Lorex VQ1732 User manual

VANDAL PROOF COLOR POLYCARBONATE

DOME CAMERA WITH 3 BOARD LENS

Owners Manual

Please read the manual thoroughly before operating this unit.

VQ1732

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF TWO SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of un-insulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance-

(servicing) instructions in the literature accompanying the appliance.

THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON THE BOTTOM OF

THE SYSTEM.

“WARNING – TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO

RAIN OR MOSITURE”

IMPORTANT SAFETY INSTRUCTIONS

This wireless A/V equipment is provided with a polarized alternating-current line plug (a plug

having one blade wider than the other). This plug will fit into the power outlet only one way.

This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing

the plug. If the plug still fail to fit, contact your electrician to replace your obsolete outlet. Do

not defeat the safety purpose of the polarized plug.

CONTENTS AND PARTS IDENTIFICATION:

This Package Contains:

1 – Vandal Proof Polycarbonate

Dome with 3 ¼” CCD Color

Cameras

12V DC Power Supply RCA/BNC Coupler

-1-

INTRODUCTION:

Congratulations on your purchase of this Vision Q Vandal Proof Color Dome Camera. This Dome camera comes with

a Polycarbonate construction to provide high impact protection. The heavy duty all metal base with swivel

bracket and tamper proof hardware adds extra protection against possible vandalism. This Dome camera can be

tilted 90° for optimum angle selection.

CONNECTING VISION Q CAMERA TO A 2 PAGE / 8 CHANNEL QUAD OBSERVATION SYSTEM

1. Mount the camera to the ceiling.

2. Connect the video extension cable (not included) from the camera to the monitor

3. Connect the power extension cable (not included) to the supplied power 12V DC adaptor

4. Attach the video extension cable to the monitor’s camera inputs (see diagram below)

5. Attach the supplied 12V DC power supply to the power extension cable and plug into an electrical outlet

6. Turn your monitor ON and select the desired channel to see the picture.

7. Repeat above procedures for connecting all 3 cameras to the monitor

CONNECTING CAMERA TO A SINGLE PAGE QUAD OBSERVATION SYSTEM

1. Mount the camera to the ceiling.

2. Connect the video extension cable (not included) from the camera to the monitor

3. Connect the power extension cable (not included) to the supplied power 12V DC adaptor

4. Attach the video extension cable to the monitor’s camera inputs (see diagram below)

5. Attach the supplied 12V DC power supply to the power extension cable and plug into an electrical outlet

6. Turn your monitor ON and select the desired channel to see the picture.

7. Repeat above procedures for connecting all 3 cameras to the monitor

BACK VIEW OF 2 PAGE 8 CHANNEL QUAD MONITOR

BNC INPUTS

VANDALPROOF

COLOR DOME CAMERA

VIDEO EXTENSION CABLE

(NOT INCLUDED)

CAMERA 1

CAMERA 2

CAMERA 3

BACK VIEW OF SINGLE PAGE QUAD MONITOR

BNC INPUTS

VANDALPROOF

COLOR DOME CAMERA

VIDEO EXTENSION CABLE

(NOT INCLUDED)

CAMERA 1

CAMERA 2

CAMERA 3

-2-

TROUBLE SHOOTING:

If the camera does not function properly, check the following points. If you continue to have problems, please call our

Toll Free Customer Support line for assistance.

PROBLEMS CAUSE AND REMEDIES

NO PICTURE DC ADAPTOR NOT PLUGGED IN

MONITOR NOT TURNED TO CORRECT

MODE OR CHANNEL

POOR PICTURE QUALITY CLEAN THE CAMERA LENS

ADJUST THE CONTRAST OR BRIGHTNESS CONTROL

OF YOUR MONITOR

FOR MORE INFORMATION

OR TO SEE THE COMPLETE RANGE OF LOREX PRODUCTS

PLEASE VISIT OUR WEBSITE:

WWW.STRATEGICVISTA.COM

TECHNICAL SPECIFICATIONS

Image Sensor ¼” CCD Color

Pixels 510 x 492

Scanning System Internal Sync

Resolution 330 lines

Min Illumination 1.0 lux

S/N Ratio More than 48 db

White Balance Auto White Balance

Electronic Shutter 1/60 – 1/100,000 sec

Lens 2.5mm

Power Consumption 12 V DC, 500mA

Operational Temp. -26°- 122°F

Dimensions 5 7/8” Dia x 4” H

Weight 29.2 oz

ALWAYS USE DISCRETION WHEN INSTALLING VIDEO AND/OR AUDIO SURVEILLANCE EQUIPMENT

WHEN THERE IS PERCEIVED PRIVACY. INQUIRE REGARDING FEDERAL, STATE AND/OR LOCAL

REGULATIONS APPLICABLE TO THE LAWFUL INSTALLATION OF VIDEO AND OR AUDIO RECORDING

OR SURVEILLANCE. PARTY CONSENT MAY BE REQUIRED.

BECAUSE OUR PRODUCTS ARE SUBJECT TO CONTINUOUS IMPROVEMEMT, SVC RESERVES THE RIGHT TO MAKE PRODUCT MODIFICATION

WITHOUT NOTICE AND WITHOUT INCURRING ANY OBLIGATION. E&OE

-3-

Table of contents

Other Lorex Security Camera manuals

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications

Lumens

Lumens VC-A50PNW installation guide