Linak MEDLINE LA32 Operational manual

PRODUCT DATA SHEET

ACTUATOR

LA32

Features and options:

• 24VDCpermanentmagnetmotor

• Thrustupto6000N(withballscrew)

• Stainlesssteelpistonrod

• High-strengthplastichousingprotectsmotor

 andgears

• Elegantandcompactdesignwithsmall

 installationdimensions

• Protectionclass:IPX1

• Colour:black

• 2250mmstraightcablewith6.3mmjackplug

• Lownoiselevel:46dB(A);measuringmethod

 DS/ENISO3746,actuatornotloaded

• LA32Kwithballscrewanddouble-actingbrake

 (i.e.pushandpull/bothdirections)

• Protectionclass:IPX5orIPX6

• Reed-switchforexactpositioning(8pulsesper

 spindlerevolution)

• LA32with5mm.pitchF:Manualquickrelease

• LA32with5mm.pitchFH:Manualquickrelease

 withdampenedmovement

• Mechanicalsplinesfunction(pushonly)

• Electricalsplinesfunction,built-inmicro-switchin

 backfixture,theactuatorcanthereforeonlybe

 usedforpush.(Onlyon01and02backfixture)

• LA32Kwithballscrewanddouble-actingbrake

 (i.e.pushandpull/bothdirections)

• LA32KASwithballscrewandsafetynut

• LA32KSMwithballscrew,safetynutand

 mechanicalsplines

• Availablewith0.2mor0.4mcoiledcable

• LA32JKSMavailablewith2-speedfacilityforthe

 LINAKJUMBOSYSTEM

• CS32;electroniclimitswitch(built-in)

Usage:

• Dutycycle:Max.10%or2minutescontinuous

 usefollowedby18min.notinuse

• Ambienttemperature+5°to+40°C

• ForusewithLINAKcontrolboxesCB8,CB12,

 CB14andCS16PCBorinternalCS32PCB

• ShouldLA32beusedwithanonLINAKcontrol

 unit,pleaseaskthenearestLINAK

 representativeforfurtherdetails

Accessories::

• CS16;electroniclimitswitch

• Opticalencoder

• SLS:safetylimitswitch

The LA32 is a powerful actuator that can be

supplied with a ball screw spindle to give

outstanding performance. The ideal choice for a

wide range of applications including adjustment of

hospital beds.

The LA32 has many special options including a

safety nut, splines, quick release (F) and an optional

protection class up to IPX6 standard.

Technical specifications:

Type

321xxx+00xxx4xx

322xxx+00xxx4xx

322xxx+40xxx4xx

32Kxxx+x0xxx4xx

32Kxxx+10xxx4xx

32Kxxx+30xxx4xx

328xxF+x0xxx4xx

32Kxxx+30xxx3xx

(2000N)

4.5

9.5

(7500N)

(2000N)

13.6/8.5

15/6.5

(7500N)

3000

3000 3000

Push

7500

P= Stroke lengths where potentiometer is possible as standard

* LINAK control boxes are designed so that they will short-circuit the motor terminals (poles) of the

actuator(s) when the actuator(s) are not running. This solution gives the actuator(s) a higher self-locking

ability. If the actuator(s) are not connected to a LINAK control box the terminals of the motor must be short-

circuited to achieve the above mentioned self-locking ability.

# = Not with spindle potentiometer (stroke length max. 220 mm)

K= Ball screw

KAS = Ball screw with safety nut

KSM = Ball screw with splines and safety nut

R= Reed-switch

F= Manual quick release

FH = Manual quick release with dampened movement

KAS and KSM are only available on LA32K (with ball screw)

The above measurements are made in connection with a CB12, the LA32JKSM with a CBJ1 high speed.

Maximumloadinpull=2000N

Graphs:

LA32 current v´s load

0,5

1,5

2,5

3,5

4,5

0 1000 2000 3000 4000 5000 6000

Thrust (Nm)

Amp.

6mm pitch

5mm pitch 3mm pitch Ball screw

Thrust (N)

LA32 speed v´s load

0 1 234 5 6

Thrust KN

Speed (mm/s)

3mm pitch

Ball screw

6mm pitch

5mm pitch

Thrust (N)

1000 2000 3000 4000 5000 6000

Measurements are made in connection with a CB12

32 1 1 0 0 + 10 4 0 0

2 5 0

Cables: Jack cable (General tolerance +/- 0.07m)

0 = *Straight 2.3 m 5 = Straight without plug 1 m (CS) always black

1 = *Straight 1.05 m X = *Other cablel/ length

2 = *Coiled 0.4 m * always the same colour as the actuator

3 = *Coiled 0,2 m

4 = Straight without plug 0,5 m (Potentiometer) always black

Protection Class: 0 = IPX1

1 = IPX5

2 = IPX6 Washable

Motor type: 0 = 24V 4 = 24V L-motor standard motor, will always have to

1 = 24V S-motor be chosen for use with a LINAK control box.

