Linksys WAP11 - Instant Wireless Network Access... Original operating instructions

A Division of Cisco Systems, Inc.

Model No.

Quick Installation

Model No.

Wireless

GHz

2.4

802.11b

WAP11

Access Point

Wireless-B

ALocate an optimum location

for the Access Point. The best

place for the Access Point is

usually at the center of your

wireless network, with line of

sight to your wireless devices.

Usually, the higher you place

the Access Point, the better the

performance will be.

BFix the direction of the anten-

nas. Both should be perpen-

dicular to the ground and

parallel to each other.

CConnect the included Ethernet

network cable to the Access

Point. Connect the other end

of the network cable to a

switch or hub. The Access Point

will then be connected to your

wired network.

DConnect the power adapter to

the Access Point’s Power port.

Only use the power adapter

supplied with the Access Point.

Use of a different adapter may

result in product damage.

Connect the Wireless-B

Set up the Wireless-B Access Point

The Setup Wizard will take you

through all the steps necessary to

configure the Access Point, so your

wireless and wired networks will be

able to communicate and share

resources.

AInsert the Setup CD-ROM into

your PC’s CD-ROM drive. Opti-

mally, your PC should be on

your wired network.

BThe Welcome screen should

appear on your monitor. If it

does not, click Start and

choose Run. In the field that

appears, enter D:\setup.exe (if

“D” is the letter of your CD-ROM

drive). Then click Setup.

CMake sure the Access Point is

connected to your wired net-

work, so you can configure the

Access Point through any PC

on your wired network. Click

Next.

DThe next screen will display a

list of access points on your

network, along with the status

information for each access

point. Select the Access Point

you want to configure by click-

ing its name. Then click Yes.

NOTE: In order for all other wireless

devices to communicate with the

Access Point, those devices must be

set to infrastructure mode. If any wire-

less devices are configured as ad-hoc

mode, they WILL NOT be recognized by

the Access Point.

Package Contents

• Wireless-B Access Point

• Power Adapter

• Setup CD-ROM with User Guide

• Quick Installation Guide

• Ethernet Network Cable

• Registration Card

Access Point

Model No.

HThe Security screen will

appear. Select the level of

Wired Equivalent Privacy (WEP)

encryption for your wireless net-

work.

To automatically generate a

WEP key, enter a passphrase. If

you want to manually enter the

WEP key, leave the Passphrase

field blank.

Then click Next.

IThe second Security screen

shows the WEP key. If you

entered a passphrase, then

the Key 1 field will display the

automatically generated WEP

key. If you did not enter a pass-

phrase, then enter a WEP key in

the Key 1 field. Click Next.

JOn the next screen, review

your settings. If they are cor-

rect, click Yes to save these

settings. If there are any prob-

lems with the settings, click No

to exit the Setup Wizard.

EOn the Enter Network Pass-

word screen, enter the Access

Point’s default password,

admin, in the Password field.

Then click OK.

FThe Basic Settings screen will

appear. Enter a unique name

in the AP Name field. From the

Network Setting drop-down

menu, select Automatically if

your network has a router or

other DHCP server, or select

Static IP if your network does

not have a DHCP server. If you

selected Static IP, enter an IP

Address and Subnet Mask

appropriate for your network.

Click Next.

GThe Basic Wireless Settings

screen will appear. Enter your

wireless network’s SSID, which is

like your network’s name.

Select the channel at which

the network broadcasts its wire-

less signal. Then click Next.

KAt this point, the configuration

performed with the Setup Wiz-

ard is complete. To configure

any other access points in your

network, you can run this Setup

Wizard again. Click Exit to exit

the Setup Wizard.

Congratulations! The installation of

the Wireless-B Access Point is

complete.

WAP11_V2.8-QI-30731NC JL

For additional information or troubleshooting

help, refer to the User Guide on the Setup CD-

ROM. You can also call or e-mail for further

support.

24-hour Technical Support

800-326-7114

(toll-free from US or Canada)

E-mail Support

[email protected]

Website

http://www.linksys.com or

http://support.linksys.com

RMA (Return Merchandise Authorization)

http://www.linksys.com/support

FTP Site

ftp://ftp.linksys.com

Sales Information

800-546-5797 (800-LINKSYS)

A Division of Cisco Systems, Inc.

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

Other manuals for WAP11 - Instant Wireless Network Access...

Other Linksys Wireless Access Point manuals

Linksys

Linksys WAP2000 Operation manual

Linksys

Linksys LAPN600 User manual

Linksys

Linksys LAPAC1750 User manual

Linksys

Linksys WAP54GP - Wireless-G Access Point User manual

Linksys

Linksys WAP51AB - Instant Wireless - Access Point User manual

Linksys

Linksys WAP54G - Wireless-G Access Point User manual

Linksys

Linksys WAP54G - Wireless-G Access Point Original operating instructions

Linksys

Linksys Instant Broadband Series Guide

Linksys

Linksys WAP54G - Wireless-G Access Point User manual

Linksys

Linksys WPG54G Original operating instructions

Linksys

Linksys WAP11 - Instant Wireless Network Access... User manual

Linksys

Linksys WAP2000 User manual

Linksys

Linksys WAP54G - Wireless-G Access Point User manual

Linksys

Linksys WAP54GPE - Wireless-G Exterior Access Point User manual

Linksys

Linksys WAP11 - Instant Wireless Network Access... User manual

Linksys

Linksys WAP54G - Wireless-G Access Point User manual

Linksys

Linksys WAP300N User manual

Linksys

Linksys WAP11 v2.2 User manual

Linksys

Linksys WAP2000 Original operating instructions

Linksys

Linksys LAPN300 User manual

Linksys

Linksys WAP55AG - Wireless A+G Access Point User manual

Linksys

Linksys WAP54GPE - Wireless-G Exterior Access Point Operation manual

Linksys

Linksys WAP11 v2.2 User manual

Linksys

Linksys WAP4400N Operation manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide