Lorex E893AB Series User manual
4K IP Smart Deterrence Bullet
Security Camera
Quick Start Guide
E893AB Series
lorex.com
En
Thanks for choosing the Lorex
4K IP Smart Deterrence Bullet Camera.
Here’s how to get started.
Welcome!
Contents
Package contents...........................................................................1
Dimensions.......................................................................................2
Safety precautions..........................................................................3
Disclaimers.......................................................................................4
Important installation guidelines.................................................5
1. Optimizing person and vehicle detection..........................6
2. Optimizing face and mask detection.................................7
Installing the camera......................................................................10
Connecting the camera.................................................................12
Using the RJ45 cable gland..........................................................14
Audio settings..................................................................................18
Using deterrence features.............................................................15
Troubleshooting..............................................................................19
Package contents
User-supplied tools
• 4K IP smart deterrence bullet security camera
• Mounting kit*
• Ethernet extension cable with pre-attached RJ45 cable gland*
• Drill (drill bit size ”)
• Philips screwdriver
*Per camera in multi-camera packs.
1
ATTENTION: It is recommended to connect the camera to the NVR or an external PoE switch.
If using a DC power adapter (not included) with the camera, a REGULATED power supply is REQUIRED
for use with this camera. Use of a non-regulated, non-conforming power supply can damage this
product and voids the warranty.
Dimensions
6.87” / 175mm
2.87”
73mm
2.76”
70mm
2
Safety precautions
3
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use and handling of the product.
• Use the camera only with compatible Lorex NVRs.
• Do not disassemble the camera.
• Use the camera within given temperature, humidity and voltage levels noted in the camera’s
• Do not point the camera directly towards the sun or a source of intense light.
• Install the camera where vandals cannot easily reach.
• Secure cabling so that it is not exposed or easily cut.
• This camera is rated for outdoor use. Installation in a sheltered location is recommended.
• Use only a regulated power supply with the product. Use of a non-regulated, non-conforming
power supply can damage the product and voids the warranty.
• Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh,
chemical-based cleaners.
• Check the packaging of the included cable to verify the cable grade based on the model number.
CBL605U: The supplied cable is rated for surface and in-wall mounting. CBL100C5: The supplied
sold separately (CMR type). These and other cables are available at lorex.com.
2
Disclaimers
• For a full list of compatible NVRs, visit lorex.com/compatibility.
• To ensure that you are viewing camera video in full 4K resolution (4K monitor required), check
the video output resolution of your NVR. For full instructions, see your NVR’s documentation at
lorex.com.
• Not intended for submersion in water. Installation in a sheltered location recommended.
• This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between
Day/Night viewing modes, an audible clicking noise may be heard from the camera. This clicking
4
Important installation guidelines
The optimal installation location, including the height and angle of your camera, will depend on
the type of detection settings that you want to enable. Since the optimal angle for person and vehicle
detection is different from the optimal angle for face detection, you will need to select one approach.
1. Optimizing person and vehicle detection accuracy, see pg.6
2. Optimizing face and mask detection accuracy, see pg.7-9
5
Based on your detection preference choose between:
4
Note:
You cannot enable both face detection and person and vehicle detection at the same time.
8-16ft
30-60° down
50ft
1. Optimizing person and vehicle detection accuracy
• Choose a location where objects of interest will be no further than 50ft (15m) from the camera.
• Install the camera between 8-16ft (2.5-5m) off the ground.
• Angle the camera between 30-60° down from the level position.
• Optimal accuracy for objects of interest appear in the bottom ⅔of the camera image.
• Point the camera where there is the least amount of obstructions (i.e. tree branches).
6
object’s distance from the camera, the size of the object, and
the height and angle of the camera. Night vision will also
impact the accuracy of detection.
Accuracy of person and vehicle detection
Table of contents
Languages:
Other Lorex Security Camera manuals
Lorex
Lorex SG6217 User manual
Lorex
Lorex LW4211-W User manual
Lorex
Lorex LKB343B User manual
Lorex
Lorex Halo Series User manual
Lorex
Lorex LEV2522PK4B User manual
Lorex
Lorex LBV4711BW-4PK User manual
Lorex
Lorex CVC7731 SERIES User manual
Lorex
Lorex Vantage LNC116 User manual
Lorex
Lorex VQ1536HR User manual
Lorex
Lorex CVC7721 Series User manual
Lorex
Lorex CVC7661 Series User manual
Lorex
Lorex VANTAGE LBC7183 User manual
Lorex
Lorex LZV1722 User manual
Lorex
Lorex SG7382 User manual
Lorex
Lorex SG4933R User manual
Lorex
Lorex LW4211 SERIES User manual
Lorex
Lorex E841CD Series User manual
Lorex
Lorex L21Q784P User manual
Lorex
Lorex CVC6941 User manual
Lorex
Lorex LBV2723 SERIES User manual