2 = 12V S-motor 5 = 12V motor

3 = 24V Jumbo motor

Stroke length: XXX = mm Max. 400 mm for 3-6 mm pitch (up to 600 mm with special (20%) items

Max. 500 mm for 9-12 mm pitch (up to 600 mm with special (20%) items

Min. 100 mm

Install. dim. 0 = Standard

X = Other install. dim.

Option: 1 = Safety nut RECOMMENDED

0 = None 4 = Brake

2 = Steel splines 5 = Brake with safety nut

3 = Steel splines with safety nut

Colour: + = Grey

- = Black

Option: 0 = None

F = Quick release (F) H = Quick release, dampened movement(FH)

Positioning C/S 0 = None

Optical encoder: P = Potentiometer 1 kohm R = Reed switch

L = Potentiometer 5 Kohm D = Optical encoder

T = Potentiometer 10 Kohm

Y = CS 32A mount. (Not IP65 / 66)

Z = CS 32B mount.

C = CS 32C mount.

Back Fixture: 1 = Standard 5 = Large standard

2 = Turned 90 degrees 6 = Large turned 90 degrees

A = Standard with El-splines

B = Turned 90 degrees with El-splines

Spindle type: 1 = 3 mm (1 threaded) 7 = 12 mm (4-threaded)

2 = 6 mm (2 threaded) 8 = 5 mm (2-threaded)

3 = 9 mm (3 threaded) K = Ball spindle

4 = 4 mm (2 threaded)

5 = 2,5 mm (1 threaded)

Actuator type: 32 = LA32

LA32

Ordering example:

The user is responsible for determining the suitability of LINAK products for speciﬁc application.

LINAK takes great care in providing accurate and up-to-date information on its products.

However, due to continuous development in order to improve its products, LINAK products are

subject to frequent modiﬁcations and changes without prior notice. Therefore, LINAK cannot

guarantee the correct and actual status of said information on its products.

While LINAK uses its best efforts to fulﬁl orders, LINAK cannot, for the same reasons as

mentioned above, guarantee the availability of any particular product. Therefore, LINAK reserves

the right to discontinue the sale of any product displayed on its website or listed in its catalogues

or other written material drawn up by LINAK.

All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof,

please contact LINAK.

Dimension

Installation dimensions: S + 173: (with/without safety nut)

(Min. install dim. 273 mm) S + 181: (LA323. with/without safety nut)

S + 184: with splines

S + 198: with splines and safety nut

S + 210: LA32K, LA32KAS, LA32 with safety nut

S + 215: with brake

S + 267: LA32KSM

Install. dimensions: S + 173: LA32.F

S + 196: LA32FH

LA32 with quick release:

3D view of the back ﬁ xture.

(here type “01” is shown.

Drawing no.: 0321200

112

+0.2

6.1

Length

-0.2

25.9

+0.2

6.1

Ø21.9

20 Ø-0.2

25.9

Ø30

Ø0

+0.1

10.1

Ø0

+0.2

10.1

51 24.5 1311

204

S S + 173

Ø36

+0.2

Ø0

+0.2

12.1

LA32001B

LINAK A/S

Drawing no.: LA32F001C

02 05 06

01 02 05 06

Other Linak Controllers manuals

Linak

Linak HOMELINE TWINDRIVE TD2 User manual

Linak

Linak Homeline LA10 User manual

Linak

Linak LA36 Long Life User manual

Linak

Linak TWINDRIVE TD32 User manual

Linak

Linak HOMELINE LA18 IC Standard Series User manual

Linak

Linak ACTUATOR LA36 User manual

Linak

Linak TWINDRIVE TD33 User manual

Linak

Linak TECHLINE IO-Link LA25 User manual

Linak

Linak ACTUATOR LA36 Instruction manual

Linak

Linak LA18 IC Advanced User manual

Linak

Linak DESKLINE DB5 User manual

Linak

Linak ACTUATOR LA36 User manual

Linak

Linak Homeline LA18 User manual

Linak

Linak EM-322 User manual

Linak

Linak ACTUATOR LA36 User manual

Linak

Linak LA20 User manual

Linak

Linak Homeline TWINDRIVE TD5 Standard User manual

Linak

Linak DL12 User manual

Linak

Linak TR-EM-239 User manual

Linak

Linak TD4 User manual

Linak

Linak LA43IC User manual

Linak

Linak TWINDRIVE TD1 280 User manual

Linak

Linak 273 Series User manual

Linak

Linak TECHLINE LA36 Instruction manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual