Lorex W461ASC Series User manual
HD Wi-Fi Camera
Quick Start Guide
W461ASC Series
lorex.com
En
Safety precautions
Disclaimers
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use and handling of the product.
• Use camera within given temperature, humidity & voltage levels noted in the camera’s specications.
• Do not disassemble the camera.
• Do not point the camera directly at the sun or a source of intense light.
• Periodic cleaning required. Use a damp cloth only. Do not use any harsh, chemical-based cleaners.
• The camera is rated for indoor use only. Do not mount the camera outdoors.
• Do not place the magnetic mounting plate on or near other electrical devices.
• This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between
Day/Night viewing modes, an audible clicking noise may be heard from the camera.
This clicking is normal, and indicates that the camera lter is working.
• Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation assumes no
liability for use of its products that does not conform with local laws.
Contents
What’s included...............................................................................1
Camera overview and dimensions..............................................2
Status indicator...............................................................................3
Step One: Connect to the app......................................................4
Camera placement.........................................................................5
Step Two: Mounting the camera (optional)..............................6
Lorex Home app overview............................................................7
What’s included
Camera USB
power
adapter
USB
power
cable
Mounting
template
Double-sided
mounting
tape
Magnetic
mounting
plate
Anchors &
screws (x3)
ATTENTION: A REGULATED UL / CSA APPROVED power supply is REQUIRED for use with this
camera (included). Use of a non-regulated, non-conforming power supply can damage this product and
voids the warranty.
1
Camera overview
Dimensions
ED
F
B
C
AA. Status indicator
B. Microphone
C. Device QR code
D. microSD slot
E. Speaker
F. Reset button
G. Power port
Height: 4.3” (109mm)
Width: 2.7” (68mm) 2
G
Status indicator
Solid green Operating correctly.
Flashing green Ready for connection.
Solid red Device malfunction. Press and hold the reset button.
Flashing red Network connection failed. Press and hold the reset button.
Rapidly flashing red microSD error. Remove and re-insert the microSD card, or
use a different card.
Flashing red & green Firmware update in progress.
3
Step One: Connect to the app
4
1. Scan the QR code on this page to download the free
Lorex Home app from the App Store or Google Play Store.
2. Open the Lorex Home app.
3. Sign in or sign up and create an account.
4. Connect the USB power cable to the camera and plug the USB power adapter into an outlet.
5. Once the status indicator on the camera is flashing green and the startup chime sounds,
tap the +icon to add your camera.
6. Scan the device QR code. If your mobile device cannot scan the QR code,
tap Manually enter Device ID.
7. Follow the in-app instructions to complete the setup.
Camera placement
5
• Place the camera as close to your Wi-Fi
router or access point as possible.
• Reduce the number of obstructive
materials between the camera and the
router or access point. Concrete, brick,
metal and wood are the most common
materials in your house that can cause
poor signal strength.
• Other electronic devices such as
microwaves, TVs, cordless phones,
and baby monitors can cause signal
interference. It is recommended to install
the camera as far away from these
devices as possible.
Step Two: Mounting the camera (optional)
6
1. Use the mounting template to mark two holes for the screws.
2. Drill holes using a 1/4” (6mm) drill bit. If mounting to masonry or
drywall, gently tap the anchors into the holes.
3. Align the magnetic mounting plate with the drilled holes.
4. Using a Philips screwdriver and two screws secure the magnetic
mounting plate in position.
5. Place the camera base onto the magnetic mounting plate.
6. Angle and rotate the camera’s position as needed.
7. Open the camera’s settings in the app and enable Image Rotation
to flip the camera image.
Lorex Home app
overview
Camera
live view
Take a snapshot
Two-way talk
Go on Privacy Mode
to disable the
camera’s live feed
Shared users
Settings
Date & time
Play back recorded videos
Manually record video
Back
For a complete
overview of controls
available in the
Lorex Home app,
go to lorex.com.
7
Table of contents
Languages:
Other Lorex Security Camera manuals
Lorex
Lorex LNE3142 SERIES User manual
Lorex
Lorex VANTAGE CVC7711 SERIES User manual
Lorex
Lorex CVC6973HR User manual
Lorex
Lorex VANTAGE LBC7083 User manual
Lorex
Lorex F462AQ Series User manual
Lorex
Lorex CVC6945PK4 User manual
Lorex
Lorex SG7610B User manual
Lorex
Lorex LW2301AC1 Series User manual
Lorex
Lorex CVC7723 Series User manual
Lorex
Lorex LZC7092B User manual
Lorex
Lorex LND2750A SERIES User manual
Lorex
Lorex SG7522 User manual
Lorex
Lorex VQ1532 User manual
Lorex
Lorex LDC7081 User manual
Lorex
Lorex VQ1232 User manual
Lorex
Lorex LW2202C User manual
Lorex
Lorex SG6217 User manual
Lorex
Lorex LBV2561U Series User manual
Lorex
Lorex LZV2622 SERIES User manual
Lorex
Lorex Professional CVC6993CL User manual
