra-low voltage not exceeding 12V, must be inaccessible to occupants in the

spa.

● Parts incorporating electrical components, except remote control devices, must

be located or fixed, so that they cannot fall into the spa.

● Electric installation should fulfill the local requirement or standards.

● The wired controller shall be properly stored at the side pocket when not used,

to protect the controller from falling or from other factors.

● This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning and user

maintenance shall not be performed by children without supervision.

● To reduce the risk or injury, keep children away from this product unless they

are closely supervised at all times.

● To reduce the risk of child drowning, supervise children all times. Attach and

lock the spa cover after each use.

● Make sure the floor is capable of supporting the expected load, which you can

find from the spec sheet. Calculate the expected load of water capacity plus the

total weight.

● Adequate draining system must be provided around the spa to deal with

overflowing water.

● To reduce the risk of injury:

a) Lower water temperatures are recommended for young children and when

spa is used for more than 10 minutes. In order to avoid the possibility of

hyperthermia (heat stress) occurring it is recommended that the average

temperature of spa-pool water should not exceed 40°C (104°F).

b) Since excessive water temperature has a high potential for causing fetal

damage during the early months of pregnancy, pregnant or possibly pregnant

women should limit spa water temperature to 38°C (100°F).

c) Before entering a spa or hot tub the user should measure the water

temperature with an accurate thermometer since the tolerance of water

temperature-regulating devices varies.

d) The use of alcohol, drugs, or medications before or during spa use may lead

to unconsciousness with the possibility of drowning.

e) The use of alcohol, drugs, or medications can greatly increase the risk of fatal

hyperthermia in spas.

f) The causes and symptoms of hyperthermia may be described as follows:

Hyperthermia occurs when the internal temperature of body reaches a level

several degrees above the normal body temperature 37°C (98.6°F). The

symptoms of hyperthermia include an increase in the internal temperature of

body, dizziness, lethargy, drowsiness, and fainting. The effect of hyperemia

includes failure to perceive heat; failure to recognize the need to exit spa;

unawareness of impending hazard; fetal damage in pregnant women;

physical inability to exit the spa; and unconsciousness resulting in the danger

of drowning.

g) Obese persons or persons with a history of heart disease, low or high blood

pressure, circulatory system problem, or diabetes should consult a physician

before using a spa.

h) Persons using medications should consult a physician before using a spa

since some medications may induce drowsiness while other medication may

affect heart rate, blood pressure, and circulation.

i) Check with doctor before use if pregnant, diabetic, in poor health, or under

medical care.

● People with infectious disease should not use a spa or a hot tub.

● To avoid injury exercise care when entering or existing the spa the or hot tub.

● Water temperature in excess of 40°C (104°F) may be injurious to your health.

● Never use a spa or hot tub alone or allow others to use the spa alone.

● Do not use a spa or hot tub immediately following a strenuous exercise.

● Spa heat in conjunction with alcohol, drugs, or medication can cause

unconsciousness.

● Exit immediately if uncomfortable, dizzy or sleepy. Spa heat can cause

hyperthermia and unconsciousness. Do not put the spa under 0°C (32°F)

environment in order to avoid freezing if there is still water in the pool. It is

helpful to put a temp barrier mat in between the spa pool and the ground. Similar

mat, which is made of foam material, or other materials with heat barrier function

can also be used. Do not turn on the spa when the water is frozen.

● Always add chemicals to water, never add water to chemicals. Adding water to

chemicals may cause strong fumes or violent reactions and hazardous chemical

spray.

● For water already used, discharge it in time or use water chemicals for cleaning.

Usually, it is recommended to drain and refill the spa with clean water every 3-5

days.

● Use Mspa chemical kit for disinfection in accordance with manufacturer’s

instructions.

● Do not leave or set up the spa in temperature lower than 4°C (39°F) if heater is

not operating.

● Always enter and exit the spa or hot tub slowly and cautiously. Caution of wet

floor.

● To avoid damage to the pump, never turn on the spa or hot tubs unless it is

filled with water to the minimum water line.

● Place the spa or the hot tub only on a properly prepared site that can withstand

the floor loading requirement of the spa.

!CAUTION

● Never pour water with a temperature higher than 40°C (104°F) directly into the

spa.

● Always unplug this product from the electrical outlet before removing, cleaning,

servicing, or making any adjustment to the product.

● Never jump or dive into a spa or any shallow body of water.

● No part of the electric appliance is to be located above the bath during use.

● Do not bury the electrical cord. Locate the cord where it will not be damaged by

lawn mowers, hedge trimmers, and other equipment.

● Do not attempt to plug in or unplug this product while standing in water or when

your hands are wet.

● Do not use the spa if damaged during the delivery and/or malfunctioning in any

way. Contact [email protected] for further direction.

● Keep all pets away from the spa to avoid any damage.

● Do not add bath oil or bath salts to the spa water.

● Do not leave the spa empty for extended period of time. Drain water inside the

pool thoroughly if it is not used for a long period of time. Do not expose the spa

to direct sunshine. Check regularly before each use. Put away the spa or fence

it up in time after using.

● Open the spa top lid when the Bubble function is on.

● In order to avoid a hazard due to inadvertent resetting of the thermal cut-out,

this appliance must not be supplied through an external switching device, such

as a timer, or connected to a circuit that is regularly switched on and off by the

utility.

● Refer to relevant chapter for details concerning cleaning and other

maintenance.

Zone 2 Zone 2

Zone 1

Zone 0

2.5 m

1.5 m 1.5 m2.0 m 2.0 m

Warning: The water protection levels of appliance at different product zones are

different. See the following diagram. ( Installation regulations comply to IEC

60364-7-702)

NOTE-The measured zone dimensions are limited by walls and fixed partitions.

Zones

Zone 0

Zone 1

Zone 2

Description of the zones

Zone 0 is the interion of the basin including any recesses in their

walls or floors.

Zone 1 is limited by

• Zone 0

• A vertical plane 2m from the rim of the basin.

• The floor or the surface expected to be occupied by persons

• The horizontal plane 2.5m above the floor or the surface

Zone 2 is limited by

• A vertical plane external to zone 1 and parallel plane 1.5m

from the former.

• By the floor or surface intended to be occupied by persons.

SPECIFICATIONS

Control System

Total Power

Heater

Massage Air Blower

Filter Pump

Integrated Ozone Generator

Top Lid

Pool Cover

Pool Material

AC 220-240V~ 50Hz

2300W

1500W

3 Levels (Level 1: 300W, Level 2: 500W, Level 3: 720W)

12V/60W

5.5W, 30-50mg/Hr

Premium PVC leather cover with foil inside

Premium PVC tough leather, waterproof and anti-UV

Premium PVC fabric

Control System Specs P-SH069

BUBBLE SPA

Model No.

/ Code Shape Seating

Capacity Water

Capacity Outside

Dimensions Inside

Dimensions Height Weight

P-SH069 /

Line Square 930Ltr

(245gal)

1.85m

(73”)

1.45m

(57”)

0.68m

(27”)

35.5kg

(78.3lbs)

I. J. K. L.

F. G. H.

B. C. D.

PRODUCT OVERVIEW

Content of the package

NOTE: Drawings for illustration purpose only. The actual product may vary. Not to scale.

* Round or square

Only for P-SH069

* Buckle spa cover * Ground mat

This manual suits for next models

Table of contents

Languages:

Popular Hot Tub manuals by other brands

Bestway

Bestway Lay-Z-Spa 54189 manual

Jacuzzi

Jacuzzi ARGA ARG101C0110 Use & maintenance

Morphy Richards

Morphy Richards Essentials PC4006 user manual

Softub

Softub PRESTIGE Owners Manual Water Treatment Guide

JNJ SPAS

JNJ SPAS SPA-318 Programming instructions

KIRAMI

KIRAMI Comfort Family Instructions for use

QCA Spa

QCA Spa VS501 PAK (VL260 TOPSIDE) owner's manual

HoMedics

HoMedics FB-655HJ-GB manual

Everyday Hot Tubs

Everyday Hot Tubs 530 owner's manual

anko

anko SS-601A user manual

Jacuzzi

Jacuzzi Duetta 6042 Specification sheet

Pooli

Pooli OS030979B product manual

Jacuzzi

Jacuzzi alimia instructions

ab Solares Smart Spa operating manual

CalderaSpas

CalderaSpas CalderaSpas Utopia Series owner's manual

Outsunny

Outsunny 848-047V70 Assembly guide

Aquatic

Aquatic INFINITY 1 Specifications

Master Spas

Master Spas MP Force owner's manual