Lorex E893DD Series User manual
4K Ultra HD Smart Deterrence IP
Dome Camera
Quick Start Guide
E893DD Series
lorex.com
En
Thanks for choosing the Lorex
4K Ultra HD Smart Deterrence IP Dome
Camera. Here’s how to get started.
Welcome!
Safety precautions
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use and handling of the product.
• Do not disassemble the camera.
• Use the camera only with compatible Lorex NVRs.
• Use the camera within given temperature, humidity and voltage levels noted in the camera’s specs.
• Do not point the camera directly towards the sun or a source of intense light.
• Install the camera where vandals cannot easily reach.
• This camera is rated for outdoor use. Installation in a sheltered location is recommended.
• Periodically clean the camera lens with a soft cloth and warm water.
• Check the packaging of the included cable to verify the cable grade based on the model number.
CBL605U: The supplied cable is rated for surface and in-wall mounting. CBL100C5: The supplied cable
is rated for surface mounting only. Cables for in-wall and oor-to-oor installations are sold separately
(CMR type). These and other cables are available at lorex.com.
Disclaimers
• For a full list of compatible NVRs, visit lorex.com/compatibility.
• Not intended for submersion in water. Installation in a sheltered location recommended.
• This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night
viewing modes, an audible clicking noise may be heard from the camera. This clicking is normal, and
indicates that the camera lter is working.
Contents
Package contents...................................................................1
Dimensions............................................................................. 2
Important installation guidelines...........................................3
1. Optimizing person and vehicle detection......................4
2. Optimizing face and mask detection.............................5
Installing the camera...............................................................8
Connecting the camera...........................................................10
Using the RJ45 cable gland & Cable extension options.......12
Audiosettings..........................................................................16
Using deterrence features......................................................13
Troubleshooting.......................................................................17
Package contents
User-supplied tools
• 4K Ultra HD Smart Deterrence IP Dome Camera
• Mounting Kit*
• Ethernet Extension Cable with Pre-attached RJ45 Cable Gland*
• Drill (drill bit size 1/8”)
• Philips screwdriver
*Per camera in multi-camera packs.
1
ATTENTION: It is recommended to connect the camera to the NVR or an external PoE switch.
If using a DC power adapter (not included) with the camera, a REGULATED power supply is REQUIRED
for use with this camera. Use of a non-regulated, non-conforming power supply can damage this
product and voids the warranty.
1
Dimensions
4.8” / 122mm
4.8”
122mm
4.4”
111mm
2
Camera base Camera
Important installation guidelines
The optimal installation location, including the height and angle of your camera, will depend on
the type of detection settings that you want to enable. Since the optimal angle for person and
vehicle detection is different from the optimal angle for face detection, you will need to select one
approach.
1. Optimizing person and vehicle detection accuracy, see page 4.
2. Optimizing face and mask detection accuracy, see pages 5-7.
3
Based on your detection preference choose between:
Note:
You cannot enable both face detection and person and vehicle detection at the same time.
3
8-16ft
30-60° down
50ft
1. Optimizing person and vehicle detection accuracy
• Choose a location where objects of interest will be no further than 50ft (15m) from the camera.
• Install the camera between 8-16ft (2.5-5m) off the ground.
• Angle the camera between 30-60° down from the level position.
• Optimal accuracy for objects of interest appear in the bottom 2/3 of the camera image.
• Point the camera where there is the least amount of obstructions (i.e. tree branches).
4
Accuracy will be inuenced by multiple factors, such as the
object’s distance from the camera, the size of the object,
and the height and angle of the camera. Night vision will
also impact the accuracy of detection.
Accuracy of person and vehicle detection
2. Optimizing face and mask detection accuracy
• Install in a bright area and avoid facing direct sunlight with strong backlights and dark shadows.
• Choose a location where objects of interest will be no further than 15ft (4.5m) from the camera.
• Position the camera 10ft (3m) off the ground to detect the full proportion of a face.
• Angle the camera around 15° down from the level position.
• Point the camera directly where objects of interest will be facing.
5
10ft
15° down
15ft
ATTENTION: Facial recording without consent
is illegal in certain jurisdictions. Lorex Technology does
not assume liability for any use of its product that fails
to conform with local laws.
Table of contents
Languages:
Other Lorex Security Camera manuals
Lorex
Lorex Vantage MCB7041 User manual
Lorex
Lorex LNE3142 SERIES User manual
Lorex
Lorex L21Q784P User manual
Lorex
Lorex CVC6945 User manual
Lorex
Lorex CVC7993 User manual
Lorex
Lorex LNZ32P12 series User manual
Lorex
Lorex C861MB Series User manual
Lorex
Lorex LND3152 SERIES User manual
Lorex
Lorex DVM5051 User manual
Lorex
Lorex CVC6999U User manual
Lorex
Lorex LZV2622 SERIES User manual
Lorex
Lorex VQ1536HRB User manual
Lorex
Lorex SG4934B User manual
Lorex
Lorex LBV2521 User manual
Lorex
Lorex LNZ32P12 series User manual
Lorex
Lorex LW2175R SERIES User manual
Lorex
Lorex IPSC2230P User manual
Lorex
Lorex CVC7562 Series User manual
Lorex
Lorex LW1740 SERIES User manual
Lorex
Lorex SG7555BP User manual
