Linksys G User manual

A Division of Cisco Systems, Inc.

Model No.

Wireless

Quick Installation Guide

WPC54G (EU)

Notebook Adapter

Wireless-G

GHz

802.11g

Package Contents

• Wireless-G Notebook Adapter

• One Setup CD-ROM

• One User Guide on CD-ROM

• Quick Installation Guide

The Wireless-G Network Adapter is

installed and set up using the Setup

Wizard that comes on the CD

enclosed.

ATo begin, insert the Setup

Wizard CD-ROM into your CD-

ROM drive. The Setup Wizard

should run automatically, and

the Welcome screen should

appear.

BTo install the Adapter, click

Click Here to Start on the

Welcome screen.

CAfter reading the License

Agreement, click Next to

continue the installation and

Windows will begin copying the

files onto your PC.

DThe Setup Wizard will now

prompt you to install the

Adapter in your PC.

Proceed to Step 2.

Begin Installation

IMPORTANT: Do not install the Adapter in Your PC

until you are instructed to do so in Step 2 or the

Adapter will not install propertly.

Now that the Setup Wizard has

prompted you to install the Adapter,

follow the instructions below.

ALocate an available CardBus

slot on your notebook PC.

BWith the connector pin end

facing the CardBus slot and

the label facing up, slide the

Adapter into the CardBus slot

until it locks in place.

CWindows 98 and Windows Me

users may need to restart their

PCs again when prompted to

do so.

DThe Power LED should light up

when the Adapter is installed

correctly.

EWindows will begin copying the

driver files to your computer. If

Windows asks you for the origi-

nal Windows CD-ROM, insert

the CD-ROM, and direct Win-

dows to its correct location

(e.g., D:\).

FOnce the Adapter is con-

nected and the Setup Wizard

appears on your screen, click

Next on the Connecting the

Adapter screen to proceed.

Proceed to Step 3.

Connect the Adapter

Connecting

the Adapter

The next screen to appear will be the

Available Wireless Network screen.

From this screen, you can launch

one of the two setup methods.

Setting Up the Adapter with

Available Networks

On the Available Wireless Network

screen, the available networks are

listed in the center table by SSID.

Select the wireless network you wish

to connect to and click the Connect

button. (If you do not see your net-

work listed, you can click the Refresh

button.)

3Set Up the Adapter

IMPORTANT:There are two ways to set up the Adapter. For Quick Installation,

use this document only if your network appears on the Available Wireless Net-

work screen.

Manual Setup: If you are utilitizing Manual Setup, click the Manual Setup button and

follow the on-screen prompts.

Available Wireless Network

WEP Key Needed

If the network utilizes wireless security,

you will need to configure security on

the Adapter. If not, you will be taken

directly to the

Congratulations

screen,

shown in Step B.

If wireless security has been

enabled on this network, you will

see a wireless security screen. If

your network utilizes WEP (Wired

Equivalent Privacy) encryption,

the

WEP Key Needed for Connec-

tion

screen will appear. If your net-

work utilizes WPA-Personal

encryption, the WPA-Personal

Needed for Connection

screen

will appear.

WEP Key Needed for Connection

Select

64-bit or 128-bit

Enter a passphrase or WEP key.

Passphrase

- Enter a passphrase

in the

Passphrase

field. This is

case-sensitive and should not be

longer than 16 alphanumeric

characters. It must match the

passphrase of your other wireless

network devices.

WEP Key

- The WEP key must

match the WEP key of your wire-

less network. For 64-bit encryp-

tion, enter exactly 10

hexadecimal characters. For 128-

bit encryption, enter exactly 26

hexadecimal characters. Valid

hexadecimal characters are “0”

to “9” and “A” to “F”.

Then, click

Connect

and pro-

ceed to Step B.

WPA-Personal

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

wpc54g-v7-qig-51117 TE

NOTE:

After the Adapter is installed, the

Wireless Network Monitor screen will open

and its icon will appear in your PC’s system

tray. Double-click the icon if you want to

open the Wireless Network Monitor for find-

ing available wireless networks or making

additional configuration changes.)

Wireless Network

Monitor icon

Needed

WPA-Personal for Connection

Encryption

- Select the type of

algorithm you want to use,

TKIP

AES,from the Encryption

drop-

down menu.

Passphrase

- Enter a Passphrase

of 8-63 characters in the

Pass-

phrase

field.

Then, click

Connect

and pro-

ceed to Step B.

After the Adapter has been con-

figured for the network, the

Con-

gratulations

screen will appear.

Click

Connect to Network

to con-

nect to your network.

Congratulations! Setup is complete.

For additional information or troubleshooting help,

refer to the User Guide on the Setup CD-ROM. You

can also call or email for further support.

Website

http://www.linksys.com/international

Registration

http://www.linksys.com/registration

A Division of Cisco Systems, Inc.

Modelnr.

Wireless

Installationsvejledning

WPC54G (DK)

Notebook-netværkskort

Trådløs-G

GHz

802.11g

Pakkens indhold

• Trådløs-G Notebook-kort

• Én installations-cd-rom

• Én brugervejledning på cd-rom

• Installationsvejledning

Trådløs-G-netværkskortet installeres

og konfigureres ved hjælp af den

guidede konfiguration på den

medfølgende cd.

APlacer først cd-rom'en med

guidet konfiguration i

cd-rom-drevet. Den guidede

konfiguration køres automatisk,

og skærmbilledet Welcome

(Velkommen) vises.

BKlik på knappen Click Here to

Start (Klik her for at starte) på

skærmbilledet Welcome

(Velkommen) for at installere

kortet.

CNår du har læst licensaftalen,

skal du klikke på Next (Næste)

for at fortsætte installationen.

Derefter overfører Windows

filerne til din pc.

DDen guidede konfiguration

spørger, om du vil installere

netværkskortet på pc'en.

Fortsæt til trin 2.

Start installation

VIGTIGT: Installer ikke netværkskortet på din pc,

før du bliver bedt om det i trin 2 - ellers installeres

netværkskortet ikke korrekt.

Når den guidede konfiguration har

bedt dig om at installere

netværkskortet, skal du følge

nedenstående vejledning.

AFind et tilgængeligt CardBus-

stik på din notebook-pc.

BSkub netværkskortet med

tilslutningsbenet forrest og

mærkatsiden opad ind i

CardBus-stikket, indtil det klikker

på plads.

CWindows 98- og Me-brugere

bliver muligvis bedt om at

genstarte deres pc.

DLysdioden Power lyser, når

netværkskortet er korrekt

installeret.

EWindows begynder at kopiere

driverfilerne til din computer.

Hvis du bliver bedt om at

placere den originale

Windows-cd-rom i cd-rom-

drevet, skal du gøre dette og

derefter angive dens

placering, f.eks. D:\.

FNår netværkskortet er tilsluttet

og den guidede konfiguration

vises på skærmen, skal du

klikke på Next (Næste) på

skærmbilledet Connecting the

Adapter (Tilslutning af

netværkskortet) for at fortsætte.

Fortsæt til trin 3.

Tilslutning af kortet

Tilslutning af

netværkskortet

Det næste skærmbillede, der vises,

er Available Wireless Network

(Tilgængelige trådløse netværk). På

dette skærmbillede kan du starte en

af de tokonfigurationsmetoder.

Konfigurationaf netværkskortet

med tilgængelige netværk

På skærmbilledet Available Wireless

Network (Tilgængelige trådløse

netværk) vises en oversigt over de

tilgængelige trådløse netværk i den

midterste tabel opstillet efter SSID.

Vælg det trådløse netværk, du vil

oprette forbindelse til, og klik på

knappen Connect (Opret

forbindelse). (Hvis du ikke får vist en

oversigt over netværk, kan du klikke

på knappen Refresh (Opdater)).

3Konfiguration af netværkskortet

VIGTIGT: Der findes tomåder at konfigurere netværkskortet på. I forbindelse

med hurtig installation skal du kun bruge dette dokument, hvis dit netværk

vises på skærmbilledet Available Wireless Network (Tilgængelige trådløse

netværk).

Manual Setup:Hvisdubruger Manual Setup(Manuel konfiguration),skaldu klikkepå

knappen Manual Setup og følge vejledningen på skærmen.

Tilgængelige trådløse

netværk

Table of contents

Languages:

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

D-Link

D-Link DWA-121 Quick install guide

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide