Linksys WAP54G - Wireless-G Access Point User manual
A Division of Cisco Systems, Inc.
®
Model No.
Model No.
Wireless Quick Installation Guide
Wireless
1
Quick Installation Guide
Model No.
GHz
2802.11g
4
,
WAP54G ver. 2 (UK)
Access Point
Wireless-G
Package Contents
• Wireless-G Access Point
• Detachable Antennas
• Power Adapter
• Setup CD with User Guide
• Ethernet Network Cable
• Quick Installation
2
1
ALocate an optimum location
for the Access Point. The best
place for the Access Point is
usually at the center of your
wireless network, with line of
sight to all of your PCs and
wireless accessories.
BFix the direction of the
antenna. Try to place it in a
position that will best cover
your wireless network. Nor-
mally, the higher you place the
antenna, the better the perfor-
mance will be. The antenna's
position enhances the receiv-
ing sensitivity.
CConnect a standard Ethernet
network cable to the Access
Point. Then, connect the other
end of the Ethernet cable to a
switch or router. The Access
Point will then be connected to
your 10/100 Network.
DConnect the AC Power
Adapter to the Access Point's
Power Socket. Only use the
power adapter supplied with
the Access Point. Use of a dif-
ferent adapter may result in
product damage.
Connecting the Access Point
3
2
B
Now that you've connected the
Access Point to your wired network,
you are ready to begin setting it up.
This Setup Wizard will take you
through all the steps necessary to
configure the Access Point.
AInsert the Setup Wizard CD into
your PC's CD-ROM drive. Your
PC must be on your wired net-
work to set up the Access Point.
BThe Setup Wizard's Welcome
screen should appear on your
monitor. If it does not, this
means the Setup Wizard is not
automatically running as it
should. Start the Setup Wizard
manually by clicking the Start
button, selecting Run, and typ-
ing d:\setup.exe (where “D” is
your PC's CD-ROM drive). Click
the Setup button to continue
this Setup Wizard. Click the User
Guide button to view the User
Guide. To exit this Setup Wizard,
click the Exit button.
NOTE: The Access Point should be config-
ured through the Setup Wizard and set up
through a wired network connection.
Configuring the Access Point
4
CThe next screen shown displays
how the Access Point should
be connected while running
this Setup Wizard. Optimally,
you should perform this setup
through a PC on your wired
network. Click the Next button
to continue the Setup Wizard.
DThe Setup Wizard will run a
search for the Access Point
within your network and then
display a list along with the sta-
tus information for each
access point. If this is the only
access point on your network, it
will be the only one displayed.
If there are more than one dis-
played, select the Access Point
by clicking on it and click the
Yes button to continue the
Setup Wizard.
EYou will be asked to sign onto
the Access Point you've
selected. Enter the Password
you've assigned. If none has
been assigned, enter the
default password: admin.
Then, click the OK button. (This
password can be changed
from the Web-based Utility's
Password tab.)
C
D
E
5
FThe Configure Network Address
Settings screen will appear
next. Enter an IP Address, Sub-
net Mask, and the IP Address of
your network Gateway. Then,
click the Next button.
IP Address. This IP address must
be unique to your network. (The
default IP address is
192.168.1.245.)
Subnet Mask. The Access
Point's Subnet Mask must be
the same as your Ethernet net-
work.
Gateway. This IP address
should be the IP address of the
gateway device that allows for
contact between the Internet
and the local network.
GThe Wireless Settings screen
should now appear. Enter your
wireless network's SSID and
select the channel at which
the network broadcasts its wire-
less signal. Enter, also, a Device
Name to prevent any confu-
sion when using multiple
Access Points. Then, click the
Next button.
F
6
SSID. The SSID is the unique
name shared among all points
in a wireless network. The SSID
must be identical for all points
in the wireless network. It is
case sensitive and must not
exceed 32 characters, which
may be any keyboard charac-
ter. Make sure this setting is the
same for all points in your wire-
less network.
Channel. Select the appropri-
ate channel from the list pro-
vided to correspond with your
network settings. All points in
your wireless network must use
the same channel in order to
function correctly.
Device Name. The Device
Name is a unique name given
to the Access Point to prevent
confusion when using multiple
Access Points.
HThe (optional) Security Settings
screen will appear next. From
this screen, you can set the
level of encryption you desire
for your network, along with
selecting Passphrases and/or
encryption keys.
With WPA PSK, or Pre-Shared
Keys, you have two encryption
options, TKIP and AES, with
dynamic encryption keys.
Select the type of algorithm,
G
H
7
I
TKIP or AES. Enter a WPA Shared
Key of 8-32 characters.
The WEP key can consist of the
letters “A” through “F” and the
numbers “0” through “9” and
should be 10 characters in
length for 64-bit encryption or
26 characters in length for 128-
bit encryption. All points in your
wireless network must use the
same WEP key to utilize WEP
encryption.
Click the Next button to con-
tinue.
IYou should now review the set-
tings you've chosen. If these
settings are correct, click the
Yes button to save these set-
tings. If you wish to change any
of the settings, click the No but-
ton. You will exit the Setup Wiz-
ard and can start it again to
revise your settings.
8
WAP54G-V2-UK-QIG-40224NCKL
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2004
Cisco Systems, Inc. All rights reserved.
For additional information or troubleshooting
help, refer to the User Guide on the CD-ROM
or the Technical Support Insert. You can also
e-mail for further support.
Website
http://www.linksys.com/international
JAt this point, the configuration
performed with the Setup Wiz-
ard is complete. To configure
any other Access Points in your
network, you can run this Setup
Wizard again. Click the Exit but-
ton to exit the Setup Wizard.
J
A Division of Cisco Systems, Inc.
®
Modelnr.
Modelnr.
Trådløs Installationsvejledning
Trådløs
1
Installationsvejledning
Modelnr.
WAP54G ver. 2 (DK)
Access point
Trådløs-G
Pakkens indhold
• Trådløs-G Access point
• Aftagelige antenner
• Strømforsyning
• Installations-cd med
brugervejledning (kun på engelsk)
• Ethernet-kabel
• Installationsvejledning
GHz
2802.11g
4
,
2
1
AFind en velegnet placering til
access point'et. Den bedste
placering er normalt midt i det
trådløse netværk med en fri
sigtelinje til alle dine pc'er og
det trådløse tilbehør.
BFikser antennens retning.
Forsøg at placere den i en
position, der dækker det
trådløse netværk bedst.
Normalt bliver modtage- og
sendeforhold bedre, jo højere
du placerer antennen.
Antennens position forbedrer
modtagelsen.
CTilslut et standard Ethernet-
kabel til access point'et. Tilslut
den anden ende af Ethernet-
kablet til en switch eller router.
Access point'et er derefter
tilsluttet til 10/100-netværket.
DTilslut vekselstrømsforsyningen til
strømstikket på det trådløse
access point. Brug kun den
strømforsyning, der følger med
det trådløse access point. Brug
af en anden strømforsyning
kan beskadige produktet.
Tilslutning af access point'et
Other manuals for WAP54G - Wireless-G Access Point
8
Table of contents
Other Linksys Wireless Access Point manuals
Linksys
Linksys WAP54GP - Wireless-G Access Point Operation manual
Linksys
Linksys WAP51AB - Instant Wireless - Access Point User manual
Linksys
Linksys WAP4400N Operation manual
Linksys
Linksys LAPAC2600 User manual
Linksys
Linksys WAP55AG - Wireless A+G Access Point User manual
Linksys
Linksys WAP54G - Wireless-G Access Point User manual
Linksys
Linksys WPG54G Original operating instructions
Linksys
Linksys WAP11 v.2.6 User manual
Linksys
Linksys WAP11 - Instant Wireless Network Access... User manual
Linksys
Linksys LAPN300 User manual
Linksys
Linksys EtherFast Instant Broadband BEFW11S4 Guide
Linksys
Linksys WAP200 Operation manual
Linksys
Linksys Instant Broadband Series Guide
Linksys
Linksys WAP55AG - Wireless A+G Access Point Original operating instructions
Linksys
Linksys WAP200E Operation manual
Linksys
Linksys LAPAC1750 User manual
Linksys
Linksys LAPAC1750PRO User manual
Linksys
Linksys AC1200 User manual
Linksys
Linksys Instant Wireless Series WAP54G User manual
Linksys
Linksys EtherFast Instant Broadband BEFW11S4 Original operating instructions
