Lorex IPSC1240P User manual

Page 1

IPSC1240P

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to

Step 1 should take approximately 5-10 minutes

10:00 SETTING UP YOUR SYSTEM

System Contents

1 - Color Camera

1 - Power Supply

1 - Camera Stand (with screws)

1 - Ethernet Cable

1 - Quick Setup Guide

1 - Lorex Application Software CD

Step 1 - Set Up Your Camera First

Connect one end of the ethernet

cable to the color camera

Power Supply

Not Included: Broadband Router & Computer

Connect the other end of the ethernet cable

to your broadband router (not included)

2Connect the 12V AC power supply to

the color camera and electrical outlet

Color Camera Ethernet Cable

* This set-up guide is intented for users using Internet Explorer as their Internet browser

Page 2

IPSC1240P

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to

Insert the LOREX Application Software in to the computer’s CD-ROM

1Select the Lorex IP EDIT Option

Single click on the item listed under ‘Monitor Lists’ to set up Local

Viewing Settings

Record the IP and MAC Addreses below

3 4

Step 2 - Set Up Local Viewing On Your PC - Second

SETTING UP YOUR SYSTEM

IP ADDRESS : 192 . 168 . 45 . 39

MAC ADDRESS : 00 69 70 63 6D 22

(record the period.

It is part of the IP Address)

(DO NOT record the colon (:))

NOTE: Active X must be enabled to set up the system. If it is

already set up on your computer proceed to Step 6, otherwise

proceed to Step 5.

NOTE: Double click

here to automatically

set viewing settings

Step 2 should take approximately 15-20 minutes

20:00

Page 3

IPSC1240P

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to

Step 2 - Set Up Local Viewing On Your PC - Second (Continued)

Third, set the security level to run Active X by clicking the

Security Tab

Fourth, select the ‘Custom Level’ button. Next enable Active X in the Security

Settings window followed by pressing the OK button

Enable Active X. First open your web browser to enable Active X. Click

tools and select Internet Options

Second, click the Settings button in the Check for Newer Versions of Stored

Pages option and check ‘Automatically’ followed by OK.

5c5d

SETTING UP YOUR SYSTEM

Click “Tools” and

select “Internet

Options”

NOTE:

Click the

Security

tab NOTE: Fourth, select

the ‘Custom Level’

button

NOTE: Finally,

enable all

Active X set-

tings in the

security set-

tings window

followed by

pressing the

OK button

Page 4

IPSC1240P

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to

FOR ADVANCED VIEWING OPTIONS, REFER TO YOUR OWNERS MANUAL. TO SET UP THE INTERNET REMOTE MONITORING OPTION,

PROCEED TO STEP 3.

Step 2 - Set Up Local Viewing On Your PC - Second (Continued)

Open the Web Browser. Enter on the Address Bar the IP Address

entered in Step 4 to view the picture

NOTE: Enter your

camera’s IP Address

you recorded in Step 2

Section 4

SETTING UP YOUR SYSTEM

Page 5

IPSC1240P

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to

1Open your web browser. Enter ddns.strategicvista.net in the Address Bar

Step 3 - Set Up Internet Remote Monitoring - Third

SETTING UP YOUR SYSTEM

Port Forward your router to the IP recorded in Step 2.4 [PORT 80]

All Routers are different. To Port Forward your router

a. Refer to your Router’s manual for speciﬁc instructions on port

forwarding (or)

b. Check the Router conﬁguration guide support document in the

consumer guide section on our website for information on Port Forward-

ing http://lorexstore.lorextechnology.com/uploads/PortFor-

ward_Guide.pdf

C. Select and print the Router Conﬁguration Guide on your CD

http://ddns.strategicvista.net

Click the Create Account Option

Create Account

Complete New Account Information

A. Select IPSC1240

option from the drop

down menu

B. Enter your computer’s

MAC Address recorded

in Step 2, Part 4

C. Create your Unique URL

Name (this name will be

used) (eg. Johndoe). Note:

An URL name should not

be more than 8 characters.

Step 3 should take approximately 20-40 minutes

40:00

Page 6

IPSC1240P

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to

5Open your web

browser and

enter the

camera’s

IP address

Step 3 - Set Up Internet Remote Monitoring - Third (Continued)

SETTING UP YOUR SYSTEM

Click the Conﬁguration option

7Click the DDNS

option

Print and Save the Automated Email Registration information

Service Provider: ddns.strategicvista.net

Domain name: house.strategicvista.net

User name: John Doe

Password: <leave this ﬁeld blank>

Use Public IP to Register: Yes

NOTE: Enter the

IP Address you

recorded in Step 2

Section 4

Page 7

IPSC1240P

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to