Lorex SG21FD3044-161 Operator's manual

www.lorexcctv.com

SG21FD3044-161 Page 1

Version 1.01

Package Contents

1Connect cameras to the monitor

4Turn the Master power switch located at

the back of the monitor ‘ON’.

2Connect one end of the ethernet cable to a

broadband router (not included) and the other

end to the back of the monitor.

5Press the Standby button to view

picture images.

3Connect one end of the power adapter (stan-

dard power cable) to the monitor, the other

end to an electrical outlet.

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, speciﬁcations and prices, without notice and without incurring any obligation. E&OE © 2006 LOREX. All rights reserved.

BACK OF THE MONITOR

BACK OF THE MONITOR BACK OF THE MONITOR

FRONT OF THE MONITOR

BACK OF THE MONITOR

ROUTER (NOT INCLUDED)

4 Color cameras are included with the Observation System. These cameras have

a single cable, and receive power directly from the Observation System.

1. Connect the female end of the supplied 57’ extension’ cable to the camera

2. Connect the male end of the supplied 57’ extension cable to an open DIN

channel on the back of the Observation System. Continue connecting

additional DIN cameras.

1 - Set up CD Rom (placed inside the owner’s manual)

1 - Owner’s Manual

1 - Quick Installation Guide

1 - Power Cord

2 - keys (for Hard Drive Bay)

1 - Network Viewer Guide

2 - Warning Decals

1 - 21” Color Monitor with Built-in Digital Video Recorder

1 - 160 GB Hard Disk Drive (installed inside hard drive bay)

1 - Remote Control with batteries

4 - Colour cameras with sunshade housing

4 - Camera brackets with mounting screws

4 - 100ft (30m) Extension Cables for camera

1 - 10ft (3m) Ethernet network cable

STEP 1

SETTING UP YOUR MONITOR FIRST

10:00

STEP 1 SHOULD TAKE

APPROXIMATELY 5 - 10

MINUTES TO COMPLETE

NOTE: The arrow mark on

top of the 6 PIN camera

cable(s) should face

UP while inserting the

6 PIN camera cable(s)

to the Monitor’s 6 PIN

connector(s).

21” FLAT SCREEN CRT/DVR OBSERVATION SYSTEM WITH 4

NIGHT VISION CAMERAS

1 - Broadband Router and Computer Required, not Included

www.lorexcctv.com

SG21FD3044-161 Page 2

Version 1.01

Record the 12 digit IP and the 12 digit

MAC Addresses

IP ADDRESS : . . .

MAC ADDRESS :

(record the period. It is part of the IP Address)

(DO NOT record the colon (:))

STEP 2

SET UP LOCAL VIEWING ON YOUR PC

1Press the ENTER button

on the remote control

(ensure batteries are

inserted)

6Double-click the Netviewer

icon on your desktop to

run the program

5Close the CD Menu

Screen. A Netviewer

icon and a Local Player

icon will appear on your

desktop

*** NETWORK INFORMATION ***

MAC ADDRESS : XX XX XX XX XX XX

IP ADDRESS : 192 . 168 . 001 . 100

SUBNET MASK : 255 . 255 . 255 . 000

GATEWAY : 192 . 168 . 001 . 001

PORT : 5000

SYSTEM CHECK…..

DYNAMIC IP REQUEST . . OK

*** MASTER HDD DETECT ***

POWER ON CHECK _ _ _ _ _ _ _ _ _ _ _ _ _OK

HDD IDENTIFY CHECK _ _ _ _ _ _ _ _ _ _ _ OK

HDD R/W CHECK __ _ _ _ _ _ _ _ _ _ _ _ _OK

MODEL : XXXXXXXXXXXXXXXXXXXXXX

HDD LBA : XXXXXXXXXXXXXXXXXXXXXX

HDD SPACE : 160 GB

100 %

4Select the netviewer option

3Insert the network

video CD software

into the computer’s

CD ROM drive

COMPUTER NOT INCLUDED

30:00

STEP 2 SHOULD TAKE

APPROXIMATELY 15 - 30

MINUTES TO COMPLETE

On your

Local Computer

www.lorexcctv.com

SG21FD3044-161 Page 3

Version 1.01

STEP 2

SET UP LOCAL VIEWING ON YOUR PC - CONTINUED

8Enter the Set-up in-

formation followed

by clicking OK

7Click the Set-up icon

11 View video images

from your computer

NETVIEWER SCREEN

10 Enter your User Name

and Password (It is

recommended that

“admin” be used for

both ID & Password)

as the default setting.

Press the OK button

9Click the connect

icon button

Enter the IP Address recorded in Step 2-2.

Enter the DVR/Monitor port (5000 by default)

Enter the User ID (admin by default), max. 5 characters

Select NTSC

NETVIEWER SCREEN

SET-UP ICON

NETVIEWER SCREEN

admin

30:00

STEP 2 SHOULD TAKE

APPROXIMATELY 15 - 30

MINUTES TO COMPLETE

www.lorexcctv.com

SG21FD3044-161 Page 4

Version 1.01

STEP 3

SET UP INTERNET REMOTE SECURITY MONITORING

2Enter ‘ddns.strategicvista.net’

in the address bar

3Click Create Account

option.

1Port Forward (to the IP of the monitor recorded in Step 2-2 of this guide) your Router

FIRST before proceeding with the Set-up (you must Port Forward Port 5000, 5001,

5002 & 5003.

5An Automated Registration

Conﬁrmation Email will be

sent to your email. Print

and Save this Registration

Conﬁrmatio.

6Enter DDNS SET option on your

monitor by pressing the Menu

button on your remote control.

Use the arrow buttons to highlight

DDNS Set. Press the Enter Button MAIN MENU

TIME/DATE SET

SEQUENCE SET

TITLE SET

ALARM SET

MOTION SET

SYSTEM (I)

SYSTEM (II)

HDD/REC SET

ALARM REC

SCHEDULE

MONITOR SET

FIRMWARE

DDNS SET

Refer to your Router’s manual for speciﬁc instructions on port forwarding (or)

Check the Router conﬁguration guide support document in the consumer guide section on our

website http://lorexstore.lorextechnology.com/uploads/PortForward_Guide.pdf

http://ddns.strategicvista.net

Create Account

Complete new account

information

1. FOR PRODUCT LICENSE select the SG21FD3044-161

option from the drop down menu.

2. FOR PRODUCT CODE enter the monitor’s MAC address

(recorded in step 2, section 2).

3. FOR URL REQUEST enter a unique URL name (eg.

Johndoe). Note: An URL name should not be more than 8

characters. 1 2

Service Provider: ddns.strategicvista.net

Domain name: house.strategicvista.net

User name: John Doe

Password: <leave this ﬁeld blank>

Use Public IP to Register: Yes

40:00

STEP 3 SHOULD TAKE

APPROXIMATELY 40 - 60

MINUTES TO COMPLETE

www.lorexcctv.com

SG21FD3044-161 Page 5

Version 1.01

DDNS: Select “YES’

Domain Name: Enter the Domain Name sent to you in the registration

conﬁrmation (Section 3-5).

User Name: Enter the User Name sent to your in the registration con-

ﬁrmation (Section 3-5).

User Password: Leave blank

Router: “Yes”

Scroll to return and press enter. Enter the DDNS set option and

verify that the DDNS STATUS is “OK”.

8Install the Net Viewer

video CD software

into your Remote

Computer

10 Close the CD Menu

Screen. A Netviewer

icon and a Local Player

icon will appear on

your desktop

9Select the Netviewer

option and follow the

dialog boxes to guide you

through installation

7Set the DDNS Settings

11 Double-click the Netviewer

icon on your desktop to

run the program 12 Click the Set-up icon

DDNS

DDNS: Y

DOMAIN NAME house

USER NAME John Doe

USER PASSWORD

ROUTER Y

RETURN

EXIT

DDNS STATUS OK

Use the UP, DOWN, LEFT, RIGHT and ENTER

keys located at the front of the monitor to set

DDNS Settings. Ensure the domain name

matches the name sent to you via email

(Note: Do not enter ‘strategicvista.net’ exten-

sion to the user name)

SET-UP ICON

COMPUTER NOT INCLUDED

40:00

STEP 3 SHOULD TAKE

APPROXIMATELY 40 - 60

MINUTES TO COMPLETE

STEP 3

SET UP INTERNET REMOTE SECURITY MONITORING - CONTINUED

On your

RemoteComputer

www.lorexcctv.com

SG21FD3044-161 Page 6

Version 1.01

FOR ADDITIONAL INFORMATION OR TROUBLESHOOTING HELP, REFER

TO YOUR OWNERS MANUAL FOR ASSISTANCE. YOU CAN ALSO CALL OR

EMAIL FOR FURTHER SUPPORT.

TOLL FREE TECHNICAL SUPPORT: 1-888-42 LOREX (1-888-425-6739)

EMAIL SUPPORT: [email protected]

WEBSITE: WWW.LOREXCCTV.COM

It’s all on the web













Product Information

User Manuals

Quick Start Guides

Speciﬁcation Sheets

Software Updates

Firmware Upgrades

13 Enter the Setup information

ﬁeld followed by clicking OK.

Click the Connect icon followed by enter-

ing the User name and Password (admin by

default). Press OK.

View the video picture remotely.

REFER TO YOUR OWNER’S MANUAL TO LEARN

MORE ABOUT THE DIFFERENT FEATURES AND

OPTIONS AVAILABLE WITH THIS SYSTEM

Enter the Domain Name sent to you in the

Registration Conﬁrmation (Section 2-5)

followed by .strategicvista.net (eg. house.

strategicvista.net)

Enter 5000 by default

Enter “admin” by default

Select NTSC by default

STEP 3

SET UP INTERNET REMOTE SECURITY MONITORING - CONTINUED

40:00

STEP 3 SHOULD TAKE

APPROXIMATELY 40 - 60

MINUTES TO COMPLETE

Other manuals for SG21FD3044-161

Table of contents

Other Lorex Security System manuals

Lorex

Lorex lx4471w Instruction Manual

Lorex

Lorex LHB926 Series User manual

Lorex

Lorex SG5550 User manual

Lorex

Lorex QLR1660 User manual

Lorex

Lorex LW2002 Series User manual

Lorex

Lorex L21Q784 User manual

Lorex

Lorex LW1200 Series User manual

Lorex

Lorex SHS-4QM Series User manual

Lorex

Lorex LW2770 SERIES User manual

Lorex

Lorex L15LD400 series User manual

Lorex

Lorex LW292 SERIES User manual

Lorex

Lorex LH041 Series User manual

Lorex

Lorex L14Q684C User manual

Lorex

Lorex L23WD SERIES User manual

Lorex

Lorex SG14S1022P User manual

Lorex

Lorex HD14S1042-A User manual

Lorex

Lorex LW1001 Series User manual

Lorex

Lorex SG21FD3044-161 Mounting instructions

Lorex

Lorex LW2760 Series User manual

Lorex

Lorex LW2310 Series User manual

Lorex

Lorex SG17LD800 User manual

Lorex

Lorex LHB926 Series Instruction Manual

Lorex

Lorex SG21FD3044-161 User manual

Lorex

Lorex SG6231 User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual